Caterpillar 795F AC Mining Trucks

Specifications of Caterpillar 795F AC Mining Trucks

Engine

• Bore 175.0 mm
• Displacement 85.0 L
• Engine Model Cat C175-16
• Gross Power - SAE J1995 2536.0 kW
• Net Power 2377.0 kW
• Stroke 220.0 mm

Service Refill Capacities

• Brake/Hoist Hydraulic Tank 508.0 L
• Brake/Hoist System (Includes Tank) 1500.0 L
• Cooling System 1100.0 L
• Crankcase 310.0 L
• Final Drives, Each 341.0 L
• Fuel Tank 3596.0 L
• Fuel Tank (optional) 7192.0 L
• Steering System (Includes Tank) 300.0 L
• Steering Tank 210.0 L

Body Hoist

• Body Lower Time - Float 20.0 Seconds
• Body Power Down - High Idle 19.0 Seconds
• Body Raise Time - High Idle 17.5 Seconds
• Pump Flow - High Idle 935.0 L/min
• Relief Valve Setting - Raise 24500.0 kPa

Steering

• Steering Standards SAE J1511 OCT90 ISO 5010:1992

Operating Specifications

• Gross Machine Operating Weight (GMW) 570678.0 kg
• Nominal Payload Capacity 313.0 tonnes
• Steer Angle 34.0 Degrees
• Top Speed - Loaded 64.0 km/h
• Turning Circle Clearance Diameter 38.7 m
• Turning Diameter - Front 34.0 m

Tires

• Standard Tires Choices

Sound

• Sound Standards Standards

Final Drives

• Total Reduction Ratio 35:1

Suspension

• Effective Cylinder Stroke - Front 293.0 mm
• Effective Cylinder Stroke - Rear 141.0 mm
• Rear Axle Oscillation ±4.8°

Capacity – MSD II – 100% Fill Factor

• Heaped (SAE 2:1) 181-252 m3 (237-330 yd3)
• Struck 121.5-211 m3 (159-276 yd3)

AC Drive System

• Controls IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
• Cooling System Variable speed, hydraulic cooling system
• Generator/Alternator Brushless, remote mounted, dual bearing
• Wheel Motor Rear axle mounted Cat AC induction

Weights - Approximate

• Body Weight Range 38 500-54 500 kg (84,900-120,000 lb)
• Chassis Weight 202270.0 kg
• Gross Machine Operating Weight (GMW) 570678.0 kg

Weight Distributions - Approximate

• Front Axle - Empty* 48.0 %
• Front Axle - Loaded (Target) 33.0 %
• Rear Axle - Empty* 52.0 %
• Rear Axle - Loaded (Target) 67.0 %

ROPS

• ROPS Standards Standards

Braking System

• Blended Four Corner Retarding Standard
• Dynamic Retarding Power 4750.0 kW
• Electric Retarding - Radial Grid Design with Brushless AC Fan Motor 4750 kW (6,370 hp) rated power
• Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Front 132258.4 cm2
• Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Rear 198388.0 cm2
• Oil Cooled Brakes - Retarding Capable at All Speeds - Outside Diameter 1067.0 mm
• Oil Cooled Brakes - Retarding Capable at All Speeds - Standards J-ISO 3450 JAN88, ISO 3450:1996