Caterpillar FH110 Face Haulers

Specifications of Caterpillar FH110 Face Haulers

Specifications

• Empty Weight 37.2 tonnes
• Engine N/A
• Ground Clearance 254 or 305 mm (10 or 12 in)
• Load Discharge Time 24.0 Seconds
• Max. Carrying Capacity 9 tonnes (10 tons) 15 m3 (530 ft3)
• Max. Tram Speed 8.0 km/h
• Operating Height 0.99­-1.52 m (39-60 in)
• Overall Length (with tailgate) 11.89 m
• Overall Width 3.66 m
• Power Dual 26 kW (35 hp) DC motors
• Power Type Battery
• Wheel/Tires 889 or 965 mm (35 or 38 in)

Brakes

• Automatic Brake 1 Spring-applied, hydraulic-released braking system controlled by electrical/hydraulic solenoid
• Automatic Brake 2 Equipped with totally enclosed multiple wet disc brake in each drive unit
• Automatic Brake 3 Equipped with manual hand pump brake release and glycerin-filled pressure monitoring gauge
• Service Two (2) hydraulic actuated, multiple wet disc brakes

Dimensions (Approximate)

• Frame Height 914-990 mm (36-39 in)
• Ground Clearance – with 35" Tires 194.0 mm
• Inside Turning Radius 3.6 m
• Minimum Canopy Height – with 35" Tires 3.6 m 1092.0 mm
• Minimum Entry Width 4.62 m
• Operating Height 1066-1524 mm (42-60 in)
• Outside Turning Radius 7.51 m
• Overall Length 11850.0 mm
• Trailer 3302.0 mm
• Trailer Frame Height – with 35" Tires 914.0 mm
• Trailer Height – with 35" Tires at Top of False Bottom 954.0 mm
• Width – Extended Deck 3395.0 mm

Drive Train

• Design 1 Two proprietary design
• Design 2 Double-reduction parallel primary reducers equipped with integral multiple wet disc brakes and axle shaft
• Design 3 Mounted to a proprietary design planetary wheel end

General Data

• Payload Capacity 9.0 tonnes
• Power Type Battery

Hydraulics

• Battery Changer Cylinder Two (2) double-acting cylinders with 63.5 mm (2.5 in) shock-absorption relief system.
• Pump 1 Main hydraulic system, gear type pump directly splined to pump motor at 16 054 kPa (2,300 psi)
• Pump 2 Monitored by a glycerin-filled main system pressure gauge
• Pump Motor 1 Alternating current motor: MSHA totally enclosed, explosion-proof, non-ventilated cooling, and foot-mounted
• Pump Motor 2 Mine duty laminated frame
• Steering Cylinder Two (2) double-acting cylinders with 63.5 mm (2.5 in) forged rods. Equipped with integrated shock-absorption relief system.
• Valve Banks 1 Five-section parallel type equipped with glycerin-filled pressure-monitoring gauge
• Valve Banks 2 Functions: • Eject/Retract • Vertical Articulation (Terrain Compensation) • Battery Lift (Changer) • P.T.O. • Steering

Turning Radius

• Discharge Time 24 seconds
• Steering Articulation 120 degrees total
• Terrain Compensation Articulation (+) 15 degree/(–) 10 degree
• Tram Speed (Speed will vary depending on floor conditions) 0-8.04 km/h (0-5 mph)

FRAME

• Type Heavy-duty, with bends utilized where applicable to reduce the number of indeterminate stresses introduced by welding.

WHEELBASE

• Empty Weights – With 64-SS100-25 Battery 31524.0 kg
• Empty Weights – With 64-SS85-25 Battery 30844.0 kg
• Empty Weights – Without Battery 23995.0 kg

DESIGN GROSS VEHICLE WEIGHT

• Cubic Feet Capacity: (Maximum Payload – Calculated) – Heaped with No Sideboards 12.34 m3
• Cubic Feet Capacity: (Maximum Payload – Calculated) – Struck Capacity 6.25 m3

HYDRAULICS AND CONTROLS

• Components 1 Battery tuned battery-lift shock absorption for ride comfort
• Components 2 Open Loop with gear pump hydraulic system
• Components 3 Hydraulic component design and placement for ease of service and/or maintenance and fewer hydraulic components and hoses
• Components 4 Battery lift load-locking counterbalance valves for safety

ELECTRIC DRIVE TRAIN

• Components 1 Operator interface diagnostic and information display
• Components 2 Variable-frequency traction drive
• Components 3 Lead acid battery DC power source
• Components 4 36 kW (48 hp) inverter duty AC inductance pump motor
• Components 5 Control system with operator interface accelerator and operator interface control handle
• Components 6 56 kW (75 hp) AC inductance traction motor

CENTER SECTION

• Type Heavy-duty, dual-articulation joint, welded steel construction with steel pivot pins
• Type 1 Axial load rating of 261 269 kg (576,000 lb)
• Type 2 Horizontal self-aligning pivot thrust bearings on the articulation and ball bearing on secondary articulation

BATTERY CHANGER

• Type 1 Ground Level Battery Changer System
• Type 2 No battery stands are required.
• Type 3 Hydraulically operated integral system that includes 2 independent battery lift arms that work simultaneously during operation.

OPERATOR’S COMPARTMENT

• Features 1 Manual breaker lever reset
• Features 10 Full height back and head protection
• Features 11 Heavy-duty, adjustable, ergonomically designed operator’s seat
• Features 12 Ergonomically designed control stick, for one-hand control of face hauler
• Features 13 Right-foot-operated accelerator switch pedal
• Features 14 Dual panic tape switches that de-energize electrical system and apply automatic brake
• Features 15 Warning gong
• Features 2 Left-handed mechanical steering handle
• Features 3 Right-hand vertical articulation handle (terrain compensation)
• Features 4 Right hand battery changer handle
• Features 5 Right-hand battery lock/unlock handle
• Features 6 Right-handle battery float handle (independently located separate from valve bank)
• Features 7 Left-foot brake pedal
• Features 8 Easily visible glycerin-filled gauges
• Features 9 Side egress, access

HANDLE MANUALS

• Types 1 One Linkone CD, which includes all above manuals in electronic format
• Types 2 Two parts manuals
• Types 3 Two battery maintenance charts
• Types 4 Two electrical troubleshooting guides
• Types 5 Two battery maintenance manuals
• Types 6 Two operation and preventive maintenance manuals