Caterpillar D6T (Tier 4 Interim/Stage IIIB) Base

Specifications of Caterpillar D6T (Tier 4 Interim/Stage IIIB) Base

Engine

• Bore 4.5 in
• Displacement 567.0 in3
• Engine Model Cat® C9.3 ACERT™
• Engine Power (Maximum) - ISO 14396 251.0 hp
• Engine Power (Maximum) - ISO 14396 (DIN) 254.0 hp
• Engine Power (Maximum) - SAE J1995 253.0 hp
• Flywheel Power 205.0 hp
• Global Emissions U.S. Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4
• Net Power (Maximum) - ISO 9249/SAE J1349 235.0 hp
• Net Power (Maximum) - ISO 9249/SAE J1349 (DIN) 238.0 hp
• Net Power (Rated) - ISO 9249/SAE J1349 207.0 hp
• Net Power (Rated) - ISO 9249/SAE J1349 (DIN) 209.0 hp
• Stroke 5.9 in

Weights

• Operating Weight 46158.0 lb
• Operating Weight - LGP A 52954.0 lb
• Operating Weight - LGP S 50490.0 lb
• Operating Weight - LGP VPAT 53651.0 lb
• Operating Weight - XL A 46791.0 lb
• Operating Weight - XL SU 46263.0 lb
• Operating Weight - XL VPAT 52167.0 lb
• Operating Weight - XW A 48922.0 lb
• Operating Weight - XW SU 48034.0 lb
• Operating Weight - XW VPAT 53170.0 lb
• Shipping Weight - LGP A 43664.0 lb
• Shipping Weight - LGP S 43664.0 lb
• Shipping Weight - LGP VPAT 48521.0 lb
• Shipping Weight - XL A 39138.0 lb
• Shipping Weight - XL SU 39138.0 lb
• Shipping Weight - XL VPAT 47165.0 lb
• Shipping Weight - XW A 40596.0 lb
• Shipping Weight - XW SU 40596.0 lb
• Shipping Weight - XW VPAT 45840.0 lb

Transmission

• 1.5 Forward 2.3 mph
• 1.5 Reverse 3.0 mph
• 2.0 Forward 3.2 mph
• 2.0 Reverse 4.1 mph
• 2.5 Forward 4.1 mph
• 2.5 Reverse* 5.2 mph
• 3.0 Forward 5.3 mph
• 3.0 Reverse* 5.3 mph
• 3.5 Forward 7.1 mph
• 3.5 Reverse* 9.0 mph
• Drawbar Pull - 1.5 Forward 81430.0 lb
• Drawbar Pull - 2.0 Forward 49260.0 lb
• Drawbar Pull - 2.5 Forward 49260.0 lb
• Drawbar Pull - 3.0 Forward 26730.0 lb
• Drawbar Pull - 3.5 Forward 26730.0 lb

Service Refill Capacities

• Cooling System 17.0 gal
• Engine Crankcase 6.5 gal
• Final Drives (each) 3.6 gal
• Fuel Tank 112.0 gal
• Hydraulic Tank 17.3 gal
• Pivot Shaft Compartment 1.3 gal
• Power Train 39.1 gal
• Roller Frames (each) 6.6 gal

Standards

• Brakes Brakes meet the International Standard ISO 10265:2008.
• Cab Meets appropriate standards as listed below.
• ROPS/FOPS ROPS meets criteria ISO 3471:1994, 2008. FOPS meets ISO 3449:1992, 2005 Level II.

Blades

• Capacity - LGP A-Blade 6.82 yd3
• Capacity - LGP S-Blade 4.83 yd3
• Capacity - LGP VPAT-Blade 6.65 yd3
• Capacity - XL A-Blade 5.14 yd3
• Capacity - XL SU-Blade 6.94 yd3
• Capacity - XL VPAT-Blade 6.19 yd3
• Capacity - XW A-Blade 5.63 yd3
• Capacity - XW SU-Blade 6.6 yd3
• Capacity - XW VPAT-Blade 6.65 yd3
• Width - LGP A-Blade 16.7 ft
• Width - LGP S-Blade 13.3 ft
• Width - LGP VPAT-Blade 13.7 ft
• Width - XL A-Blade 13.7 ft
• Width - XL SU-Blade 10.7 ft
• Width - XL VPAT-Blade 12.8 ft
• Width - XW A-Blade 14.8 ft
• Width - XW SU-Blade 11.7 ft
• Width - XW VPAT-Blade 13.7 ft

Undercarriage

• Carrier Rollers/Side 1
• Ground Clearance 15.0 in
• Ground Contact Area: (ISO 16754) - LGP 10122.0 in2
• Ground Contact Area: (ISO 16754) - LGP VPAT 8684.0 in2
• Ground Contact Area: (ISO 16754) - XL 5489.0 in2
• Ground Contact Area: (ISO 16754) - XL VPAT 5489.0 in2
• Ground Contact Area: (ISO 16754) - XW 7449.0 in2
• Ground Contact Area: (ISO 16754) - XW VPAT 7909.0 in2
• Ground Pressure: (ISO 16754) - LGP 4.99 psi
• Ground Pressure: (ISO 16754) - LGP VPAT 6.2 psi
• Ground Pressure: (ISO 16754) - XL 8.4 psi
• Ground Pressure: (ISO 16754) - XL VPAT 9.5 psi
• Ground Pressure: (ISO 16754) - XW 6.4 psi
• Ground Pressure: (ISO 16754) - XW VPAT 6.7 psi
• Grouser Height 2.6 in
• Oscillation at Front Idler - XL/XL VPAT 5.5 in
• Oscillation at Front Idler - XW 5.4 in
• Oscillation at Front Idler - XW VPAT/LGP/LGP VPAT VPAT 6.4 in
• Pitch 8.0 in
• Shoe Type Moderate Service
• Shoes/Side - XL/XL VPAT/XW 41
• Shoes/Side - XW VPAT/LGP/LGP VPAT 45
• Track gauge - XL 74.0 in
• Track Gauge - XL VPAT 84.0 in
• Track Gauge - XW 80.0 in
• Track Gauge - XW VPAT/LGP/LGP VPAT 90.0 in
• Track on Ground - XL/XL VPAT/XW 112.0 in
• Track on Ground - XW VPAT/LGP/LGP VPAT 128.0 in
• Track Rollers/Side - XL/XL VPAT/XW 7
• Track Rollers/Side - XW VPAT/LGP/LGP VPAT 8
• Width of Shoe - LGP 36.0 in
• Width of Shoe - LGP VPAT 31.0 in
• Width of Shoe - XL/XL VPAT 22.0 in
• Width of Shoe - XW 30.0 in
• Width of Shoe - XW VPAT 28.0 in

Ripper

• Beam Cross Section 219 mm × 254 mm (8.8 in × 10 in)
• Maximum Clearance Raised (under tip) 20.2 in
• Maximum Penetration 19.7 in
• Maximum Penetration Force 14557.0 lb
• Number of Pockets 3
• Overall Beam Width 87.0 in
• Pocket Spacing 39.4 in
• Pryout Force 19600.0 lb
• Ramp Angle 26 degrees
• Shank Gauge 78.8 in
• Shank Section 74 mm × 175 mm (2.9 in × 6.9 in)
• Type Fixed Parallelogram
• Weight - Each Additional Shank 163.0 lb
• Weight - With One Shank 3606.0 lb

Winch

• Cable Ferrule Size (O.D. × Length) 54 mm × 67 mm (2.1 in × 2.6 in)
• Control Electric
• Drum Capacity - 22 mm (0.88 in) 281.0 ft
• Drum Capacity - 25 mm (1.0 in) 218.0 ft
• Drum diameter 10.0 in
• Drum width 12.4 in
• Flange Diameter 19.9 in
• Increased Tractor Length - LGP 14.4 in
• Increased Tractor Length - XL/XW 20.4 in
• Maximum Bare Drum - Line Pull 89800.0 lb
• Maximum Bare Drum - Line Speed 130.0 ft/min
• Maximum Full Drum - Line Pull 76300.0 lb
• Maximum Full Drum - Line Speed 224.0 ft/min
• Oil Capacity 17.8 gal
• Overall width 38.4 in
• Rope Diameter (recommended) 0.88 in
• Weight 2652.0 lb
• Winch and Bracket Length 47.8 in
• Winch Case - Length 35.5 in
• Winch Case - Width 34.3 in
• Winch Drive Mechanical
• Winch Model PA56

Hydraulic Controls - Pump

• Angle Cylinder Flow - VPAT 45.0 gal/min
• Lift Cylinder Flow 50.0 gal/min
• Pump Output - Fan 25.0 gal/min
• Pump Output - Implement 54.0 gal/min
• Pump Output - Steering 52.0 gal/min
• Ripper Cylinder Flow 50.0 gal/min
• RPM at Rated Engine Speed - Fan 2135.0 RPM
• RPM at Rated Engine Speed - Implement 2135.0 RPM
• RPM at Rated Engine Speed - Steering 2854.0 RPM
• Tilt Cylinder Flow 29.0 gal/min

Hydraulic Controls - Main Relief Valve

• Pressure Setting - Implement - Non-VPAT 3150.0 psi
• Pressure Setting - Implement - VPAT 3540.0 psi

Hydraulic Controls - Maximum Operating Pressure

• Bulldozer - Angle - VPAT 3125.0 psi
• Bulldozer - Lift - Non-VPAT 2800.0 psi
• Bulldozer - Lift - VPAT 3125.0 psi
• Bulldozer - Tilt - Non-VPAT 2800.0 psi
• Bulldozer - Tilt - VPAT 3125.0 psi
• Ripper - Lift - Non-VPAT 2800.0 psi
• Ripper - Lift - VPAT 3125.0 psi
• Steering 5800.0 psi