BEML BD155 Base

Specifications of BEML BD155 Base

Engine

• Bore & stroke 170 x 170 mm
• Displacement 23.15 l (0.02315m³ )
• Engine Make BEML BS6D170-1 6 inline, Diesel 4 stroke, water cooled, turbo charged, direct injection
• Flywheel Power 242 kW (324 HP) @ 2000 rpm
• Maximum Torque 1456N-m (148.5 kg-m) at 1400 rpm
• No. of cylinders 6, inline

Transmission

• Final Drive Spur gear , Double reduction
• Forward 1 0-1.03 (0-3.70)
• Forward 2 0-1.89 (0-6.80)
• Forward 3 0-3.28 (0-1 1.8)
• Reverse 1 0-1.25 (0-4.50)
• Reverse 2 0-2.30 (0-8.20)
• Reverse 3 0.3.81 (0-13.7)
• Transmission Type 3F/3R,Planetary Powershift T ransmission

Hydraulic System

• Blade Tilt 1 Cylinder
• Blade Lift 2Cylinder
• Bore x Stroke (mm) 140 mm x 1346 mm
• Hydraulic cylinders Type Double acting piston type
• Hydraulic pump Gear pump
• Pump Capacity 335 /pm
• Relief pressure 13.73 MPa (140 kg/cm²)

Brakes

• Control Foot operated Mechanical linkage assisted by hydraulic booster for light touch and easy actuation. Brakes and steering clutches are hydraulically interconnected for easy steering.
• Parking Brake Hand Operated with mechanical linkages. Draw
• Type wet, Contracting Band

Undercarriage

• Ground Pressure 79.46 kPa (0.81 kg/cm²)
• No. of carrier rollers 2 no. each side
• Suspension Semi rigid Equalizer bar type
• Track frame Box section ,high tensilsteel construction.
• Track pitch 2140 mm
• Track Rollers/Side 7 no. each side
• Track Shoe Width 560 mm
• Track Shoes 41 no. each side

Electrical

• Alternator 24V , 100A / 140A
• Battery 2 x 12V , 200Ah / 160 Ah
• Starting motor 24V , 9.0kW

STEERING SYSTEM

• Type Wet, multiple disc hydraulically actuated and require no adjustment.