Caterpillar 972H (Net Power – 214.0 kW) Medium Wheel Loaders

Specifications of Caterpillar 972H (Net Power – 214.0 kW) Medium Wheel Loaders

Engine

• Bore 130.0 mm
• Displacement 12.5 L
• Engine Model Cat® C13 ACERT™
• Flywheel Power 214.0 kW
• Gross Power – SAE J1995 232.0 kW
• Net Power – 80/1269/EEC 214.0 kW
• Net Power – ISO 9249 214.0 kW
• Net Power – SAE J1349 212.0 kW
• Peak Torque (Net) @ 1,400 rpm 1332.0 N·m
• Stroke 157.0 mm

Weights

• Operating Weight 25148.0 kg

Transmission

• Forward 1 7.2 km/h
• Forward 2 12.6 km/h
• Forward 3 21.4 km/h
• Forward 4 36.9 km/h
• Reverse 1 8.2 km/h
• Reverse 2 14.2 km/h
• Reverse 3 24.3 km/h
• Reverse 4 38.8 km/h

Service Refill Capacities

• Cooling System 39.0 L
• Crankcase 35.0 L
• Differentials and Final Drives – Front 64.0 L
• Differentials and Final Drives – Rear 64.0 L
• Fuel Tank – Standard 380.0 L
• Hydraulic Tank 110.0 L
• Transmission 35.0 L

Operating Specifications

• Breakout Force 230.0 kN
• Dump Clearance 3.157 m
• Static Tipping Load, Full Turn 16903.0 kg

Dimensions

• B-Pin height – standard 4466.0 mm
• Center Line of Rear Axle to Edge of Counterweight 2461.0 mm
• Center Line of Rear Axle to Hitch 1725.0 mm
• Ground Clearance 496.0 mm
• Height to Top of Exhaust Pipe 3557.0 mm
• Height to Top of Hood 2683.0 mm
• Height to Top of ROPS 3606.0 mm
• Wheelbase 3450.0 mm

Hydraulic System

• Bucket/Work Tool System – Pump Output 305.0 L/min
• Hydraulic Cycle Time – Dump 2.1 Seconds
• Hydraulic Cycle Time – Lower, Empty, Float Down 2.4 Seconds
• Hydraulic Cycle Time – Raise 5.9 Seconds
• Hydraulic Cycle Time – Total 10.4 Seconds
• Steering System Pump Type Piston

Tires

• Tires Choose from a variety of tires to match your application.

Axles

• Front Fixed front
• Maximum Single-Wheel Rise and Fall 502.0 mm
• Rear Oscillating +/- 13°

Brakes

• Brakes Meets required standards.

Cab

• ROPS/FOPS Meets SAE and ISO standards.

Buckets

• Bucket Capacities 3.8-4.6 m3 5.0-6.0 yd3
• Bucket Width 3145.0 mm
• Maximum Bucket Capacity 4.6 m3