Loading.. Please wait
Welcome : User

Caterpillar 988H Large Wheel Loaders

Caterpillar-988H
Price not available Get Best Price

Since 1963, the Cat® 988 Wheel Loader has helped more customers than any other manufacturer's model in this wheel loader size class. Today, we continue that legacy with the 988H update. We know times are tough...the economy is challenging...but the 988H update is our commitment to bringing you, our customers, the absolute best value. With the 988H update, Caterpillar continues the tradition of incorporating customer driven enhancements that increase productivity and lower fuel consumption, improves reliability of key systems and components and improves safety and ergonomics for your operators.

Specifications of Caterpillar 988H Large Wheel Loaders

Caterpillar 988H Large Wheel Loaders Specifications

Engine

  • Bore 145.0 mm
  • Displacement 18.1 L
  • Engine Model Cat® C18 ACERT®
  • Gross Power 414.0 kW
  • Gross Power – ISO 3046-2 388.0 kW
  • Net Power 373.0 kW
  • Net Power – EEC 80/1269 373.0 kW
  • Net Power – ISO 9249 373.0 kW
  • Net Power ISO 14396 397.0 kW
  • Stroke 183.0 mm

Transmission

  • Converter Drive – Forward 1 6.7 km/h
  • Converter Drive – Forward 2 11.8 km/h
  • Converter Drive – Forward 3 20.8 km/h
  • Converter Drive – Forward 4 36.0 km/h
  • Converter Drive – Reverse 1 7.6 km/h
  • Converter Drive – Reverse 2 13.5 km/h
  • Direct Drive – Forward 1 Lock-up disables
  • Direct Drive – Forward 2 12.3 km/h
  • Direct Drive – Forward 3 21.9 km/h
  • Direct Drive – Forward 4 38.6 km/h
  • Direct Drive – Reverse 1 7.9 km/h
  • Direct Drive – Reverse 2 14.1 km/h
  • Direct Drive – Reverse 3 25.1 km/h

Service Refill Capacities

  • Cooling System 103.0 L
  • Crankcase 60.0 L
  • Differentials and Final Drives – Front 186.0 L
  • Differentials and Final Drives – Rear 186.0 L
  • Fuel Tank 712.0 L
  • Hydraulic System (factory fill) 470.0 L
  • Hydraulic System (tank only) 267.0 L
  • Transmission 70.0 L

Steering

  • Steering Meets SAE and ISO standards
  • Total Steering Angle 86.0 Degrees

Operating Specifications

  • Operating Weight 50144.0 kg
  • Rated Payload 11.4 tonnes

Dimensions

  • B-Pin Height 5853.0 mm
  • Bucket Capacities 6.4 m3-7.7 m3 8.3 yd3-10 yd3
  • Center Line of Front Axle to Hitch 2275.0 mm
  • Center Line of Rear Axle to Edge of Rear Bumper 3132.0 mm
  • Clearance at Maximum Lift/Dump 3879.0 mm
  • C-Pin Height 1009.0 mm
  • Dig Depth 226.0 mm
  • Ground Clearance 549.0 mm
  • Height to Spillguard 5432.0 mm
  • Height to Top of Air Cleaner 3382.0 mm
  • Height to Top of Cab 4128.0 mm
  • Height to Top of Exhaust Stacks 4112.0 mm
  • Height to Top of Hood 3156.0 mm
  • Max. Bucket Capacity 7.7 m3
  • Rack Back Angle at Carry 56.5 Degrees
  • Rack Back Angle at Ground 47.8 Degrees
  • Rack Back Angle at Maximum Lift 45.0 Degrees
  • Wheel Base Length 4550.0 mm

Axles

  • Front Fixed
  • Maximum Single-Wheel Rise and Fall 568.0 mm
  • Rear Oscillating ±13°

Brakes

  • Brakes Meet SAE ISO 3450:1996

Cab

  • Cab – ROPS/FOPS Meets SAE and ISO standards
  • Sound Performance Meets ANSI, SAE and ISO standards

Loader Hydraulic System

  • Cylinder, Double Acting: Tilt, Bore and Stroke 220 × 911 mm 8.7 × 35.9 in
  • Cylinders, Double Acting: Lift, Bore and Stroke 220 × 1770 mm 8.7 × 69.7
  • Main Hydraulic System Output at 2010 rpm and 6900 kPa (1000 psi) 492.0 L/min
  • Pilot System, Gear-Type Pump Output at 2010 rpm and 2500 kPa (363 psi) 76.0 L/min
  • Relief Valve Setting 35000.0 kPa
  • Relief Valve Setting (low idle) 2400.0 kPa

Hydraulic Cycle Time

  • Dump 2.4 Seconds
  • Lower Float Down (Empty) 3.8 Seconds
  • Raise 9.4 Seconds
  • Total Hydraulic Cycle Time 15.6 Seconds

You can help other customers

Have you used this car?

Write A Review