BEML BD30W-1 Base

Specifications of BEML BD30W-1 Base

Engine

• Air Cleaner Dry type
• Aspiration Turbocharged
• Bore & stroke 140 x 165 mm
• Compression ratio 15.0:1
• Engine Make BEML
• Engine Model BS6D140-1
• Governor Mechanical
• Lubrication system Forced lubrication, gear pump
• Maximum Torque 1247.8 Nm (127.2 kgm) @ 1500 rpm
• Net Power 224 kW (300 fhp) @2100 rpm
• No. of cylinders 6
• Piston displacement . 15.24 l
• Type Diesel, 4 cycle, Water cooled, Direct injection

Transmission

• Forward 1 6.67
• Forward 2 12.9
• Forward 3 24.75
• Reverse 1 6.4
• Reverse 2 12.57
• Reverse 3 23.72
• Type Pressure line filter

Steering

• Relief pressure 17.2 MPa (175 kg / cm²)
• Steering Center pivot frame articulation
• Steering angle Wide articulation of 30° on each side
• Steering pump Gear pump
• Turning radius 9400 mm (outer tip blade)
• Type Center pivot frame articulation

Hydraulic System

• Bore x Stroke (mm) 140 x 990 mm
• Lift Cylinder Two, Double acting type
• Main pumps Gear Pump
• Pump Capacity 410 l / min @ 2100 rpm
• Relief pressure 13.73 MPa (140 kg/cm²)
• Tilt One, Double acting type

Brakes

• Emergency brake Automatically actuates the parking brake when the air pressure goes below the rated value
• Parking Dry disc type applied on intermediate drive shaft
• Service 4 wheel , enclo sed, air over hydra ulica lly actuated, outboard mounted, wet multiple disc brakes, independent front & rear brakes.

Electrical

• Alternator 24 V / 100 A
• Battery 2 x 12 V / 200 Ahz
• Starting motor 24 V / 7.5 kW

SERVICE CAPACITIES

• Cooling System 80
• Engine oil pan 32
• Front Axle 59
• Fuel Tank 445
• Hydraulic system 181
• Rear Axle 59
• Transmission & torque converter 62