Volvo L150G Base

Specifications of Volvo L150G Base

Engine

• Air Cleaner Three-stage Cyclone precleaner - primary filter - secondary filter.
• Cooling System Hydrostatic, electronically controlled fan and intercooler of the air-to-air type.

Transmission

• 1st gear 6.5
• 2nd gear 12.5
• 3rd gear 26.0
• 4th (limited by ECU) 38.0
• Front axle/rear axle Volvo/AWB 40B/40B
• Ground clearance at 13° osc. 610
• Measured with tires 26.5 R25 L3

Service Refill Capacities

• Axle oil front/rear 45/55
• Engine Coolant 46
• Engine Oil 50
• Fuel Tank 335
• Hydraulic oil tank 156
• Transmission oil 48

Hydraulic System

• Cycle times 5.9s
• engine speed 32(1 900)r/s(r/min)
• Flow 180l/min
• Pilot system, working pressure 3.5MPa
• Total Cycle Time 11.6s
• Working pressure, maximum 29.0 MPA

Brakes

• Parking brakes Fully sealed, wet multi-disc brake built into the transmission. Applied by spring force and electro-hydraulically release dwith a switch on the instrument panel.
• Secondary brake Dual brake circuits with rechargeable accumulators. One circuit or the parking brake fulfills all safety requirements.
• Standards The brake system complies with the requirements of ISO 3450

ELECTRICAL SYSTEM

• Alternator 2 280/80 WA
• Batteries 2 x 12V
• Battery Capacity 2x170 Ah
• Cold cranking capacity, approx 1000 A
• Starter motor 7.0 KW
• Voltage 24 V

STEERING SYSTEM

• Cylinder bore 100 mm
• Maximum articulation ±37°
• Maximum flow 188l/min
• Rod diameter 600 MM
• Steering cylinders 2
• Stroke 390mm
• Working pressure 21 MPa