Caterpillar SU488 D Scoops

Specifications of Caterpillar SU488 D Scoops

Transmission

• Make/Model Dana 32000 series
• Speeds, Forward and Reverse 4
• Type Power shift with Fwd/Rev mod

Specifications

• Height to Top of Cab 1120.0 mm
• Length 9880.0 mm
• Payload Capacity 14.5 tonnes

Hydraulic System

• Auxiliary System Open center, HRO Control
• Bucket/PTO System Open center/Motor Spool
• Steer/Brake System Open center, HRO Control
• Tank type Sealed

Dimensions (Approximate)

• Adjustable Cab Height (minimum) – 35x15-15 Tires 1257.0 mm
• Adjustable Cab Height (minimum) – 38x16-15 Tires 1295.0 mm
• Adjustable Cab Height (minimum) – 44x18-20 Tires 1372.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 35x15-15 Tires 267.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 38x16-15 Tires 267.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 44x18-20 Tires 267.0 mm
• Inside turn radius 3660.0 mm
• Main Frame Height – 35x15-15 Tires 978.0 mm
• Main Frame Height – 38x16-15 Tires 1016.0 mm
• Main Frame Height – 44x18-20 Tires 1092.0 mm
• Outside turn radius 8940.0 mm
• Overall Length – With contoured bucket 9880.0 mm
• Overall Length – With lifting forks 8970.0 mm
• Overall Width – With contoured bucket 2920.0 mm
• Overall Width – With lifting forks 2720.0 mm
• Scoop utility empty weights 22680.0 kg
• Scoop utility empty weights – with 3,000 lb Ballast 24040.0 kg
• Steering articulation 80°
• Wheelbase 3860.0 mm

Wheels

• Make/Model 3 piece ( Heavy Duty)

ELECTRICAL SYSTEM

• Polarity Floating
• Type Approved flameproof
• Voltage 12

ENGINE SPEEDS

• High Idle 2350.0 RPM
• Low Idle 1000.0 RPM

START SYSTEM

• Type Pneumatic gear reduction

INTAKE AIR CLEANER

• Intake Dual Element Type Primary & Secondary
• Type Dry

TORQUE CONVERTER

• Make/Model Dana integral
• Type Mounted on engine, single element

TIRES – STANDARD

• Load 9120 kg @ 8 km/h (20,100 lb @ 5 mph)
• Size: 35x15-15 – Inflation media Urethane Fill
• Size: 35x15-15 – Ply rating Bias
• Size: 38x16-15 – Inflation media Urethane Fill
• Size: 38x16-15 – Ply rating Bias
• Size: 44x18-20 – Inflation media Urethane Fill
• Size: 44x18-20 – Ply rating Bias

ARTICULATION

• Bearing type and size Pin & bearing
• Bush material Hardened steel
• Degrees of Turn Either Side 45.0 Degrees
• Pin material Hardened steel

OSCILLATION

• Degrees Up and Down from Horizontal 15.0 Degrees
• Type Ball Bearing at Articulation

SEATING (DRIVER)

• Type Adjustable Cross-seated

CANOPY

• Type Adjustable CAB Certified to MSHA req

LIGHTS

• Number/Location 2 front, 2 rear
• Type VICTOR

ALTERNATOR

• Drive Hydraulic
• Type Caterpillar Flameproof

PNEUMATIC SYSTEM

• Air Receiver Volume 106.0 L
• Compressor Type Piston engine gear driven
• Governed Pressure 1.03 Mpa
• Relief Pressure 1.45 Mpa

SERVICE CAPACITIES

• Fuel Tank 132 L (35 gal) – MSHA Limited
• Hydraulic Tank 265.0 L
• With 35x15-15 Tires – 1st gear max 2.9 km/h
• With 35x15-15 Tires – 2nd gear max 6.0 km/ h
• With 35x15-15 Tires – 3rd gear max 10.3 km/h
• With 35x15-15 Tires – 4th gear max 17.9 km/h

GRADE ABILITY

• Front to Rear Up to 30%

HYDRAULIC FILTRATION

• Auxiliary System Pressure 10 micron; Tank mounted, 25 micron
• Bucket/PTO System Pressure 10 micron
• Common Return replaceable bypass
• Steer/Brake System Pressure 10 micron

AXLES (FRONT/REAR)

• Differential Type Hydraulic Actuated, Bevel Gear and Pinion Forced Brake Cooling
• Make/Model Kessler 72 Series
• Type Outboard Planetary/SAHR Brakes

MAXIMUM TRACTIVE EFFORT

• Reference Refer to engineering for information dependent on the applications

STEERING SYSTEM

• Actuation HRO Control
• Control Valve Open center

ENGINE (4 CYLINDER)

• Cooling Fan Hydraulic driven fan
• Cooling System water based radiator
• Displacement 4.8 L
• Engine Make/Model Caterpillar/ Deutz 1013 FC
• Maximum Power Tested 112 kW (150 hp) @ 2,300 rpm
• Maximum Torque Tested 651.0 N·m
• Type Diesel, Turbo Charged, and 4 Cycle

CYLINDERS

• Counterbalance load Lock valves Lift & Tilt (opt)
• Rods Hard chromed
• Type Double acting

ACCUMULATOR BRAKES

• Operation Pre charge 6.2 Mpa (900 psi) – Nitrogen pressure
• Quantity x capacity 1.9 L
• Type Piston

BUCKET SYSTEM

• Actuation HRO
• Control Valve Open center

Lift and Carry Capacity

• Capacity 14.5 tonnes (16 tons) at 914 mm (36 in) from the face of lift plate

Exhaust System

• After Treatment Dry Scrubber
• DPM Control Disposable filter 97% eff
• Make Evarpar/ ECS
• Type Preliminary DOC

Main Hydraulic Pump

• Std pump output @ 2,000 rpm 106.0 L/min
• Type Gear

Cooling/Fan Pump

• Std pump output @ 2,000 rpm 17/45 L/min (4.5/12 gal/min)
• Type Gear