Standard HMC-20000 BASE

Specifications of Standard HMC-20000 BASE

Operating Specifications

• Lifting Capacity 20 Tonnes

Specifications

• Unladen Weight 12645 KG.(Approx.)

Hydraulic System

• Electrical System 12 V ,Negtive earth ,single battery
• Transmission “Sliding Mesh , Spur Teeth With 10 forward, 2 Reverse Speed & hi-low Range Selector”

Axles

• Brakes “Pneumatically assisted hydraulic brakes Front & Rear Brakes Are actuated through a single pedal”
• Clutch “Single Plate ,Heavy Duty & Dry Friction With Spring Loaded Pressure Plate”

Hydraulic Controls

• Steering “Hydraulic operated with 55 articulation on either side and turning radius of 5.5 m (approx.) on outer rear wheels”

GENERAL SPECIFICATIONS

• MAIN FRAME Extra heavy in single radius

Speed

• Max Speeds 28 KMPH

Boom Performance

• FRONT 12.00 X 20 -16 PR (OPT.) (FOUR NOS.)
• HOIST “Which rope dia 13 mm driven by hydraulic motor with 4 falls”
• HOIST SPEED 24 Mtrs. /Min.(Line Speed)
• RANGE 0 TO 65 (degree)
• REAR 16.00 X 28 PR (STD.) /
• TIME 23 SECOND

Optional Engine

• Engine Model “SE-450 Standard , 4 Cylinder, Direct Injection , Water Cooled Diesel Engine”

BOOM

• Derricking Through two double acting jacks with rod dia 63 mm
• MAX. BOOM HEIGHT 57′-6 With single extension
• TELESCOPING BOOM “Three part heavy duty boom with hydraulic operated single extension of 1800 mm stroke”
• TELESCOPING TIME 45 Seconds

Fuel Tank

• Engine 13.5
• Fuel Tank Capacity 45
• Hydraulic Oil Tank Capacity 160
• SAFETY “Audio overloaded indication hose failure protection safety valve on lift cylinder boom pin failure protection tie bolt pin failure protection”
• STANDARD EQUIPMENT “All weather cabin lift cylinder guard turn & reverse lamp front bumper reflector rear view mirror”
• TRANSMISSION 47