Caterpillar 950H Medium Wheel Loaders

Specifications of Caterpillar 950H Medium Wheel Loaders

Engine

• Bore 110.0 mm
• Displacement 7.2 L
• Engine Model Cat® C7 ACERT™
• ISO 14396/SAE J1995 (imperial) 162.0 kW
• ISO 14396/SAE J1995 (metric) 162.0 kW
• ISO 9249/SAE J1349 (imperial) 147.0 kW
• ISO 9249/SAE J1349 (metric) 147.0 kW
• Maximum Net Power (1,900 rpm) – ISO 9249/SAE J1349 (imperial) 147.0 kW
• Maximum Net Power (1,900 rpm) – ISO 9249/SAE J1349 (metric) 147.0 kW
• Net Power – 80/1269/EEC 147.0 kW
• Net Power - ISO 9249 146.0 kW
• Peak Torque (Net) @ 1,400 rpm 907.0 N·m
• Stroke 127.0 mm

Weights

• Operating Weight 18320.0 kg

Transmission

• Forward 1 6.9 km/h
• Forward 2 12.7 km/h
• Forward 3 22.3 km/h
• Forward 4 37.0 km/h
• Reverse 1 7.6 km/h
• Reverse 2 13.9 km/h
• Reverse 3 24.5 km/h

Service Refill Capacities

• Cooling System 42.0 L
• Crankcase 30.0 L
• Differentials and Final Drives - Front 36.0 L
• Differentials and Final Drives - Rear 36.0 L
• Fuel Tank – Standard 264.0 L
• Hydraulic Tank 110.0 L
• Transmission 34.0 L

Operating Specifications

• Breakout Force 150.0 kN
• Static Tipping Load, Full Turn (ISO) 10811.0 kg
• Static Tipping Load, Full Turn (No Tire Deflection) 11540.0 kg

Dimensions

• B-Pin height – high-lift 4490.0 mm
• B-Pin height – standard 3992.0 mm
• B-Pin height @ carry – high-lift 748.0 mm
• B-Pin height @ carry – standard 624.0 mm
• Center Line of Rear Axle to Edge of Counterweight 2001.0 mm
• Center Line of Rear Axle to Hitch 1675.0 mm
• Dump Angle @ Maximum Lift 48.2 Degrees
• Ground clearance with 23.5R25 397.0 mm
• Height to Center Line of Axle 748.0 mm
• Height to Top of Exhaust Pipe 3278.0 mm
• Height to Top of Hood 2448.0 mm
• Height to Top of ROPS/FOPS 3461.0 mm
• Lift arm clearance @ high lift 4414.0 mm
• Lift arm clearance @ standard lift 3916.0 mm
• Rack Back @ Carry 49.4 Degrees
• Rack Back @ Ground 41.0 Degrees
• Rack Back @ Maximum Lift 59.5 Degrees
• Wheelbase 3350.0 mm

Hydraulic System

• Bucket/Work Tool System – Pump Output 270.0 L/min
• Hydraulic Cycle Time – Dump 2.0 Seconds
• Hydraulic Cycle Time – Float 2.5 Seconds
• Hydraulic Cycle Time – Lower 2.5 Seconds
• Hydraulic Cycle Time – Rack 2.7 Seconds
• Hydraulic Cycle Time – Raise 6.2 Seconds
• Steering System Pump Type Piston

Tires

• Tires Choose from a variety of tires to match your application.

Axles

• Front Fixed front
• Rear Oscillating ±13°

Brakes

• Brakes Meets required standards.

Cab

• ROPS/FOPS Meets SAE and ISO standards.

Buckets

• Bucket Capacities 2.5-3.5 m3 (3.25-4.5 yd3)