Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base

Specifications of Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base

Engine

• Bore 4.13 in
• Displacement 402.75 in3
• Emissions U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4
• Engine Model Cat® C6.6 ACERT™
• Engine Power – ISO 14396 155.0 hp
• Engine Power – ISO 14396 (DIN) 157.0 hp
• Flywheel Power 130.0 hp
• Gross Power – SAE J1995 158.0 hp
• Net Power – EU 80/1269/EEC 130.0 hp
• Net Power – ISO 9249 130.0 hp
• Net Power – ISO 9249 (DIN) 132.0 hp
• Net Power – SAE J1349 128.0 hp
• Stroke 4.99 in

Weights

• Operating Weight 29346.0 lb
• Operating Weight – LGP 30750.0 lb
• Operating Weight – XL 29346.0 lb
• Shipping Weight – LGP 30353.0 lb
• Shipping Weight – XL 28949.0 lb
• Weight – LGP 30144.0 lb
• Weight – XL 28740.0 lb

Service Refill Capacities

• Cooling System 8.58 gal
• Engine Crankcase 4.35 gal
• Final Drives (each LGP) 6.0 gal
• Final Drives (each XL) 4.0 gal
• Fuel Tank 77.9 gal
• Hydraulic Tank 15.3 gal

Standards

• Brakes Standards
• Cab Standards
• ROPS/FOPS Standards

Blades

• Blade Type VPAT, VPAT Foldable*
• LGP, VPAT – Blade Capacity 4.38 yd3
• LGP, VPAT – Blade Width over End Bits 12.0 ft
• XL, VPAT – Blade Capacity 4.01 yd3
• XL, VPAT – Blade Width over End Bits 10.5 ft

Undercarriage

• Ground Contact Area – LGP 6200.0 in2
• Ground Contact Area – XL 4650.0 in2
• Ground Pressure – LGP (ISO 16754) 4.45 psi
• Ground Pressure – XL (ISO 16754) 5.77 psi
• Grouser Height 1.9 in
• Shoes/Side – LGP 40
• Shoes/Side – XL 40
• Track Gauge – LGP 79.0 in
• Track Gauge – XL 70.0 in
• Track on Ground – LGP 104.0 in
• Track on Ground – XL 104.0 in
• Track Rollers/Side – LGP 8
• Track Rollers/Side – XL 8
• Width of Shoe – LGP 30.0 in
• Width of Shoe – XL 22.0 in

Ripper

• Beam Cross Section 165 × 211 mm (6.5 × 8.3 in)
• Each Additional Shank 75.0 lb
• Maximum Penetration – XL & LGP 14.2 in
• Maximum Penetration Force – LGP 10138.0 lb
• Maximum Penetration Force – XL 9480.0 lb
• Maximum Pry-out Force – LGP 37480.0 lb
• Maximum Pry-out Force – XL 37480.0 lb
• Number of Pockets 3
• Overall Beam Width 76.8 in
• Pocket Spacing 35.3 in
• Shank Gauge 70.6 in
• Shank Section 58.5 × 138 mm (2.3 × 5.4 in)
• Type Fixed Parallelogram
• Weight – With One Shank 1863.0 lb

Winch

• Cable Ferrule Size (Length) 2.63 in
• Cable Ferrule Size (O.D.) 2.13 in
• Drum Capacity (Optional Rope) 220.0 in
• Drum Capacity (Recommended Rope) 306.0 in
• Drum diameter 8.0 in
• Drum width 11.0 in
• Flange Diameter 18.0 in
• Maximum Bare Drum – Line Pull 50000.0 lb
• Maximum Bare Drum – Line Speed 124.0 ft/min
• Maximum Full Drum – Line Pull 26000.0 lb
• Maximum Full Drum – Line Speed 230.0 ft/min
• Optional Cable Size 0.87 in
• Rope Diameter (recommended) 0.75 in
• Weight* 2000.0 lb
• Winch and Bracket Length 33.2 in
• Winch Case – Width 35.6 in
• Winch Drive Hydrostatic
• Winch Model PA50

Transmission – Travel Speed

• Forward 0-10 km/h (0-6.2 mph)
• Reverse 0-10 km/h (0-6.2 mph)
• Transmission Type Hydrostatic

Sustainability

• Engine Emissions Fully complies with U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 emission standards
• Sound Levels – Average Exterior Sound Pressure Level 79 dB(A) (SAE J88:2006)
• Sound Levels – Dynamic Operator Sound Pressure Level (LpA)* 78 dB(A) (ISO 6396:2008)
• Sound Levels – Maximum Sound Power Level 109 dB(A) (2000/14/EC)
• Vibration Levels – Maximum Hand/Arm** 2.5 m/s2 (ISO 5349:2001)
• Vibration Levels – Maximum Whole Body 0.5 m/s2 (ISO/TR 25398:2006)
• Vibration Levels – Seat Transmissibility Factor <0.7 ISO 7096:2000 – spectral class EM6