BEML BH150E Base

Specifications of BEML BH150E Base

Engine

• Bore & stroke 159 x 159 mm
• Displacement 50.3 l
• Engine Make CUMMINS
• Engine Model QSK50C - EPA Tier II Compliant
• Flywheel Power 1398 kW(1875 hp) @1900RPM
• Maximum Torque 7871 Nm @ 1500 RPM
• No. of cylinders 16, V-Configuration
• Type IC-diesel, 4 stroke, Turbocharged, Charge air Cooled, Direct injection, Electronic engine

Service Refill Capacities

• Cooling Systems 560
• Fuel Tank 3250
• Hydraulic Tank 600

Hydraulic System

• Hydraulic pump Tandem Pump - VANE type

Tires

• Rim size 24'' x 51'' (26'' x 51'' OPTIONAL)
• Size (Front & Rear) 33.00 R51 Radial tyre 36.00 R51 Radial tyre - OPTIONAL

Brakes

• Emergency brake Automatically applied when accumulator pressure drops below specified value
• Parking brakes Spring applied Hydraulic released
• Retarder Electro Dynamic Retarding with Grid Cooling Meets SAE / ISO 3450 performance requirements.
• Service brakes Front All hydraulic actuated Single Disc, 3-calipers.
• Service brakes Rear Dual disc, 1 caliper / disc.

Electrical

• Alternator 24 V DC, 260A
• Battery 4 x 12 V, 75 Ah in series and parallel (Deep Cycles)
• Starting motor 24 V DC, 11kW (2 Nos)

STEERING SYSTEM

• Bore x Stroke 127 x 650 mm
• Cylinder type Double acting, piston type
• Minimum turning radius 13.35 mts
• Quantity Two
• Relief pressure 210 Bar
• Type Twin cylinder with Accumulator assisted Emergency steering

Suspension

• Type - Front Frame mounted, Hydro-Pneumatic, integral rebound control.
• Type - Rear Axle mounted, Hydro-Pneumatic, integral rebound control