Hyundai Equipment R220LC-9 Base

Specifications of Hyundai Equipment R220LC-9 Base

Engine

• Engine Model Cummins 6BTA-5.9C
• Gross Power 150 HP (112 kW) @ 1950 rpm
• Max Torque 610 Nm (450 lbf.ft) @ 1500 rpm
• Power – Net 143 HP (105 kW) @ 1950 rpm
• Type 6 Cylinder in line water cooled

Dimensions

• Ground clearance, counterweight 1060
• Minimum ground clearance 480
• Overall height of cabin 2920
• Overall Length 9570
• Overall Length crawler 4440
• Overall Width 2990
• overall width of uperstructure 2740
• Rear end length 2770
• Tail swing radius 2840
• Track Gauge 2390
• Track Shoe Width 600
• Tumbler distance (mm) 3650

Hydraulic System

• Maximum flow. 2 x 220 Ipm
• Pump Type Two variable displacement piston pump
• Relief Valve impliment circuit 350(380) kgf/cm²
• Relief Valve travel 330 kgf/cm²

Brakes

• Drive method Fully hydrostatic type
• Drive motor Axial piston motor in-shoe design
• Parking brakes multi wet disk

Undercarriage

• No. of carrier rollers each side 2
• No. of shoe each side 49
• No. of track rollers 9

SWING SYSTEM

• Swing bearing lubrication Grease bathed
• Swing brake Multi wet disc
• Swing motor Axial piston motor
• Swing reduction Planetary gear reduction
• Swing speed 12 rpm

WORKING RANGE

• Max. digging depth 6220
• Max. digging height 9340
• Max. digging reach 9500
• Max. digging reach at ground level 9330
• Max. dumping height 6520
• Min. swing radius 3740