Caterpillar 777D Base
Ex-showroom Price
Price not available
Variants
Caterpillar 777D Base Truck Description
The Caterpillar 777D Base is a legend in the mining industry, known as a massive off-highway dump truck. This truck is designed to carry millions of tons of material at mining sites. Its massive engine and sturdy body ensure exceptional performance even on the toughest mountain mining routes. Check out its payload capacity and fuel tank details on MotorBazee. For large mining projects, this truck is the perfect choice.
Key Specifications of Caterpillar 777D Base Equipment
-
Wheelbase
4570.0 mm
Calculate Caterpillar 777D Base Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar 777D Base
Engine
- Bore 170.0 mm
- Displacement 34.5 L
- Engine Model Cat® 3508B EUI
- Flywheel Power 699.0 kW
- Gross Power – SAE J1995 746.0 kW
- Net Power – 80/1269/EEC 699.0 kW
- Net Power - Cat 699.0 kW
- Net Power – ISO 9249 699.0 kW
- Net Power – SAE J1349 699.0 kW
- Peak Torque 4713.0 N·m
- Stroke 190.0 mm
- Torque Rise 23.0 %
Transmission
- Forward 1 10.5 km/h
- Forward 2 14.3 km/h
- Forward 3 19.3 km/h
- Forward 4 26.0 km/h
- Forward 5 34.9 km/h
- Forward 6 46.6 km/h
- Forward 7 60.4 km/h
- Reverse 11.9 km/h
Service Refill Capacities
- Cooling System 268.0 L
- Crankcase 91.0 L
- Differentials and Final Drives 306.0 L
- Fuel Tank 1137.0 L
- Steering Tank 40.0 L
- Torque Converter / Brake / Hoist Hydraulic Tank 250.0 L
- Torque Converter / Transmission Tank 95.0 L
Body Hoist
- Body Lower Time – Float 13.0 Seconds
- Body Power Down – High Idle 13.0 Seconds
- Body Raise Time – High Idle 15.0 Seconds
- Pump Flow – High Idle 498.0 L/min
- Relief Valve Setting – Lower 18950.0 kPa
- Relief Valve Setting – Raise 18962.0 kPa
Steering
- Steering Standards SAE J1511 OCT90, ISO 5010:1992 (E)
Operating Specifications
- Body Capacity – SAE 2:1 60.1 m3
- Body Capacity - Struck 42.1 m3
- Nominal Payload Capacity 90.4 tonnes
- Top Speed – Loaded 60.4 km/h
Dimensions
- Centerline Front Tire Width 4173.0 mm
- Centerline Rear Dual Tire Width 3576.0 mm
- Dump Clearance 1128.0 mm
- Engine Guard Clearance 700.0 mm
- Front Canopy Height 5147.0 mm
- Ground Clearance 750.0 mm
- Height - Top of ROPS 4567.0 mm
- Inside Body Depth - Maximum 1959.0 mm
- Inside Body Length 7234.0 mm
- Inside Body Width 5200.0 mm
- Loading Height - Empty 4380.0 mm
- Operating Width 6105.0 mm
- Overall Body Length 9581.0 mm
- Overall Canopy Width 6099.0 mm
- Overall Height - Body Raised 10059.0 mm
- Overall Length 9780.0 mm
- Overall Tire Width 5262.0 mm
- Rear Axle Clearance 750.0 mm
- Rear Axle to Tail 2968.0 mm
- Wheelbase 4570.0 mm
Tires
- Standard Tires 27.00-R49 (E4) Tire
Brakes
- Brake Surface – Front 2787.0 cm2
- Brake Surface – Rear 102116.0 cm2
Sound
- Sound Standards ANSI/SAE J1166 MAY90, SAE J88 JUN96
Final Drives
- Differential Ratio 2.74:1
- Planetary Ratio 7.00:1
- Total Reduction Ratio 19.16:1
Suspension
- Effective Cylinder Stroke - Front 318.0 mm
- Effective Cylinder Stroke - Rear 165.0 mm
- Rear Axle Oscillation 5.4 Degrees
Approximate Weights - Dual Slope
- Body 16070.0 kg
- Chassis 46600.0 kg
- Empty vehicle 64670.0 kg
Capacity - Dual Slope - 100% Fill Factor
- Heaped (SAE 2:1) 60.1 m3
- Struck 42.1 m3
Weights - Approximate
- Operating Weight - Empty 64670.0 kg
- Target Gross Machine Operating Weight 163360.0 kg
Weight Distributions - Approximate
- Front Axle – Empty 47.0 %
- Front Axle – Loaded 33.0 %
- Rear Axle – Empty 53.0 %
- Rear Axle – Loaded 67.0 %
ROPS
- ROPS/FOPS Standards SAE J1040 MAY94, ISO 3471:1997
Caterpillar 777D Base Reviews
0.0
Overall
Based on 0 Reviews
Write Review
