Caterpillar 988H (Net Power-373.0 kW) Block Handler Arrangement
Ex-showroom Price
Price not available
Variants
Specifications of Caterpillar 988H (Net Power-373.0 kW) Block Handler Arrangement
Engine
- Bore 145.0 mm
- Displacement 18.1 L
- Engine Model Cat® C18 ACERT™
- Flywheel Power 373.0 kW
- Gross Power 414.0 kW
- Gross Power – ISO 3046-2 388.0 kW
- Net Power 373.0 kW
- Net Power – EEC 80/1269 373.0 kW
- Net Power – ISO 14396 397.0 kW
- Net Power – ISO 9249 373.0 kW
- Stroke 183.0 mm
Transmission
- Converter Drive – Forward 1 6.04 km/h
- Converter Drive – Forward 2 10.8 km/h
- Converter Drive – Forward 3 19.23 km/h
- Converter Drive – Forward 4 33.96 km/h
- Converter Drive – Reverse 1 6.9 km/h
- Converter Drive – Reverse 2 12.3 km/h
- Converter Drive – Reverse 3 21.98 km/h
- Direct Drive – Forward 1 6.0 km/h
- Direct Drive – Forward 2 10.81 km/h
- Direct Drive – Forward 3 19.24 km/h
- Direct Drive – Forward 4 33.97 km/h
- Direct Drive – Reverse 1 6.9 km/h
- Direct Drive – Reverse 2 12.4 km/h
- Direct Drive – Reverse 3 22.0 km/h
Service Refill Capacities
- Cooling System 103.0 L
- Crankcase 60.0 L
- Differentials and Final Drives – Front 186.0 L
- Differentials and Final Drives – Rear 186.0 L
- Fuel Tank 712.0 L
- Hydraulic System (factory fill) 470.0 L
- Hydraulic System (tank only) 267.0 L
- Transmission 70.0 L
Steering
- Steering Meets SAE and ISO standards
- Total Steering Angle 74.0 Degrees
Operating Specifications
- Attachment Type Cat quick coupler and forks
- Hinge Pin Height, Unloaded 4909.0 mm
- Operating Weight 57276.0 kg
- Overall Length 12152.0 mm
- Tipping Load – Articulated 37° 33487.0 kg
- Tipping Load – Straight 38119.0 kg
- Turning Radius at SAE Carry 9426.0 mm
Axles
- Front Fixed
- Maximum Single-Wheel Rise and Fall 568.0 mm
- Rear Oscillating ±13°
Brakes
- Brakes Meet SAE ISO 3450:1996
Cab
- Cab – ROPS/FOPS Meets SAE and ISO standards
- Sound Performance Meets ANSI, SAE and ISO standards
Loader Hydraulic System
- Cylinders, Double Acting: Lift, Bore and Stroke 235 × 911 mm (9.3 × 35.9 in)
- Cylinders, Double Acting: Tilt, Bore and Stroke 235 × 1556 mm (9.3 × 61.3 in)
- Pilot System, Gear-Type Pump Output at 2,010 rpm and 2500 kPa (363 psi) 76.0 L/min
- Relief Valve Setting 35000.0 kPa
- Relief Valve Setting (low idle) 2400.0 kPa
Select Equipment Dealers by Brand and City
Caterpillar 988H (Net Power-373.0 kW) Block Handler Arrangement Reviews
0.0
Overall
Based on 0 Reviews
Write Review