Caterpillar 24M M Series Motor Graders

Specifications of Caterpillar 24M M Series Motor Graders

Engine

• Base Power (1st gear) – Net 397.0 kW
• Base Power (all gears) – Net 397.0 kW
• Displacement 18.1 L
• Engine Model Cat® C18 ACERT™

Weights

• Gross Vehicle Weight – Base – Front Axle 19131.0 kg
• Gross Vehicle Weight – Base – Rear Axle 43595.0 kg
• Gross Vehicle Weight – Base – Total 62726.0 kg
• Gross Vehicle Weight – Maximum – Front Axle 20800.0 kg
• Gross Vehicle Weight – Maximum – Rear Axle 48535.0 kg
• Gross Vehicle Weight – Maximum – Total 65840.0 kg
• Gross Vehicle Weight – Typically Equipped 65840.0 kg
• Gross Vehicle Weight – Typically Equipped – Front Axle 19550.0 kg
• Gross Vehicle Weight – Typically Equipped – Rear Axle 46290.0 kg
• Gross Vehicle Weight – Typically Equipped – Total 65840.0 kg
• Operating Weight – Typically Equipped 65840.0 kg

Service Refill Capacities

• Circle drive housing 7.5 L
• Cooling System 90.0 L
• Engine Oil 60.0 L
• Front wheel spindle bearing housing 4.0 L
• Fuel Capacity 1326.0 L
• Hydraulic System – Tank 135.0 L
• Hydraulic System – Total 264.0 L
• Tandem housing (each) 322.0 L
• Transmission/Differential/Final Drives 184.0 L

Standards

• Brakes ISO 3450
• ROPS/FOPS ISO 3471/ISO 3449
• Sound ISO 6394/ISO 6395
• Steering ISO 5010

Operating Specifications

• Articulation Angle – left/right 25°
• Forward – 1st 3.7 km/h
• Forward – 2nd 5.7 km/h
• Forward – 3rd 9.7 km/h
• Forward – 4th 15.1 km/h
• Forward – 5th 28.0 km/h
• Forward – 6th 43.4 km/h
• Reverse – 1st 5.5 km/h
• Reverse – 2nd 14.5 km/h
• Reverse – 3rd 41.6 km/ h
• Steering Range – left/right 47.5°
• Top Speed – forward 43.4 km/h
• Top Speed – reverse 41.6 km/ h
• Turning Radius, outside front tires 12.4 m

Hydraulic System

• Circuit Type Electro-hydraulic load sensing, closed center
• Maximum System Pressure 24150.0 kPa
• Pump Output 550.0 L/min
• Pump Type Variable piston
• Standby Pressure 3100.0 kPa

Power Train

• Brakes – Parking Spring applied, hydraulically released
• Brakes – Secondary Oil-actuated, oil-disc
• Brakes – Service Oil-actuated, oil-disc
• Brakes – Service, surface area 101508.0 cm2
• Forward/Reverse Gears 6 Forward/3 Reverse
• Transmission Automatic, electronic power shift

Ripper

• Penetration force 13601.0 kg
• Pryout Force 18621.0 kg
• Ripper shank holders, quantity 7
• Ripping depth – maximum 454.0 mm
• Shank Holder Spacing – Maximum 604.0 mm
• Shank Holder Spacing – Minimum 593.0 mm

FRAME

• Circle – blade beam thickness 160.0 mm
• Circle – diameter 2631.0 mm
• Drawbar – height 215.0 mm
• Drawbar – width 225. 0 mm
• Front axle – height to center 817.0 mm
• Front axle – total oscillation per side 32°
• Front axle – wheel lean, left/right 18°

MOLDBOARD

• Arc Radius 550.0 mm
• Blade Pull – base GVW 39236.0 kg
• Blade Pull – maximum GVW 43518.0 kg
• Blade Width 7.3 m
• Cutting Edge – thickness 29.0 mm
• Cutting Edge – width 330.0 mm
• Down Pressure – base GVW 31563.0 kg
• Down Pressure – maximum GVW 34316.0 kg
• End Bit – thickness 25.0 mm
• End Bit – width 203.0 mm
• Height 1025.0 mm
• Thickness 50.0 mm
• Throat Clearance 162.0 mm
• Width 7.3 m

BLADE RANGE

• Blade Tip Range – backward 0°
• Blade Tip Range – forward 40°
• Circle Centershift – left 5332.0 mm
• Circle Centershift – right 5338.0 mm
• Maximum Blade Position Angle 35°
• Maximum depth of cut 657.0 mm
• Maximum lift above ground 634.0 mm
• Maximum shoulder reach outside of tires – left 3222.0 mm
• Maximum shoulder reach outside of tires – right 3228.0 mm
• Moldboard Sideshift – left 4528.0 mm
• Moldboard Sideshift – right 4902.0 mm

TANDEMS

• Drive chain pitch 76.0 mm
• Height 1040.0 mm
• Sidewall thickness – inner 25.0 mm
• Sidewall thickness – outer 30.0 mm
• Tandem oscillation – front down 20°
• Tandem oscillation – front up 20°
• Wheel axle spacing 2285.0 mm
• Width 353.0 mm

ENGINE – U.S. EPA TIER 4 INTERIM CERTIFIED

• Standard - Ambient Capability 50.0 ° C
• Standard - Fan Speed - Maximum 1325.0 RPM
• Standard - Fan Speed - Minimum 60.0 RPM
• Stroke 183.0 mm
• Base Power (all gears) - Net 397.0 kW
• Base Power (all gears) - Net (Metric) 397.0 kW
• Bore 145.0 mm
• Derating Altitude 2943.0 m
• Displacement 18.1 L
• Engine Model Cat® C18 ACERT™
• Maximum Torque – Net 2713.0 N·m
• Number of Cylinders 6
• Speed @ Rated Power 1800.0 RPM

ENGINE – TIER 2

• Base Power (all gears) – Net 397.0 kW
• Base Power (all gears) – Net (Metric) 397.0 kW
• Bore 145.0 mm
• Derating Altitude 3048.0 m
• Displacement 18.1 L
• Engine Model Cat C18 ACERT
• Maximum Torque – Net 2713.0 N·m
• Number of Cylinders 6
• Speed @ Rated Power 1800.0 RPM
• Standard – Ambient Capability 50.0 ° C
• Standard – Fan Speed – Maximum 1325.0 RPM
• Standard – Fan Speed – Minimum 60.0 RPM
• Stroke 183.0 mm
• Torque Rise – Net 30.0 %