Caterpillar-24M

Price not available

Caterpillar 24M M Series Motor Graders

Variants

Specifications of Caterpillar 24M M Series Motor Graders

Engine

  • Base Power (1st gear) – Net 397.0 kW
  • Base Power (all gears) – Net 397.0 kW
  • Displacement 18.1 L
  • Engine Model Cat® C18 ACERT™

Weights

  • Gross Vehicle Weight – Base – Front Axle 19131.0 kg
  • Gross Vehicle Weight – Base – Rear Axle 43595.0 kg
  • Gross Vehicle Weight – Base – Total 62726.0 kg
  • Gross Vehicle Weight – Maximum – Front Axle 20800.0 kg
  • Gross Vehicle Weight – Maximum – Rear Axle 48535.0 kg
  • Gross Vehicle Weight – Maximum – Total 65840.0 kg
  • Gross Vehicle Weight – Typically Equipped 65840.0 kg
  • Gross Vehicle Weight – Typically Equipped – Front Axle 19550.0 kg
  • Gross Vehicle Weight – Typically Equipped – Rear Axle 46290.0 kg
  • Gross Vehicle Weight – Typically Equipped – Total 65840.0 kg
  • Operating Weight – Typically Equipped 65840.0 kg

Service Refill Capacities

  • Circle drive housing 7.5 L
  • Cooling System 90.0 L
  • Engine Oil 60.0 L
  • Front wheel spindle bearing housing 4.0 L
  • Fuel Capacity 1326.0 L
  • Hydraulic System – Tank 135.0 L
  • Hydraulic System – Total 264.0 L
  • Tandem housing (each) 322.0 L
  • Transmission/Differential/Final Drives 184.0 L

Standards

  • Brakes ISO 3450
  • ROPS/FOPS ISO 3471/ISO 3449
  • Sound ISO 6394/ISO 6395
  • Steering ISO 5010

Operating Specifications

  • Articulation Angle – left/right 25°
  • Forward – 1st 3.7 km/h
  • Forward – 2nd 5.7 km/h
  • Forward – 3rd 9.7 km/h
  • Forward – 4th 15.1 km/h
  • Forward – 5th 28.0 km/h
  • Forward – 6th 43.4 km/h
  • Reverse – 1st 5.5 km/h
  • Reverse – 2nd 14.5 km/h
  • Reverse – 3rd 41.6 km/ h
  • Steering Range – left/right 47.5°
  • Top Speed – forward 43.4 km/h
  • Top Speed – reverse 41.6 km/ h
  • Turning Radius, outside front tires 12.4 m

Hydraulic System

  • Circuit Type Electro-hydraulic load sensing, closed center
  • Maximum System Pressure 24150.0 kPa
  • Pump Output 550.0 L/min
  • Pump Type Variable piston
  • Standby Pressure 3100.0 kPa

Power Train

  • Brakes – Parking Spring applied, hydraulically released
  • Brakes – Secondary Oil-actuated, oil-disc
  • Brakes – Service Oil-actuated, oil-disc
  • Brakes – Service, surface area 101508.0 cm2
  • Forward/Reverse Gears 6 Forward/3 Reverse
  • Transmission Automatic, electronic power shift

Ripper

  • Penetration force 13601.0 kg
  • Pryout Force 18621.0 kg
  • Ripper shank holders, quantity 7
  • Ripping depth – maximum 454.0 mm
  • Shank Holder Spacing – Maximum 604.0 mm
  • Shank Holder Spacing – Minimum 593.0 mm

FRAME

  • Circle – blade beam thickness 160.0 mm
  • Circle – diameter 2631.0 mm
  • Drawbar – height 215.0 mm
  • Drawbar – width 225. 0 mm
  • Front axle – height to center 817.0 mm
  • Front axle – total oscillation per side 32°
  • Front axle – wheel lean, left/right 18°

MOLDBOARD

  • Arc Radius 550.0 mm
  • Blade Pull – base GVW 39236.0 kg
  • Blade Pull – maximum GVW 43518.0 kg
  • Blade Width 7.3 m
  • Cutting Edge – thickness 29.0 mm
  • Cutting Edge – width 330.0 mm
  • Down Pressure – base GVW 31563.0 kg
  • Down Pressure – maximum GVW 34316.0 kg
  • End Bit – thickness 25.0 mm
  • End Bit – width 203.0 mm
  • Height 1025.0 mm
  • Thickness 50.0 mm
  • Throat Clearance 162.0 mm
  • Width 7.3 m

BLADE RANGE

  • Blade Tip Range – backward
  • Blade Tip Range – forward 40°
  • Circle Centershift – left 5332.0 mm
  • Circle Centershift – right 5338.0 mm
  • Maximum Blade Position Angle 35°
  • Maximum depth of cut 657.0 mm
  • Maximum lift above ground 634.0 mm
  • Maximum shoulder reach outside of tires – left 3222.0 mm
  • Maximum shoulder reach outside of tires – right 3228.0 mm
  • Moldboard Sideshift – left 4528.0 mm
  • Moldboard Sideshift – right 4902.0 mm

TANDEMS

  • Drive chain pitch 76.0 mm
  • Height 1040.0 mm
  • Sidewall thickness – inner 25.0 mm
  • Sidewall thickness – outer 30.0 mm
  • Tandem oscillation – front down 20°
  • Tandem oscillation – front up 20°
  • Wheel axle spacing 2285.0 mm
  • Width 353.0 mm

ENGINE – U.S. EPA TIER 4 INTERIM CERTIFIED

  • Standard - Ambient Capability 50.0 ° C
  • Standard - Fan Speed - Maximum 1325.0 RPM
  • Standard - Fan Speed - Minimum 60.0 RPM
  • Stroke 183.0 mm
  • Base Power (all gears) - Net 397.0 kW
  • Base Power (all gears) - Net (Metric) 397.0 kW
  • Bore 145.0 mm
  • Derating Altitude 2943.0 m
  • Displacement 18.1 L
  • Engine Model Cat® C18 ACERT™
  • Maximum Torque – Net 2713.0 N·m
  • Number of Cylinders 6
  • Speed @ Rated Power 1800.0 RPM

ENGINE – TIER 2

  • Base Power (all gears) – Net 397.0 kW
  • Base Power (all gears) – Net (Metric) 397.0 kW
  • Bore 145.0 mm
  • Derating Altitude 3048.0 m
  • Displacement 18.1 L
  • Engine Model Cat C18 ACERT
  • Maximum Torque – Net 2713.0 N·m
  • Number of Cylinders 6
  • Speed @ Rated Power 1800.0 RPM
  • Standard – Ambient Capability 50.0 ° C
  • Standard – Fan Speed – Maximum 1325.0 RPM
  • Standard – Fan Speed – Minimum 60.0 RPM
  • Stroke 183.0 mm
  • Torque Rise – Net 30.0 %

You can help other customers

Have you used this car?

Write A Review

Caterpillar 24M M Series Motor Graders Pictures

Select Equipment Dealers by Brand and City