Caterpillar 740C EJ Base

Specifications of Caterpillar 740C EJ Base

Engine

• Bore 145.0 mm
• Displacement 18.1 L
• Engine Model Cat C18 ACERT
• Engine Model – U.S. EPA Tier 2/EU Stage II Cat® C18 ACERT™
• Gross Power – SAE J1995 381.0 kW
• Net Power – ISO 14396 376.0 kW
• Net Power – SAE J1349 370.0 kW
• No Engine De-rating Required Below 3050.0 m
• Peak Engine Torque Gross (SAE J1995) 2618.0 N·m
• Peak Engine Torque Net (SAE J1349) 2558.0 N·m
• Peak Engine Torque Speed 1200.0 rpm
• Stroke 183.0 mm

Weights

• Rated Payload 38.0 tonnes

Body Capacities

• Heaped SAE 2:1 23.0 m3
• Struck 18.0 m3

Transmission

• Forward 1 6.1 km/h
• Forward 2 8.1 km/h
• Forward 3 11.2 km/h
• Forward 4 14.1 km/h
• Forward 5 18.7 km/h
• Forward 6 22.9 km/h
• Reverse 1 6.4 km/h
• Reverse 2 14.6 km/h

Sound Levels

• Interior Cab 79.0 dB(A)

Operating Weights

• Center Axle – Empty 7950.0 kg
• Center Axle – Loaded 26150.0 kg
• Center Axle – Rated Load 18200.0 kg
• Front Axle – Empty 19880.0 kg
• Front Axle – Loaded 21480.0 kg
• Front Axle – Rated Load 1600.0 kg
• Rear Axle – Empty 7710.0 kg
• Rear Axle – Loaded 25910.0 kg
• Rear Axle – Rated Load 18200.0 kg
• Total – Empty 35540.0 kg
• Total – Loaded 73540.0 kg
• Total – Rated Load 38000.0 kg

Service Refill Capacities

• Axles (each) 60.0 L
• Brake Cooling Tank 67.0 L
• Cooling System 90.0 L
• Engine Crankcase 52.0 L
• Final Drives (each) 5.0 L
• Fuel Tank 550.0 L
• Steering/Hoist Hydraulic System 140.0 L
• Transmission/OTG 75.0 L

Body Hoist

• Eject Time 17.0 Seconds
• Retract Time 20.0 Seconds

Steering

• Lock to Lock 4.8 seconds @ 60 rpm

Body Plate

• Type High strength Brinell HB450 wear resistant steel

Turning Radius

• Note Dimensions are for machines equipped with 29.5R25 tires.
• Turning Dimensions: Aisle Width 5961.0 mm
• Turning Dimensions: Clearance Radius 9082.0 mm
• Turning Dimensions: Inside Radius 4413.0 mm
• Turning Dimensions: SAE Turning Radius 8624.0 mm
• Turning Dimensions: Steer Angle – Left/Right 45°