Caterpillar 797F Mining Trucks
Ex-showroom Price
Price not available
Variants
Caterpillar 797F Mining Trucks Truck Description
The Caterpillar 797F Mining Trucks is one of the world’s largest and most powerful mining trucks, designed to carry the heaviest payloads. Its massive engine and robust design make it the king of mining sites. Find detailed information about its amazing loading capacity and technical innovations on MotorBazee. The Caterpillar 797F is used in large mines to achieve massive output and efficiency.
Key Specifications of Caterpillar 797F Mining Trucks Equipment
-
Wheelbase
7195.0 mm
Calculate Caterpillar 797F Mining Trucks Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar 797F Mining Trucks
Engine
- Bore 175.0 mm
- Displacement 106.0 L
- Engine Model Cat C175-20
- Gross Power – SAE J1995 2983.0 kW
- Net Power 2828.0 kW
- Net Power – SAE J1349 (1st gear/2nd-4th gear) 2828.0 kW
- Stroke 220.0 mm
Transmission
- Forward 1 11.3 km/h
- Forward 2 15.2 km/h
- Forward 3 20.5 km/h
- Forward 4 27.7 km/h
- Forward 5 37.2 km/h
- Forward 6 50.2 km/h
- Forward 7 67.6 km/h
- Reverse 11.9 km/h
Service Refill Capacities
- Brake/Hoist Hydraulic Lines 830.0 L
- Brake/Hoist System (Includes Tank) 1600.0 L
- Brake/Hoist Tank 770.0 L
- Cooling System 1160.0 L
- Crankcase 319.0 L
- Differentials 1176.0 L
- Final Drives, Each 185.0 L
- Front Wheels, Each 61.0 L
- Fuel Tank (standard) 3785.0 L
- Steering System (Includes Tank) 355.0 L
- Steering Tank 254.0 L
- Torque Converter Sump 303.0 L
- Torque Converter/Transmission System (Includes Sump) 629.0 L
Body Hoist
- Body Raise Time – High Idle 25.0 Seconds
- High Idle Body Lower Time – Float 19.0 Seconds
- Pump Flow – High Idle 1200.0 L/min
- Relief Valve Setting – Raise 24200.0 kPa
Steering
- Steering Standards SAE J1511 OCT90, ISO 5010:1992
Operating Specifications
- Heaped SAE (2:1) Capacity 240-267 m3 (314-350 yd3)
- Machine Clearance Turning Diameter 42.0 m
- Nominal Payload Capacity 363.0 tonnes
- Steer Angle 40.0 Degrees
- Top Speed – Loaded 67.6 km/h
- Turning Circle Clearance Diameter 42.0 m
Dimensions
- Centerline Front Tire Width 6534.0 mm
- Centerline Rear Dual Tire Width 6233.0 mm
- Dump Clearance 2017.0 mm
- Engine Guard Clearance – Full 1025.0 mm
- Front Canopy Height - Empty 7709.0 mm
- Height to Top of ROPS - Empty 6526.0 mm
- Inside Body Depth – Max 3363.0 mm
- Inside Body Length 9976.0 mm
- Inside Body Width 8513.0 mm
- Loaded Ground Clearance 786.0 mm
- Loading Height – Empty 6998.0 mm
- Outside Body Width 9755.0 mm
- Overall Body Length 14802.0 mm
- Overall Canopy Width 9116.0 mm
- Overall Height – Body Raised 15701.0 mm
- Overall Length 15080.0 mm
- Overall Tire Width 9529.0 mm
- Rear Axle Clearance - Full 947.0 mm
- Rear Axle to Tail 3944.0 mm
- Wheelbase 7195.0 mm
Tires
- Tires 59/80R63 - Michelin or Bridgestone
Brakes
- Brake Surface 330517.0 cm2
- Number of Discs Per Side - Front 10.0
- Number of Discs Per Side - Rear 15.0
- Outside Diameter 1067.0 mm
- Standards J-ISO 3450 JAN88, ISO 3450-1996
Sound
- Sound Standards SAE J919:1995, ANSI/SAE J166:2008, ISO 6394:2008, ISO 6396:2008, ISO 6393:2008, ISO 6395:2008, SAW J88:2006
Final Drives
- Differential Ratio 1.276:1
- Planetary Ratio 16.67:1
- Total Reduction Ratio 21.26:1
Suspension
- Effective Cylinder Stroke – Front 313.6 mm
- Effective Cylinder Stroke – Rear 165.1 mm
- Rear Axle Oscillation ±4.0 degrees
Approximate Weights – MSD II
- Front Axle - Empty 47.2 %
- Front Axle - Loaded 33.3 %
- Rear Axle - Empty 52.8 %
- Rear Axle - Loaded 66.7 %
Weights - Approximate
- Body Weight Range 41 368-61 235 kg (91,200-135,000 lb)
- Chassis Weight Range 210 630-219 146 kg (464,359-483,134 lb)
- Gross Machine Operating Weight (GMW) 623690.0 kg
Weight Distributions - Approximate
- Front Axle – Empty 47.2 %
- Front Axle – Loaded 33.3 %
- Rear Axle – Empty 52.8 %
- Rear Axle – Loaded 66.7 %
ROPS
- ROPS Standards ISO 3471-1994
Caterpillar 797F Mining Trucks Reviews
0.0
Overall
Based on 0 Reviews
Write Review
