Volvo L250G Base

Specifications of Volvo L250G Base

Engine

• Air Cleaner Three-stage Cyclone precleaner - primary filter -secondary filter
• Cooling System Hydrostatic, electronically controlled fan and intercooler of the air-to-air type

Transmission

• 1st gear 7,0
• 2nd gear 11,5
• 3rd gear 24,5
• 4th (limited by ECU) 38,0
• Front axle/rear axle AWB 50B / 41
• Ground clearance at 13° osc. 600
• Measured with tires 29,5R25 L4

Service Refill Capacities

• Axle oil front/rear 77 / 71
• Engine Coolant 46
• Engine Oil 50
• Fuel Tank 335
• Hydraulic oil tank 226
• Transmission oil 48

Hydraulic System

• engine speed 32 (1900)
• Flow 252
• Pilot system, working pressure 3,2 - 4,0
• Total Cycle Time 13,1
• Working pressure, maximum 29,0 ± 0,5

Brakes

• Accumulators 2 x 1,0 + 1 x 0,5
• Number of brake discs per wheel front/rear 1
• Parking brakes Fully sealed, wet multi-disc brake built into the transmission. Applied by spring force, electro-hydraulic release with a switch on the instrument panel.
• Secondary brake Dual brake circuits with rechargeable accumulators. One circuit or the parking brake fulfills all safety requirements
• Standards The brake system complies with the requirements of ISO 3450

ELECTRICAL SYSTEM

• Alternator 2280 / 80
• Batteries 2 x 12
• Battery Capacity 2 x 170
• Cold cranking capacity, approx 1000
• Starter motor 7,0
• Voltage 24 V

STEERING SYSTEM

• Cylinder bore 100
• Maximum articulation 37
• Maximum flow 202
• Rod diameter 60
• Stroke 525
• Working pressure 21,0 ± 0,35