Caterpillar 825H Base

Specifications of Caterpillar 825H Base

Engine

• Bore 137.0 mm
• Displacement 15.2 L
• EEC 80/1269 264.0 kW
• Engine Model Cat® C15 ACERT™
• Flywheel Power 264.0 kW
• Gross Power 299.0 kW
• ISO 9249 264.0 kW
• Power – Net 264.0 kW
• SAE J1349 261.0 kW
• Stroke 171.0 mm

Transmission

• Forward 1 5.3 km/h
• Forward 2 9.3 km/h
• Forward 3 15.6 km/h
• Reverse 1 6.1 km/h
• Reverse 2 10.6 km/h
• Reverse 3 17.2 km/h

Service Refill Capacities

• Cooling System 83.0 L
• Differentials and Final Drives – Front 90.0 L
• Differentials and Final Drives - Rear 90.0 L
• Engine Crankcase 34.0 L
• Fuel Tank 603.0 L
• Transmission 62.0 L

Operating Specifications

• Turning Radius Blade - Inside 7417.0 mm
• Turning Radius Blade - Outside 3362.0 mm

Dimensions

• Blade Height Straight 1034.0 mm
• Blade Width Straight 4390.0 mm
• Center Line of Rear Axle to Edge of Counterweight 2687.0 mm
• Center Line of Rear Axle to Edge of Rear Bumper 1850.0 mm
• Drum Width 1125.0 mm
• Ground Clearance 414.0 mm
• Height to Bottom of Ladder 502.0 mm
• Height to Rear Bumper 941.0 mm
• Height to Top of Cab 3755.0 mm
• Height to Top of Exhaust Pipe 3647.0 mm
• Height to Top of Hood 2692.0 mm
• Length with Blade on Ground 8443.0 mm
• Wheelbase 3700.0 mm
• Width Over Drums 3650.0 mm
• Width Over End Bits 4628.0 mm

Hydraulic System

• Lift Cylinder Bore x Stroke 24125.0 kPa
• Relief Valve Setting 95.25 mm x 711 mm (3.7 in x 28 in)

Axles

• Front Fixed
• Rear Oscillating ±9

Brakes

• Standards Meet SAE/ISO 3450:1996

Sound Performance

• Standards Meets ANSI/SAE, SAE and ISO requirements

Cab

• ROPS/FOPS Meets SAE and ISO standards

Shipping Specifications

• Height 3755.0 mm
• Weight 31200.0 kg
• Width 4390.0 mm

Wheels

• Drum Diameter 1299.0 mm
• Drum Width 1125.0 mm
• Outside Diameter 1677.0 mm
• Wheel Weight 1766.0 kg

Blades

• Maximum Lift Above Ground 932.0 mm
• Moldboard Length 4390.0 mm
• Total Tilt Adjustment 787.0 mm
• Width Over End Bits 4628.0 mm
• Blade Tilt Angle - Left - Hydraulic 5.6 Degrees
• Blade Tilt Angle - Left - Mechanical 4.3 Degrees
• Blade Tilt Angle - Left Full 10.0 Degrees
• Blade Tilt Angle - Right - Hydraulic 5.6 Degrees
• Blade Tilt Angle - Right - Mechanical 4.3 Degrees
• Blade Tilt Angle - Right Full 10.0 Degrees
• Blade Tip Angle - Back 6.6 Degrees
• Blade Tip Angle - Forward 6.9 Degrees
• Blade Tip Angle - Total 13.5 Degrees
• Height, Including Cutting Edge 1034.0 mm
• Maximum Depth of Cut 312.0 mm