Caterpillar-730C EJ

Price not available

Caterpillar 730C EJ Base

Variants

Specifications of Caterpillar 730C EJ Base

Engine

  • Bore 130.0 mm
  • Displacement 12.5 L
  • Engine Model Cat C13 ACERT
  • Engine Model – U.S. EPA Tier 2 FinalEngine Model – U.S. EPA Tier 2 Final/EU Stage II Cat® C13 ACERT™
  • Gross Power – SAE J1995 280.0 kW
  • Net Power – ISO 14396 276.0 kW
  • Net Power – SAE J1349 274.0 kW
  • No Engine De-rating Required Below 3990.0 m
  • Peak Engine Torque Gross (SAE J1995) 1830.0 N·m
  • Peak Engine Torque Net (ISO 14396) 1810.0 N·m
  • Peak Engine Torque Speed 1200.0 RPM
  • Stroke 157.0 mm

Weights

  • Rated Payload 28.0 tonnes

Body Capacities

  • Heaped SAE 2:1 16.9 m3
  • Struck 13.5 m3

Transmission

  • Forward 1 8.0 km/h
  • Forward 2 15.0 km/h
  • Forward 3 22.0 km/h
  • Forward 4 34.0 km/h
  • Forward 5 47.0 km/h
  • Forward 6 55.0 km/h
  • Reverse 1 9.0 km/h

Sound Levels

  • Interior Cab 76.0 dB(A)

Operating Weights

  • Center Axle – Empty 5740.0 kg
  • Center Axle – Loaded 19465.0 kg
  • Center Axle – Rated Load 13725.0 kg
  • Front Axle – Empty 15250.0 kg
  • Front Axle – Loaded 15920.0 kg
  • Front Axle – Rated Load 670.0 kg
  • Rear Axle – Empty 5410.0 kg
  • Rear Axle – Loaded 19135.0 kg
  • Rear Axle – Rated Load 13725.0 kg
  • Total – Empty 26400.0 kg
  • Total – Loaded 54520.0 kg
  • Total – Rated Load 28120.0 kg

Service Refill Capacities

  • Cooling System 83.0 L
  • Engine Crankcase 40.0 L
  • Final Drives/Differential 135.0 L
  • Fuel Tank 412.0 L
  • Hydraulic System 110.0 L
  • Output Transfer Gear Box 24.0 L
  • Transmission 35.0 L

Body Hoist

  • Lower Time 15.0 Seconds
  • Raise Time 12.0 Seconds

Steering

  • Lock to Lock 4.75 seconds @ 60 rpm

Standards

  • Brakes ISO 3450 – 2011
  • Cab/FOPS ISO 3449 Level II – 2005
  • Cab/ROPS ISO 3471 – 2008
  • Steering ISO 5010 – 2007

Body Plate

  • Type High Strength Brinell HB450 Wear Resistant Steel

Turning Circle

  • Note Dimensions are for machines equipped with 750/65 tires.
  • Turning Dimensions – Aisle width 5424.0 mm
  • Turning Dimensions – Clearance radius 8075.0 mm
  • Turning Dimensions – Inside radius 3749.0 mm
  • Turning Dimensions – SAE turning radius 7470.0 mm
  • Turning Dimensions – Steer angle – left/right 45.0 Degrees

You can help other customers

Have you used this car?

Write A Review

Caterpillar 730C EJ Base Pictures

Select Equipment Dealers by Brand and City