Hyundai Equipment R340LC-7 Base

Specifications of Hyundai Equipment R340LC-7 Base

Engine

• Engine Model Hyundai D6AC - C
• Gross Power 276 HP (202 kW) @ 1900 rpm
• Max Torque 1177 Nm (868 lbf.ft) @ 1400 rpm
• Piston displacement . 11149 cc
• Power – Net 260 HP (191 kW) @ 1900 rpm
• Type W ater cooled, 4 cycle diesel, 6 cylinder in line , direct injection turbocharged, charge air cooled and Low emission

Weights

• Bucket capacity 2.1 m³ GP , 1.62 m³ 1.44 m² HD , RB SAE Heaped
• Operating Weight 33740 kg

Dimensions

• Ground clearance, counterweight 1200
• Minimum ground clearance 500
• Overall height of cabin 3090
• Overall Length 11310
• Overall Length crawler 4940
• Overall Width 3280
• overall width of uperstructure 2980
• Rear end length 3400
• Tail swing radius 3460
• Track Gauge 2680
• Track Shoe Width 600
• Tumbler distance (mm) 4030

Hydraulic System

• Maximum flow. 2 x 269 lpm
• Pump Type Two variable displacement piston pump
• Relief Valve impliment circuit 330 kgf/cm²
• Relief Valve travel 330 kgf/cm²

Brakes

• Drive method Fully hydrostatic type
• Drive motor Axial piston motor in-shoe design
• Parking brakes Multi wet disc

Undercarriage

• Center Frame X-leg type
• No. of carrier rollers each side 2
• No. of rail guards on each side 2
• No. of shoe each side 48
• No. of track rollers 9
• Track frame pentagonal box type

SWING SYSTEM

• Swing bearing lubrication Grease bathed
• Swing brake Multi wet disc
• Swing motor Axial piston motor
• Swing reduction Planetary gear reduction
• Swing speed 9.5 rpm

WORKING RANGE

• Max. digging depth 6305
• Max. digging height 9830
• Max. digging reach 10210
• Max. digging reach at ground level 10010
• Max. dumping height 6840
• Max. vertical wall digging depth 5110
• Min. swing radius 4840