Caterpillar 6060/6060 FS Base

Ex-showroom Price

Price not available

Variants

Engine

Engine Model 2 × Cat® 3512C
Gross Power – SAE J1995 2240.0 kW
Net Power – SAE J1349 2240.0 kW
Note Electric drive option available (1800 kW) on 6060 AC/6060 AC FS

Operating Weights

6060 – Ground pressure 25.5 N/cm2 (37.0 psi)
6060 – Operating weight 570300.0 kg
6060 – Standard track pads 1400.0 mm
6060 AC – Ground pressure 24.5 N/cm2 (35.6 psi )
6060 AC – Operating weight 547700.0 kg
6060 AC – Standard track pads 1400.0 mm
6060 AC FS – Ground pressure 24.4 N/cm2 (35.4 psi)
6060 AC FS – Operating weight 546300.0 kg
6060 AC FS – Standard track pads 1400.0 mm
6060 FS – Ground pressure 25.4 N/cm2 (36.8 psi)
6060 FS – Operating weight 568900.0 kg
6060 FS – Standard track pads 1400.0 mm
Note Other track pads available on request.

Operating Specifications

Bucket Payload 61.0 tonnes
Operating Weight – Backhoe 570.0 tonnes
Operating Weight – Front Shovel 569.0 tonnes

Undercarriage

Bottom Rollers (each side) 7
Components 1 All running surfaces of sprockets, idlers, rollers & pad links, as well as teeth contact areas of sprocket & pad links, are hardened
Components 2 Acoustic travel alarm
Components 3 Cast double-grouser combined pad links with bushings connected by hardened full floating pins
Components 4 Bottom rollers are connected to the automatic lubrication system
Components 5 Fully hydraulic, self-adjusting track tensioning system with membrane accumulator
Components 6 Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Gradeability of travel drives – maximum 52.0 %
Maximum tractive force 2956.0 kN
Parking Brakes Wet multiple-disc brake, spring applied/hydraulically released
Support Rollers (each side) 2 plus a skid plate in between
Track Pads (each side) 42
Travel Drives (each side) 1 planetary transmission with 2 two-stage axial piston motors
Travel Speed: 1st Stage (maximum) 1.4 km/ h
Travel Speed: 2nd Stage (maximum) 2.0 km/h

OPERATOR’S CAB

Board Control System (BCS) Features: Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic system & lubrication system
Components 1 Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
Components 10 Robust instrument panel including large colored BCS screen with transflective technology
Components 11 Sliding emergency ladder (kick-down type) with ladder cage
Components 12 Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
Components 13 Roller blinds at all windows
Components 2 Under roof mounted heating ventilating and air conditioning system
Components 3 Windshield with parallel intermittent wiper/washer
Components 4 All-round safety glass, armored windshield and sliding side window
Components 5 FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
Components 6 Fold-away auxiliary seat with safety belt
Components 7 External sun shields at side and rear windows
Components 8 Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components 9 Joystick controls integrated in independently adjustable seat consoles
Internal dimensions of cab – Height 2150.0 mm
Internal dimensions of cab – Length 2200.0 mm
Internal dimensions of cab – Width 1600.0 mm
Operator’s eye level – approximately 7.6 m

General Data

Engine Output – SAE J1995 Cat 3512C – 2240 kW (3,000 hp)
Operating Weight Face Shovel – 569 tonnes (627 tons); Backhoe – 570 tonnes (628 tons)
Standard Bucket Capacity Face Shovel (heaped 2:1) – 34.0 m3 (44.5 yd3); Backhoe (heaped 1:1) – 34.0 m3 (44.5 yd3)

Buckets

Bucket Capacity – Backhoe (heaped 1:1) 34.0 m3
Bucket Capacity – Front Shovel (heaped 2:1) 34.0 m3

HYDRAULIC SYSTEM WITH PUMP MANAGING SYSTEM

Hydraulic tank capacity – AC version – approximately 5100.0 L
Hydraulic tank capacity – Diesel version – approximately 7100.0 L
Main pumps – AC version 4 × variable flow axial piston pumps
Main pumps – Diesel version 4 × swash plate double pumps
Main pumps – Maximum oil flow – AC version 4 × 933 L/min (4 × 246 gal/min)
Main pumps – Maximum oil flow – Diesel version 4 × 1300 L/min (4 × 343 gal/min)
Maximum pressure, attachment 320.0 bar
Maximum pressure, swing pumps 370.0 bar
Maximum pressure, travel 370.0 bar
Swing pumps – AC version 3 × reversible swash plate pumps
Swing pumps – Diesel version 4 × reversible swash plate pumps
Swing pumps – Maximum oil flow – AC version 3 × 491 L/min (3 × 131 gal/min)
Swing pumps – Maximum oil flow – Diesel version 4 × 352 L/min (4 × 93 gal/min)
Total volume of hydraulic oil – AC version – approximately 7300.0 L
Total volume of hydraulic oil – Diesel version – approximately 9400.0 L

HYDRAULIC OIL COOLING

Components Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Diameter of fans 4 × 1170 mm (4 × 46 in)
Features 1 Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Features 2 Fan speed and flow of oil to the coolers are thermostatically controlled
Features 3 Extremely high cooling efficiency to ensure optimum oil temperature
Oil Flow of Cooling Pumps 4 × 488 L/min (4 × 129 gal/min)

SWING SYSTEM

Features 1 Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Features 2 Closed-loop swing circuit with torque control
Features 3 Hydraulic braking of the swing motion by counteracting control
Features 4 All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
Maximum Swing Speed 3.8 RPM
Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released
Swing Drives 4 compact planetary transmissions with axial piston motors
Swing Ring Triple-race roller bearing with sealed internal gearing

AUTOMATIC LUBRICATION SYSTEM

Capacity of grease container 1000.0 L
Type 1 Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Type 2 System failures displayed by Board Control System
Type 3 Grease filters (200 μm) between service station and container as well as directly behind grease pump
Type 4 Connected to main lube system are: – pivot points of attachment, bucket and cylinders – bottom rollers of undercarriage
Type 5 Connected to main lube system are: – raceways of swing roller bearing – 2 greasing pinions for the internal gearing of swing ring

ELECTRICAL SYSTEM (DIESEL DRIVE)

Batteries in series/parallel installation 6 × 210 Ah – 12V each; 630 Ah – 24V in total
Components 1 16 LED service lights
Components 2 Battery isolation relays and switches
Components 3 Emergency stop switches accessible from ground level and in engine module
Components 4 12 LED high-brightness working flood lights – 10 for working area – 2 for rear end
Components 5 2 LED high-brightness access flood lights
System voltage 24V

RETRACTABLE SERVICE STATION

Installation Retractable service station installed underneath the engine module and easily accessible from ground.

DIESEL ENGINES

Alternators 2 × 150 A
Aspiration Turbocharged and charge air-cooled
Bore 170.0 mm
Components 1 Additional high-capacity water separator
Components 2 Two-stage fuel filter including water separator
Components 3 Heavy-duty air filters
Components 4 Microprocessed engine management
Components 5 Hydraulically driven radiator fan with electronically controlled fan speed
Displacement 58.6 L
Emissions U.S. EPA flex
Fuel tank capacity 13000.0 L
Make and model 2 × Cat 3512C (Tier 2)
Maximum altitude without deration at 20° C (68° F) – above sea level 3000.0 m
Number of cylinders (each engine) 12
Stroke 215.0 mm
Total rated gross power – SAE J1995 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
Total rated net power – ISO 3046/1 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
Total rated net power – SAE J1349 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)

ATTACHMENTS

All buckets (FS and BH) are equipped with a wear package consisting of: – Special liner material covering main wear areas inside and outside of bucket – Lip shrouds between teeth
All buckets (FS and BH) are equipped with a wear package consisting of: 2 – Wing shrouds on side walls – Heel shrouds at bottom edges
Shovel attachment with unique TriPower kinematics ensuring the following main features: – Automatic roll-back limiter to prevent material spillage – Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: 2 – Horizontal automatic constant-angle bucket guidance – Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: 3 – Constant boom momentum throughout the entire lift arc – Crowd force assistance
Type Special wear packages for highly abrasive materials on request
Type 1 Catwalks with rails at booms
Type 2 Guards for shovel cylinders (FS)
Type 3 Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type 4 Inspection holes in booms (FS and BH) and stick (FS)
Type 5 Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type 6 Booms and sticks are stress-relieved after welding
Type 7 Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas