Caterpillar 6030/6030 FS Base

Specifications of Caterpillar 6030/6030 FS Base

Engine

• Engine Model 2 × Cat® C27 ACERT™
• Gross Power – SAE J1995 1140.0 kW
• Net Power – SAE J1349 1140.0 kW
• Note Electric drive option available (1000 kW) on 6030 AC/6030 AC FS

Operating Weights

• Backhoe – Ground Pressure 22.1 N/cm2 (32.1 psi)
• Backhoe – Operating weight 296000.0 kg
• Backhoe – Standard track pads 1000.0 mm
• Face Shovel – Ground pressure 22.0 N/cm2 (31.9 psi)
• Face Shovel – Operating weight 293800.0 kg
• Face Shovel – Standard track pads 1000.0 mm

Operating Specifications

• Bucket Payload 30.0 tonnes
• Operating Weight – Backhoe 296.0 tonnes
• Operating Weight – Front Shovel 294.0 tonnes

Undercarriage

• Bottom Rollers (each side) 7
• Components 1 Running surfaces of sprockets, idlers, rollers & pad links, as well as teeth contact areas of sprocket & pad links, are hardened
• Components 2 Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
• Components 3 Fully hydraulic self-adjusting track tensioning system with membrane accumulator
• Components 4 Automatic hydraulic retarder valve to prevent over-speed on downhill travel
• Components 5 Acoustic travel alarm
• Gradeability of travel drives – approximate 64.0 %
• Maximum tractive force 1637.0 kN
• Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released
• Support Rollers (each side) 2 plus a skid plate in between
• Track Pads (each side) 47
• Travel Drives (each side) 1 planetary transmission with 2 two-stage axial piston motors
• Travel Speed: 1st Stage (maximum) 1.4 km/h
• Travel Speed: 2nd Stage (maximum) 2.7 km/h

OPERATOR’S CAB

• Board Control System (BCS III) Features: USB, Lan (TCP/IP) and CAN BUS interfaces for data export
• Board Control System (BCS III) Features: 2 On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
• Board Control System (BCS III) Features: 3 Robust instrument panel including large (12 in) colored touch screen for intuitive handling
• Board Control System (BCS III) Features: 4 Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube system
• Board Control System (BCS III) Features: 5 On-screen trouble shooting assistance
• Board Control System (BCS III) Features: 6 Graphic charts of logged data
• Board Control System (BCS III) Features: 7 Fault memory with storage of related conditions
• Components 1 Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
• Components 10 Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
• Components 11 Roller blind at windshield
• Components 2 Windshield with parallel intermittent wiper/washer
• Components 3 All-round safety glass, armored windshield and sliding side window
• Components 4 FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
• Components 5 Joystick controls integrated in independently adjustable seat consoles
• Components 6 Fold-away auxiliary seat with safety belt
• Components 7 Emergency exit harness kit
• Components 8 Machine access via retractable boarding ladder, hydraulically operated
• Internal dimensions of cab – Height 2150.0 mm
• Internal dimensions of cab – Length 2200.0 mm
• Internal dimensions of cab – Width 1600.0 mm
• Operator’s eye level – approximately 6.5 m

General Data

• Engine Output – SAE J1995 1140 kW (1, 530 hp)
• Engine output SAE J1995 – 2 × Cat C27 ACERT 1140.0 kW
• Operating Weight Face Shovel – 294 tonnes (324 tons); Backhoe – 296 tonnes (326 tons)
• Standard Bucket Capacity Face Shovel (heaped 2:1) – 16.5 m3 (21.6 yd3); Backhoe (heaped 1:1) – 17.0 m3 (22.2 yd3)

Buckets

• Bucket Capacity – Backhoe (heaped 1:1) 17.0 m3
• Bucket Capacity – Front Shovel (heaped 2:1) 16.5 m3

HYDRAULIC SYSTEM WITH PUMP MANAGING SYSTEM

• Hydraulic tank capacity – approximately 2500.0 L
• Main pumps 4 × variable swash plate pumps
• Main pumps – Maximum oil flow – AC version 4 × 543 L/min (4 × 143 gal/min)
• Main pumps – Maximum oil flow – Diesel version 4 × 552 L/min (4 × 146 gal/min)
• Maximum pressure, attachment 310.0 bar
• Maximum pressure, swing pumps 350.0 bar
• Maximum pressure, travel 360.0 bar
• Swing pumps 2 × reversible swash plate double pumps
• Swing pumps – Maximum oil flow – AC version 2 × 426 L/min (2 × 113 gal/min)
• Swing pumps – Maximum oil flow – Diesel version 2 × 394 L/min (2 × 104 gal/min)
• Total volume of hydraulic oil – approximately 3500.0 L

HYDRAULIC OIL COOLING

• Diameter of fans 2 × 1220 mm (2 × 48 in)
• Oil flow of cooling pumps – AC version 2 × 459 L/min (2 × 121 gal/min)
• Oil flow of cooling pumps – Diesel version 2 × 467 L/min (2 × 123 gal/min)

SWING SYSTEM

• Maximum swing speed – AC version 5.0 RPM
• Maximum swing speed – Diesel version 4.6 RPM
• Parking Brakes Wet multiple-disc brake, spring-loaded/hydraulically released
• Swing Drives 2 compact planetary transmissions with axial piston motors
• Swing Ring Triple-race roller bearing with sealed internal gearing

AUTOMATIC LUBRICATION SYSTEM

• Capacity of grease container 450.0 L

ELECTRICAL SYSTEM (DIESEL DRIVE)

• Batteries (12V each) in series/parallel installation 4 × 210 Ah; 420 Ah – 24V
• System voltage 24V
• Working spotlights 8 × high brightness Xenon lights

RETRACTABLE SERVICE STATION

• Installation Retractable service station installed underneath the engine module and easily accessible from ground.

DIESEL ENGINES

• Alternators 2 × 150A
• Aspiration Turbocharged and charge air-cooled
• Bore 137.7 mm
• Displacement 27.0 L
• Emissions U.S. E.P.A. Flex
• Fuel tank capacity 5360.0 L
• Make and model 2 × Cat C27 (U.S. EPA Tier 2)
• Maximum altitude without deration at 15° C (59° F) – above sea-level 1750.0 m
• Number of cylinders (each engine) 12
• Stroke 152.4 mm
• Total rated gross power – SAE J1995 1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
• Total rated net power – ISO 3046/1 1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
• Total rated net power – SAE J1349 1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)

ATTACHMENTS

• All buckets (FS and BH) are equipped with a wear package consisting of: – Special liner material covering main wear areas inside and outside of bucket – Lip shrouds between teeth
• All buckets (FS and BH) are equipped with a wear package consisting of: 2 – Wing shrouds on side walls – Heel shrouds at bottom edges
• Shovel attachment with unique TriPower kinematics ensuring the following main features: – Automatic roll-back limiter to prevent material spillage – Kinematic assistance to hydraulic forces
• Shovel attachment with unique TriPower kinematics ensuring the following main features: 2 – Horizontal automatic constant-angle bucket guidance – Vertical automatic constant-angle bucket guidance
• Shovel attachment with unique TriPower kinematics ensuring the following main features: 3 – Constant boom momentum throughout the whole lift arc – Crowd force assistance
• Type 1 Catwalks with rails at boom (FS and BH)
• Type 2 Special wear packages for highly abrasive materials on request
• Type 3 Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
• Type 4 Welding procedures allow for internal counter-welding (double prep weld) wherever possible
• Type 5 Booms and sticks are stress-relieved after welding
• Type 6 Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas

ELECTRIC MOTOR – 6030 AC/6030 AC FS

• Frequency 50 Hz (60 Hz on request)
• Output 1000 kW
• Rated current IN 109A (at 6.3 kV)
• Speed 1,500 min-1 (1,800 min-1 at 60 Hz)
• Starting current 450% of IN (253% of IN optional)
• Type Squirrel cage induction motor
• Voltage 6.3 kV ± 10% (other on request)