Price not available
Caterpillar SU488 DM Scoops
Variants
Specifications of Caterpillar SU488 DM Scoops
Specifications
- Height to Top of Body 965.0 mm
- Height to Top of Cab 1170.0 mm
- Length 9576.0 mm
- Payload Capacity 14.5 tonnes
- Width 2920.0 mm
Brakes
- Service and Emergency/Park 1 Spring applied hydraulic release SAHR
- Service and Emergency/Park 2 4-wheel wet disc
- Service and Emergency/Park 3 Controlled by reverse modulating valve
- Service and Emergency/Park 4 Left pedal activated
Dimensions (Approximate)
- Adjustable Cab Height – 35x15-15 Tires 1270 mm-1524 mm (4 ft 2 in-5 ft 0 in)
- Adjustable Cab Height – 38x16-15 Tires 1295 mm-1549 mm (4 ft 3 in-5 ft 1 in)
- Adjustable Cab Height – 44×18-20 Tires 1346 mm-1600 mm (4 ft 5 in-5 ft 3 in)
- Battery Height from Ground – With 64-SS100-21 Battery: 35×15-15 Tires 990.0 mm
- Battery Height from Ground – With 64-SS100-21 Battery: 38×16-15 Tires 1067.0 mm
- Battery Height from Ground – With 64-SS100-21 Battery: 44×18-20 Tires 1118.0 mm
- Battery Height from Ground – With 64-SS125-21 Battery: 35×15-15 Tires 1041.0 mm
- Battery Height from Ground – With 64-SS125-21 Battery: 38×16-15 Tires 1067.0 mm
- Battery Height from Ground – With 64-SS125-21 Battery: 44×18-20 Tires 1118.0 mm
- Battery Height from Ground – With 64-SS85-21 Battery: 35×15-15 Tires 914.0 mm
- Battery Height from Ground – With 64-SS85-21 Battery: 38×16-15 Tires 965.0 mm
- Battery Height from Ground – With 64-SS85-21 Battery: 44×18-20 Tires 1016.0 mm
- Ground Clearance (Nominal) (Please reference sales drawing for Ground Clearance profile) – 35x15-15 Tires 279.0 mm
- Ground Clearance (Nominal) (Please reference sales drawing for Ground Clearance profile) – 38x16-15 Tires 305.0 mm
- Ground Clearance (Nominal) (Please reference sales drawing for Ground Clearance profile) – 44×18-20 Tires 356.0 mm
- Inside turn radius 3835.0 mm
- Main Frame Height – 35x15-15 Tires 899.0 mm
- Main Frame Height – 38x16-15 Tires 914.0 mm
- Main Frame Height – 44x18-20 Tires 965.0 mm
- Outside turn radius 7366.0 mm
- Overall Length – Standard with Bucket 9931.0 mm
- Overall Length – VLT with Contoured Bucket 10439.0 mm
- Overall Length – VLT with Lift Plate Attachment 9881.0 mm
- Overall Length – VLT with Lifting Forks 9576.0 mm
- Overall Width – Standard with Bucket 2819.0 mm
- Overall Width – VLT with Contoured Bucket 3037.0 mm
- Steering articulation 80° total
- Tram Speed 8.0 km/h
- Un-A-Trac Empty Weights – Less Battery 19731.0 kg
- Un-A-Trac Empty Weights – With 64-SS100-21 Battery 26853.0 kg
- Un-A-Trac Empty Weights – With 64-SS85-21 Battery 24857.0 kg
- Wheelbase 4699.0 mm
Drive Train
- Axles 1 Brake cooling
- Axles 2 Optional Dif- Lok
- Axles 3 Bucyrus Proprietary
- Axles 4 Heavy Duty
- Axles 5 Alternate axles will be considered upon request
- Axles 6 SAHR brakes
- Axles 7 SAHR brakes Features outboard planetary
- Axles 8 35 834 kg (79,000 lb) capacity axle
- Drive Lines 1 Heavy duty off- highway
- Drive Lines 2 7C type driveshafts with slip joints
- Reducer A foot mounted 4.58:1 ratio gearbox
- Tram Motor 1 Non-ventilated cooling
- Tram Motor 2 Foot mounted
- Tram Motor 3 Direct current
- Tram Motor 4 Mine traction
- Tram Motor 5 Two proprietary design
- Tram Motor 6 MSHA totally enclosed explosion proof
- Tram Motor 7 Gear motor rated at 37 kW (50 hp) (1 hour) at 1,540 rpm and 110 volts
Hydraulics
- Valve Banks 1 Six section, parallel (flow through) type with 15 513 MPa (2,250 psi) internal relief and 8274 MPa (1,200 psi) steering relief.
- Valve Banks 2 Valve bank is rated at 15 L/m (40 gpm).
- Hydraulic Hose and Fittings JIC fittings with high pressure hosing, MSHA 2G flame resistant approved.
- Hydraulic PTO Two (2) quick coupler connections, 8274 MPa (1,200 psi) maximum recommended operating pressure.
- Lift Cylinder Two (2) 7 in bore, double acting cylinders with forged rods and self-aligning bushings.
- Pump 1 Pump is directly mounted to the pump motor housing.
- Pump 2 Fixed displacement
- Pump 3 Helical gear tantum pumps rated at 91 L/m (24 total gpm) at 1,600 rpm
- Pump Motor 1 Foot mounted
- Pump Motor 2 Non-ventilated cooling
- Pump Motor 3 MSHA totally enclosed explosion proof
- Pump Motor 4 Motor rated at 12 kW (16 hp) (1 hour)
- Pump Motor 5 Direct current
- Pump Motor 6 Laminated frame
- Pump Motor 7 Mine duty
- Pump Motor 8 110 Volts DC
- Reservoir 1 189 L (50 gal) capacity with magnetic particle sump strainer and 10 micron return line filter with by-pass.
- Reservoir 2 A dipstick is provided in the top of the oil tank for oil level monitoring.
- Reservoir Fill System Fill cap assembly in top of reservoir tank.
- Steering Cylinder Two (2) 5 in bore, double acting cylinders with forged rods and self-aligning bearings.
FRAME
- Components 1 Heavy duty with bends utilized where applicable to reduce the number of indeterminate stresses introduced by welding.
- Components 2 Extended operator’s deck with side egress access.
- Components 3 Constructed of ASTM 572-GR50 steel with T-1 steel at high stress or wear areas.
MANUALS
- Types 1 Two Battery Maintenance Manual
- Types 2 Two Parts Manuals
- Types 3 One LinkOne CD which includes all above manuals in electronic format
- Types 4 Two Electrical Troubleshooting Guide
- Types 5 Two Battery Maintenance Chart
- Types 6 Two Operation and Preventive Maintenance Manuals
FIRE SUPPRESSION
- Type Four point, 9 kg (20 lb), multi-purpose, ABC dry chemical fire suppression system; manually actuated.
CENTER SECTION
- Components 1 Heavy duty ball bearing with unlimited oscillation.
- Components 2 Pivot points designed to distribute loads using self-aligning, one piece heavy duty radial bearings.
- Components 3 Internal grease seals to prevent contamination of the ball bearings.
OPERATOR’S COMPARTMENT
- Components 1 Extended operator’s deck
- Components 10 Control station
- Components 2 Right foot accelerator pedal
- Components 3 Left foot brake pedal
- Components 5 Tape strip panic switch that de-energizes electrical system and applies automatic brake
- Components 6 Park brake release pressure gauge
- Components 7 Warning gong
- Components 8 Accumulator pressure gauge
- Components 9 Manual circuit breaker lever reset handle
- Valve Bank Hydraulic Functions: • Steering • Bucket • Bucket Eject • Winch/Power Take Off • Battery Changer
Electrical Controls
- Types 1 Model BUC2000, microprocessor controlled, IGBT, contactorless, 128V DC, 1200 amp traction motor controller.
- Types 2 Mine duty, 600 amp frame circuit breaker, with UVR (under voltage release) trip unit.
- Types 3 Microprocessor controlled, IGBT, contactorless, 128V DC, 350 amp, pump motor controller.
Tire/Wheel Option
- Options 1 35×15-15 Tires – Customer specified tire brand and fill type.
- Options 2 44×18-20 Tires – Customer specified tire brand and fill type.
- Options 3 38×16-15 Tires – Customer specified tire brand and fill type.
Operator Control Options
- Options 1 Left hand control stick that incorporates the most common operator functions
- Options 2 Ergonomically designed control stick for one hand control.
- Options 3 Manual Disconnect Switch
- Options 4 Tapeswitch stop switches located on both sides of operator.
- Options 5 Speed control accomplished by right foot activated pedal.
Battery Plug – Single Connector Option
- J&R 2000, 5-pole, Brass w/Captive Wrench 1 Brass plug with a captive wrench to install or remove the battery plugs. Battery plug is rated at 600 amps.
- J&R 2000, 5-pole, Brass w/Captive Wrench 2 Other connector options available upon request
Lighting System Option
- Options 1 Ocenco, Halogen, 12V DC, 50 watt – Two front headlights with protective guard, and two rear headlights with protective guard.
- Options 2 MCI 12V
- Options 3 MCI 120V
Auxiliary Components
- Components Battery Change Cables
Machine Battery
- Components 1 Battery Tray
- Components 2 Battery Filling System
- Components 3 Battery Receptacle Kit
- Components 4 Battery with Plastisol Coated Tray (Single Connector)
Battery Charger Options
- Options 1 Dual output for two batteries
- Options 2 Single output for one battery
Operator’s Compartment Options
- Options 1 Dif-Lok hydraulically activated differential lock that allows 4 wheels to have equal torque during difficult floor conditions.
- Options 2 533 mm (21 in) deck extension to provide better visibility in the lower seams
Lift Attachment Option
- Options 1 QDS Quick Attach Module (required for all QDS attachments)
- Options 2 QDS Battery carrier
- Options 3 QDS Fork Assembly
Winch Option
- Options 1 Requires operator cab in lieu of canopy.
- Options 2 Winch – 13 608 kg (30,000 lb) bare drum pull, two speed winch assembly with 21 363 mm (70 ft) of ¾ in diameter steel cable.
Cab Options (cab must be utilized when winch is selected)
- Options 1 Hydraulic
- Options 2 Manual
Center Section Cable Location Option
- Components 1 Cables are protected with additional guarding and covers. This will add 76 mm (3 in) to overall frame height.
- Components 2 All cables over the top of center section.
Battery Charger Accessories
- Heavy-duty Charger Case Sled consisting of heavy duty, protection frame work and equipped with lifting mechanisms.
Other Options
- Option 1 Traction Motor Over Speed Protection
- Option 2 Schroder Test Mate
- Option 3 Pa approval Kit
- Option 4 BUC 2000 Hand Held Calibrator (Control Adjustments and Troubleshooting
- Option 5 Center Section Lock Bar
- Option 6 Park Brake Pressure Switch
Lift Capacity
- Capacity 14.5 tonnes (16 tons) at 914 mm (36 in) from the face of lift plate