Caterpillar-140K

Price not available

Caterpillar 140K K Series Motor Graders

Variants

Specifications of Caterpillar 140K K Series Motor Graders

Engine

  • Base Power (1st gear) – Net 128.0 kW
  • Base Power (1st gear) – Net (Metric) 128.0 kW
  • Bore 105.0 mm
  • Derating Altitude 3048.0 m
  • Displacement 7.2 L
  • Engine Model Cat® C7 ACERT™
  • Fan Speed Maximum 1925.0 RPM
  • High Ambient Capability 50.0 ° C
  • Maximum Torque Net 996.0 N · m
  • Number of Cylinders 6
  • Speed @ rated power 2000.0 RPM
  • Stroke 127.0 mm
  • Torque Rise 46.0 %
  • VHP – gear 3 Gross 147.0 kW
  • VHP – gear 3 Net 135.0 kW
  • VHP – gears 1-2 Gross 140.0 kW
  • VHP – gears 1-2 Net 128.0 kW
  • VHP – gears 4-8 Gross 155.0 kW
  • VHP – gears 4-8 Net 143.0 kW
  • VHP Range – Net 128-143 kW (171-191 hp)

Weights

  • Gross Vehicle Weight – Typically Equipped 17510.0 kg
  • Gross Vehicle Weight: Base – front axle 4172.0 kg
  • Gross Vehicle Weight: Base – rear axle 10120.0 kg
  • Gross Vehicle Weight: Base – total 14292.0 kg
  • Gross Vehicle Weight: Maximum – front axle 8005.0 kg
  • Gross Vehicle Weight: Maximum – rear axle 14866.0 kg
  • Gross Vehicle Weight: Maximum – total 22870.0 kg
  • Gross Vehicle Weight: Typically Equipped – front axle 5053.0 kg
  • Gross Vehicle Weight: Typically Equipped – rear axle 12457.0 kg
  • Gross Vehicle Weight: Typically Equipped – total 17510.0 kg

Service Refill Capacities

  • Circle drive housing 7.0 L
  • Cooling System 40.0 L
  • Engine Oil 18.0 L
  • Front wheel spindle bearing housing 0.5 L
  • Fuel Capacity 305.0 L
  • Tandem housing (each) 64.0 L
  • Transmission/Differential/Final Drives 60.0 L

Standards

  • Brakes ISO 3450:1996
  • ROPS/FOPS ISO 3471:1994/ISO 3449:2005
  • Sound ISO 6394:2008/ISO 6396:2008
  • Steering ISO 5010:2007

Operating Specifications

  • Articulation Angle – left/right 20.0 Degrees
  • Forward – 1st 4.1 km/h
  • Forward – 2nd 5.5 km/h
  • Forward – 3rd 8.0 km/h
  • Forward – 4th 11.0 km/h
  • Forward – 5th 17.4 km/h
  • Forward – 6th 23.6 km/h
  • Forward – 7th 32.5 km/h
  • Forward – 8th 47.3 km/h
  • Reverse – 1st 3.2 km/h
  • Reverse – 2nd 6.0 km/h
  • Reverse – 3rd 8.7 km/h
  • Reverse – 4th 13.7 km/h
  • Reverse – 5th 25.7 km/ h
  • Reverse – 6th 37.4 km/h
  • Steering Range – left/right 47.5 Degrees
  • Top Speed – forward 47.3 km/h
  • Top Speed – reverse 37.4 km/h
  • Turning Radius, outside front tires 7.5 m

Dimensions

  • Ground Clearance – Center Front Axle 626.0 mm
  • Ground Clearance, Trans. Case 362.0 mm
  • Height – Non-ROPS Cab 3348.0 mm
  • Height – ROPS Cab 3354.0 mm
  • Height – ROPS Canopy 3354.0 mm
  • Height – Top of Cylinders 3049.0 mm
  • Height to Exhaust Stack 2895.0 mm
  • Length – Between Tandem Axles 1523.0 mm
  • Length – Counterweight to Ripper 10013.0 mm
  • Length – Front Axle to Mid Tandem 6086.0 mm
  • Length – Front Axle to Moldboard 2598.0 mm
  • Length – Front Tire to Rear of Machine 8504.0 mm
  • Width – Outside Front Tires 2481.0 mm
  • Width – Outside Rear Tires 2452.0 mm
  • Width – Tire Center Lines 2065.0 mm

Hydraulic System

  • Circuit Type Load Sensing, Closed Center, Proportional Priority Pressure Compensating System
  • Maximum System Pressure 25500.0 kPa
  • Optional High Output Pump 210.5 L/min
  • Pump Output Standard Pump 159.1 L/min
  • Pump Type Variable Piston
  • Reservoir Tank Capacity 55.0 L
  • Standby Pressure 3600.0 kPa

Power Train

  • Brakes – Parking Air actuated, multiple oil-disc
  • Brakes – Secondary Dual circuit
  • Brakes – Service Air actuated, multiple oil-disc
  • Brakes – Service, surface area 23948.0 cm2
  • Forward/Reverse Gears 8 forward/6 reverse
  • Transmission Direct drive, Power shift

Ripper

  • Machine length increase, beam raised 970.0 mm
  • Penetration force 8694.0 kg
  • Pryout Force 11673.0 kg
  • Ripper shank holder spacing 533.0 mm
  • Ripper shank holders, quantity 9
  • Ripping depth – maximum 462.0 mm
  • Scarifier shank holder quantity 5

FRAME

  • Circle – blade beam thickness 35.0 mm
  • Circle – diameter 1530.0 mm
  • Drawbar – height 127.0 mm
  • Drawbar – width 76.2 mm
  • Front axle – height to center 628.0 mm
  • Front axle – total oscillation 32.0 Degrees
  • Front axle – wheel lean, left/right 18.0 Degrees
  • Front-linear weights – maximum 213.0 kg/m
  • Front-linear weights – minimum 165.0 kg/m
  • Front-section modulus – maximum 4785.0 cm3
  • Front-section modulus – minimum 2083.0 cm3
  • Front-side plates – thickness 12.0 mm
  • Front-side plates – width 242.0 mm
  • Front-top/bottom plate – thickness 25.0 mm
  • Front-top/bottom plate – width 305.0 mm

MOLDBOARD

  • Arc Radius 413.0 mm
  • Blade Pull – base GVW 9108.0 kg
  • Blade Pull – maximum GVW 13379.0 kg
  • Blade Width 3.7 m
  • Cutting Edge – thickness 16.0 mm
  • Cutting Edge – width 152.0 mm
  • Down Pressure – base GVW 7278.0 kg
  • Down Pressure – maximum GVW 13963.0 kg
  • End Bit – thickness 16.0 mm
  • End Bit – width 152.0 mm
  • Moldboard – height 610.0 mm
  • Moldboard – thickness 22.0 mm
  • Throat Clearance 120.0 mm

BLADE RANGE

  • Blade Tip Range – backward 5.0 Degrees
  • Blade Tip Range – forward 90.0 Degrees
  • Circle Centershift – left 752.0 mm
  • Circle Centershift – right 728.0 mm
  • Maximum Blade Position Angle 90.0 Degrees
  • Maximum depth of cut 735.0 mm
  • Maximum lift above ground 480.0 mm
  • Maximum shoulder reach outside of tires – left 1896.0 mm
  • Maximum shoulder reach outside of tires – right 1978.0 mm
  • Moldboard Sideshift – left 512.0 mm
  • Moldboard Sideshift – right 663.0 mm

SCARIFIER

  • Mid, V-Type: Scarifier shank holder spacing 116.0 mm
  • Mid, V-Type: Scarifier shank holders quantity 11
  • Mid, V-Type: Scarifying depth, maximum 229.0 mm
  • Mid, V-Type: Working width 1184. 0 mm
  • Rear: Scarifier shank holder spacing 267.0 mm
  • Rear: Scarifier shank holders quantity 9
  • Rear: Scarifying depth, maximum 266.0 mm
  • Rear: Working width 2300.0 mm

TANDEMS

  • Drive chain pitch 51.0 mm
  • Height 506.0 mm
  • Sidewall thickness – inner 16.0 mm
  • Sidewall thickness – outer 18.0 mm
  • Tandem oscillation – front down 25.0 Degrees
  • Tandem oscillation – front up 15.0 Degrees
  • Wheel axle spacing 1522.0 mm
  • Width 201.0 mm

WEIGHTS – TYPICALLY EQUIPPED

  • Gross Vehicle Weight 17510.0 kg
  • Operating Weight – Typically Equipped 15108.0 kg

GROSS VEHICLE WEIGHT – MAXIMUM

  • Gross Vehicle Weight 22870.0 kg

You can help other customers

Have you used this car?

Write A Review

Caterpillar 140K K Series Motor Graders Pictures

Select Equipment Dealers by Brand and City