Caterpillar CL210B Load Haul Dumps

Specifications of Caterpillar CL210B Load Haul Dumps

Weights

• Laden with Forks and 10T Load 29000.0 kg
• Unladen with Full Tanks and Bucket 19000.0 kg

Transmission

• Speeds, Forward and Reverse 4
• Type Power Shift with Forward/Reverse

Specifications

• Height 1864 mm (73.4 in)
• Load Capacity 10 tonnes (11.02 tons)
• Power Type Diesel, Turbocharged

Tires

• Inflation Media Air
• Inflation Pressure 800.0 kPa
• Ply Rating Radial
• Size 17.5 × R25
• Type XKA Tires

Dimensions (Approximate)

• Height – Ground Clearance 370.0 mm
• Height – Top of Covers 1550.0 mm
• Height – Top of ROPS: HIGH Canopy Mount 1990.0 mm
• Height – Top of ROPS: LOW Canopy Mount 1864.0 mm
• Height – Top of ROPS: MID Canopy Mount 1927.0 mm
• Inner Turn Radius 3110.0 mm
• Length – Overall with Bucket 9620.0 mm
• Length – Overall with Fork 9650.0 mm
• Length – Rear Axle to Bumper 2770.0 mm
• Length – Wheel Base 3360.0 mm
• Lift Height – Bucket Raised 3730.0 mm
• Lift Height – Fork Frame 3700.0 mm
• Lift Height of Fork 2490.0 mm
• Outer Turn Radius Frame 5901.0 mm
• Turn Radius Bucket 6305.0 mm
• Width 2340.0 mm
• Width – Overall 2500.0 mm

Wheels

• Make/Model 5 Pieces (Heavy Duty)

ELECTRICAL SYSTEM

• Polarity Floating Chassis
• Type Approved Flameproof
• Voltage 12.0 volts

CAPACITIES

• Bucket Payload 8000.0 kg
• Maximum Braked Trailer Mass Consult Caterpillar
• Maximum Un-braked Trailer Mass 10000.0 kg
• RAS Belt/Cable Reeler, Maximum Payload 7000.0 kg
• RAS Forks, Maximum Payload 600 mm (23.6 in) Load from Fork Face 10000.0 kg
• RAS Slewing Jib, Maximum Payload 7000.0 kg

ENGINE SPEEDS

• High Idle 2300.0 RPM
• Low Idle 800.0 RPM

FUEL CONSUMPTION

• At Full Power 39.4 L/ hr
• Average Mine Duty 20-40 L/hr (5.3-10.6 gal/hr)

START SYSTEM

• Starter Motor Type Air Turbine Type

INTAKE AIR CLEANER

• Intake Flame Trap Spiral Wound Type
• Type/Make Dry Dual Element/Caterpillar

EXHAUST CONDITIONER

• Aftertreatment Catalytic Exhaust Purifier
• Exhaust Filter Replaceable Element Except China
• Exhaust Flame Trap Replaceable China and RSA
• Make Caterpillar
• Type Flameproof Wet

ARTICULATION

• Degrees of Turn Either Side 43 Degree

OSCILLATION

• Degrees Up and Down from Horizontal 7.5 Degree

SEATING (DRIVER)

• Type Cross-seated

CANOPY

• Type Protective Device ROPS/FOPS

LIGHTS

• Number/Location 2 Front, 2 Rear; Approved Flameproof

ALTERNATOR

• Drive Hydraulic
• Type Approved Flameproof

PNEUMATIC SYSTEM

• Air Flow 0.340 m3/min (1.2 ft3/min) @ 1,500 rpm
• Air Receiver Volume 150.0 L
• Compressor Type Piston Engine Gear Driven
• Governed Pressure 800.0 kPa
• Relief Pressure 830.0 kPa

SERVICE CAPACITIES

• Axle Oil (Each) 60.0 L
• Engine Cooling System Water 72.0 L
• Engine Crankcase Oil (with Filter) 25.0 L
• Fuel Tank 200.0 L
• Hydraulic Tank 250.0 L
• Main Air Receiver 150.0 L
• Transmission/Converter Oil 40.0 L
• Water Make Up Tank 450.0 L

GRADE ABILITY

• Front to Rear 1:4
• Side to Side (Empty) 1:4
• Side to Side (Loaded) 1: 8

STANDARD EJECTOR BUCKET

• Heaped Capacity (SAE) 3.5 m3
• Struck Capacity 2.7 m3

HYDRAULIC FILTRATION

• Bucket System Return 10 Micron Replaceable with Bypass
• Steer/Brake System Pressure 10 Micron Replaceable with Bypass

ENGINE (6 CYLINDER)

• Cooling Fan Hydraulic Driven Fan
• Cooling System Coolant Based Radiator
• Displacement 7.2 L
• Engine Make/Model Cat® C7
• Maximum Power Gross 171.5 kW (230 hp) @ 2,200 rpm
• Maximum Torque Tested 895 N·m (660 lb-ft) @ 1,700 rpm
• Radiator Position Vertical Rear
• Type Diesel, Turbocharged

VEHICLE SPEEDS

• 1st Gear 2.9 km/ h
• 2nd Gear 6.1 km/h
• 3rd Gear 10.5 km/h
• 4th Gear 18.1 km/ h

AXLES STANDARD

• Front Axle Fixed
• Rear Axle Bolster Mount
• Type 1 Bevel Gear and Pinion
• Type 2 Outboard Planetary

SHUTDOWN SYSTEM

• Optional Shutdowns High Methane; Low Hydraulic Oil; Exhaust Scrubber Temperature
• Standard Shutdowns Low Engine Oil Pressure; Exhaust Temperature; Engine Coolant Level; Engine Coolant Temperature; Turbo Temperature
• Standard Shutdowns (cont'd.) Scrubber Level 1; Scrubber Level 2
• System Type DCS Electronic; Intrinsically Safe Approved