Caterpillar 247B Series 3 Base

Specifications of Caterpillar 247B Series 3 Base

Engine

• Bore 84.0 mm
• Displacement 2.2 L
• Engine Model Cat® C2.2 T
• Gross Power 46.0 kW
• Gross Power SAE J1995 46.0 kW
• Net Power SAE 1349 42.0 kW
• Power – Net 42.0 kW
• Stroke 100.0 mm

Weights

• Operating Weight 3174.0 kg

Service Refill Capacities

• Cooling System 10.0 L
• Engine Crankcase 10.0 L
• Fuel Tank 65.0 L
• Hydraulic System 55.0 L
• Hydraulic Tank 35.0 L

Operating Specifications

• Breakout Force, Tilt Cylinder 1842.0 kg
• Ground Contact Area 1.14 m2
• Ground Pressure 27.3 kPa
• Rated Operating Capacities: 35% Tipping Load 683.0 kg
• Rated Operating Capacities: 50% Tipping Load 975.0 kg
• Tipping Load 1950.0 kg

Dimensions

• Bucket Pin Height at Carry Pos. 220.0 mm
• Bucket Pin Height at Max. Lift 2862.0 mm
• Clearance at Max. Lift/Dump 2134.0 mm
• Departure Angle 41°
• Ground Clearance 267.0 mm
• Height to Top of Cab 1990.0 mm
• Length of Track on Ground 1499.0 mm
• Length w/Bucket on Ground 3285.0 mm
• Length w/o Bucket 2518.0 mm
• Max. Overall Height 3799.0 mm
• Max. Reach w/Arms Parallel 1339.0 mm
• Maximum Dump Angle 40°
• Overall Length of Track 1899.0 mm
• Rack Back Angle at Max Height 82°
• Reach at Max. Lift/Dump 625.0 mm
• Turn Radius from Ctr - Bucket 2095.0 mm
• Turn Radius from Ctr - Coupler 1312.0 mm
• Turn Radius from Ctr - Rear 1377.0 mm
• Vehicle Width 1676.0 mm

Hydraulic System

• Hydraulic Flow Standard
• Hydraulic Power 23.2 kW
• Loader Hydraulic Flow 61.0 L/min
• Loader Hydraulic Pressure 23000.0 kPa

Cab

• FOPS SAE J1043 SEPT87, ISO 3449:1992 Level I
• FOPS Level II SAE J231 JAN81, ISO 3449:1992 Level II
• ROPS SAE J1040 MAY94, ISO 3471:1994

Power Train

• Travel Speed Forward 11.3 km/h
• Travel Speed Reverse 11.3 km/h