Caterpillar 16M M Series Motor Graders

Specifications of Caterpillar 16M M Series Motor Graders

Engine

• Base Power (1st gear) – Net 221.0 kW
• Base Power (1st gear) – Net (Metric) 221.0 kW
• Base Power (all gears) – Net 221.0 kW
• Bore 130.0 mm
• Derating Altitude 4572.0 m
• Displacement 12.5 L
• Engine Model Cat® C13 ACERT™ VHP
• High Ambient – Fan Speed – Maximum 1,450 rpm
• High Ambient – Fan Speed – Minimum 550 rpm
• High Ambient Capability 50.0 ° C
• Maximum Torque 1712.0 N·m
• Number of Cylinders 6
• Speed @ rated power 2,000 rpm
• Standard – Ambient Capability 43.0 ° C
• Standard – Fan Speed – Maximum 1,200 rpm
• Standard – Fan Speed – Minimum 550 rpm
• Stroke 157.0 mm
• Torque Rise 46%
• VHP Plus Range – Net 221-248 kW (297-332 hp)
• VHP Plus Range – Net (Metric) 221-248 kW (301-337 hp)
• VHP Range – Net 221-233 kW (297-312 hp)
• VHP Range – Net (Metric) 221-233 kW (301-316 hp)

Weights

• Gross Vehicle Weight – Base – Front Axle 7413.0 kg
• Gross Vehicle Weight – Base – Rear Axle 20118.0 kg
• Gross Vehicle Weight – Base – Total 27531.0 kg
• Gross Vehicle Weight – Maximum – Front Axle 11500.0 kg
• Gross Vehicle Weight – Maximum – Rear Axle 26050.0 kg
• Gross Vehicle Weight – Maximum – Total 37550.0 kg
• Gross Vehicle Weight – Typically Equipped 30544.0 kg
• Gross Vehicle Weight – Typically Equipped – Front Axle 7728.0 kg
• Gross Vehicle Weight – Typically Equipped – Rear Axle 22816.0 kg
• Gross Vehicle Weight – Typically Equipped – Total 30544.0 kg
• Operating Weight – Typically Equipped 30544.0 kg

Service Refill Capacities

• Circle drive housing 8.0 L
• Cooling System 60.4 L
• Engine Oil 30.0 L
• Front wheel spindle bearing housing 0.9 L
• Fuel Capacity 534.0 L
• Hydraulic System – Tank 65.0 L
• Hydraulic System – Total 114.0 L
• Tandem housing (each) 121.5 L
• Transmission/Differential/Final Drives 114.0 L

Standards

• Brakes ISO 3450
• ROPS/FOPS ISO 3471/ ISO 3499
• Sound ISO 6394/ISO 6395
• Steering ISO 5010:2007

Operating Specifications

• Articulation Angle – left/right 20°
• Forward – 1st 4.5 km/ h
• Forward – 2nd 6.1 km/h
• Forward – 3rd 8.9 km/h
• Forward – 4th 12.3 km/h
• Forward – 5th 19.0 km/h
• Forward – 6th 25.7 km/h
• Forward – 7th 35.5 km/h
• Forward – 8th 51.7 km/h
• Reverse – 1st 3.6 km/h
• Reverse – 2nd 6.6 km/h
• Reverse – 3rd 9.7 km/h
• Reverse – 4th 15.0 km/h
• Reverse – 5th 28.0 km/h
• Reverse – 6th 40.8 km/h
• Steering Range – left/right 47.5°
• Top Speed – forward 51.7 km/h
• Top Speed – reverse 40.8 km/h
• Turning Radius, outside front tires 8.9 m

Hydraulic System

• Circuit Type Electro-hydraulic load sensing, closed center
• Maximum System Pressure 24150.0 kPa
• Pump Output 280.0 L/min
• Pump Type Variable piston
• Standby Pressure 3100.0 kPa

Power Train

• Brakes – Parking Spring applied, hydraulically released
• Brakes – Secondary Oil-actuated, oil -disc
• Brakes – Service Oil-actuated, oil-disc
• Brakes – Service, surface area 49830.0 cm2
• Forward/Reverse Gears 8 Forward/6 Reverse
• Transmission Direct drive, power shift, countershaft

Ripper

• Machine length increase, beam raised 1610.0 mm
• Penetration force 11830.0 kg
• Pryout Force 17467.0 kg
• Ripper shank holders, quantity 7
• Ripping depth – maximum 452.0 mm
• Shank Holder Spacing – Maximum 500.0 mm
• Shank Holder Spacing – Minimum 445.0 mm

FRAME

• Circle – blade beam thickness 50.0 mm
• Circle – diameter 1822.0 mm
• Drawbar – height 203.0 mm
• Drawbar – width 76.0 mm
• Front axle – height to center 688.0 mm
• Front axle – total oscillation per side 32.0°
• Front axle – wheel lean, left/right 18.2°
• Front Frame Structure – Height 356.0 mm
• Front Frame Structure – Thickness 14.0 mm
• Front Frame Structure – Width 324.0 mm

MOLDBOARD

• Arc Radius 413.0 mm
• Blade Pull – base GVW 17591.0 kg
• Blade Pull – maximum GVW 22024.0 kg
• Blade Width 4.9 m
• Cutting Edge – thickness 25.0 mm
• Cutting Edge – width 203.0 mm
• Down Pressure – base GVW 13224.0 kg
• Down Pressure – maximum GVW 19979.0 kg
• End Bit – thickness 19.0 mm
• End Bit – width 152.0 mm
• Height 787.0 mm
• Thickness 25.0 mm
• Throat Clearance 126.0 mm
• Width 4.9 m

BLADE RANGE

• Blade Tip Range – backward 5°
• Blade Tip Range – forward 40°
• Circle Centershift – left 647.0 mm
• Circle Centershift – right 597.0 mm
• Maximum Blade Position Angle 65°
• Maximum depth of cut 488.0 mm
• Maximum lift above ground 395.0 mm
• Maximum shoulder reach outside of tires – left 2282.0 mm
• Maximum shoulder reach outside of tires – right 2587.0 mm
• Moldboard Sideshift – left 740.0 mm
• Moldboard Sideshift – right 1094.0 mm

TANDEMS

• Drive chain pitch 63.5 mm
• Height 648.0 mm
• Sidewall thickness – inner 22.0 mm
• Sidewall thickness – outer 22.0 mm
• Tandem oscillation – front down 25°
• Tandem oscillation – front up 15°
• Wheel axle spacing 1841.0 mm
• Width 236.0 mm

NET POWER: VHP - NET

• Gear: Forward - 1st 221.0 kW
• Gear: Forward - 2nd 225.0 kW
• Gear: Forward - 3rd 229.0 kW
• Gear: Forward - 4th 233.0 kW
• Gear: Forward - 5th 233.0 kW
• Gear: Forward - 6th 233.0 kW
• Gear: Forward - 7th 233.0 kW
• Gear: Forward - 8th 233.0 kW
• Gear: Reverse - 1st 221.0 kW
• Gear: Reverse - 2nd 225.0 kW
• Gear: Reverse - 3rd - 6th 229.0 kW

NET POWER: VHP PLUS – NET

• Gear: Forward – 1st 221.0 kW
• Gear: Forward – 2nd 225.0 kW
• Gear: Forward – 3rd 229.0 kW
• Gear: Forward – 4th 233.0 kW
• Gear: Forward – 5th 236.0 kW
• Gear: Forward – 6th 240.0 kW
• Gear: Forward – 7th 244.0 kW
• Gear: Forward – 8th 248.0 kW
• Gear: Reverse – 1st 221.0 kW
• Gear: Reverse – 2nd 225.0 kW
• Gear: Reverse – 3rd-6th 229.0 kW