Caterpillar CST65 CST Drive Systems

Specifications of Caterpillar CST65 CST Drive Systems

Dimensions

• KP-65 CST – Height 1060.0 mm
• KP-65 CST – Length 2910.0 mm
• KP-65 CST – Width 1530.0 mm
• P-65 CST – Height 1060.0 mm
• P-65 CST – Length 1887.0 mm
• P-65 CST – Width 1120.0 mm

Specifications

• Maximum Input Speed (motor speed) 1,500 rpm @ 50 Hz (1,800 rpm @ 60 Hz)
• Maximum Output Torque for a Short Duration (3 sec.) 650000 .0 N·m
• Weight (without oil) – In-line Drive System 7300.0 kg

Typical Application

• Description Chain Type Longwall Machinery like Armored Face Conveyors (AFC)

Maximum Output Torque (for 3 sec) Tmax [N·m]

• KP-65 CST/P-65 CST 650000.0 N· m
• Rated Power P @ 50 Hz (n = 1,480 rpm) – Ratio i [–]: 28 1200 kW
• Rated Power P @ 50 Hz (n = 1,480 rpm) – Ratio i [–]: 33 1200 kW
• Rated Power P @ 50 Hz (n = 1,480 rpm) – Ratio i [–]: 39 1000 kW
• Rated Power P @ 50 Hz (n = 1,480 rpm) – Ratio i [–]: 45 900 kW
• Rated Power P @ 50 Hz (n = 1,480 rpm) – Ratio i [–]: 50 800 kW
• Rated Power P @ 60 Hz (n = 1,800 rpm) – Ratio i [–]: 28 1,958 hp
• Rated Power P @ 60 Hz (n = 1,800 rpm) – Ratio i [–]: 33 1,958 hp
• Rated Power P @ 60 Hz (n = 1,800 rpm) – Ratio i [–]: 39 1,632 hp
• Rated Power P @ 60 Hz (n = 1,800 rpm) – Ratio i [–]: 45 1,468 hp
• Rated Power P @ 60 Hz (n = 1,800 rpm) – Ratio i [–]: 50 1,305 hp

Requirements of Cooling Water

• Maximum Water Inlet Temperature 25° C/298.15 K (77° F/298.15 K)
• Required Cooling Water Quantity 25.0 L/ min

Capacity

• KP-65 CST – Gearbox Weight (without oil) 10880.0 kg
• KP-65 CST – Oil Quantity 800.0 L
• P-65 CST – Gearbox Weight (without oil) 7300.0 kg
• P-65 CST – Oil Quantity 500.0 L

Shaft Design

• Input Shaft (cylindrical) DIN 5480-W 120 × 4
• Output Shaft with Internal Toothing DIN 5480-N 320×10