Caterpillar-854K

Price not available

Caterpillar 854K Large Wheel Dozers

Variants

Specifications of Caterpillar 854K Large Wheel Dozers

Engine

  • Bore 145.0 mm
  • Displacement 32.1 L
  • Emissions (Tier 2 Equivalent): Gross Power – SAE J1995 676.0 kW
  • Emissions (Tier 2 Equivalent): Net Power ISO – 9249 607.0 kW
  • Emissions (U.S. EPA Tier 4 Final): Gross Power – SAE J1995 671.0 kW
  • Emissions (U.S. EPA Tier 4 Final): Net Power ISO – 9249 607.0 kW
  • Engine Model Cat® C32 ACERT™
  • Gross Power 676.0 kW
  • Peak Torque @ 1,200 rpm 4242.0 N·m
  • Rated Speed 1750.0 RPM
  • Stroke 162.0 mm
  • Torque Rise 30.0 %

Weights

  • Operating Weight 101720.0 kg
  • Operating Weight – Ripper 109420.0 kg

Transmission

  • Converter Drive – Forward 1 7.1 km/h
  • Converter Drive – Forward 2 12.4 km/h
  • Converter Drive – Forward 3 21.2 km/h
  • Converter Drive – Reverse 1 7.7 km/h
  • Converter Drive – Reverse 2 13.5 km/h
  • Converter Drive – Reverse 3 23.5 km/h
  • Direct Drive – Forward 1 Lock-up disabled
  • Direct Drive – Forward 2 13.0 km/h
  • Direct Drive – Forward 3 22.8 km/h
  • Direct Drive – Reverse 1 8.0 km/h
  • Direct Drive – Reverse 2 14.3 km/h
  • Direct Drive – Reverse 3 25.1 km/h
  • Transmission Type Cat Planetary Power Shift

Service Refill Capacities

  • Cooling System 200.0 L
  • Crankcase 120.0 L
  • Differentials and Final Drives – Front 369.0 L
  • Differentials and Final Drives – Rear 342.0 L
  • Fuel Tank – Ripper 1335.0 L
  • Fuel Tank – Standard 1562.0 L
  • Hydraulic System – Implement and Brakes (Tank Only) 326.0 L
  • Hydraulic System – Steering and Engine Cooling Fan (Tank Only) 290.0 L
  • Transmission 169.0 L

Steering

  • Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi) 470.0 L/min
  • Minimum Turning Radius (over bucket) 9550.0 mm
  • Relief Valve Setting 34500.0 kPa
  • Total Steering Angle 82.0 Degrees

Axles

  • Front Fixed
  • Maximum Single-Wheel Rise and Fall 573.0 mm
  • Rear Oscillating at ±10 degrees

Brakes

  • Brakes Meets ISO 3540:1996

Dimensions (Approximate)

  • Center Line of Front Axle to Hitch 2945.0 mm
  • Center Line of Rear Axle to Edge of Bumper 4195.0 mm
  • Center Line of Rear Axle to Edge of Ripper Mount 4200.0 mm
  • Departure Angle 14.0 Degrees
  • Ground Clearance 691.0 mm
  • Height to Top of Exhaust Pipe 5234.0 mm
  • Height to Top of Hood 3984.0 mm
  • Height to Top of ROPS 5590.0 mm
  • Length with Blade and Ripper on Ground 15604.0 mm
  • Length with Blade on Ground 13405.0 mm
  • Maximum Ripper Depth 681.0 mm
  • Maximum Ripper Raise 1189.0 mm
  • Wheelbase 5890.0 mm
  • Width Between Outside Tines 3102.0 mm
  • Width Between Tines 1551.0 mm

Cab

  • Air Conditioning Standard air conditioning system contains environmentally friendly R134a refrigerant
  • Cab - ROPS/FOPS Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
  • Cab – ROPS/FOPS SAE J11040 APR88, ISO 3471:2008, ISO 3471:1994
  • FOPS FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
  • ROPS ROPS meets SAE J11040 APR88, ISO 3471:2008 and ISO 3471:1994 criteria.
  • Sound Performance The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
  • Sound Performance* The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
  • Sound Performance** Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
  • Sound Performance. The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).

Blades

  • Blade Capacities 25 to 45 m3 (33 to 58 yd3)

HYDRAULIC SYSTEM - LIFT/TILT

  • Cylinder, Double-acting: Lift, Bore and Stroke 177 mm × 1760 mm (0.58 ft × 5.8 ft)
  • Cylinder, Double-acting: Tilt and Tip, Bore and Stroke 267 mm × 286 mm (0.88 ft × 0.94 ft)
  • Output at 1,850 rpm and 6900 kPa (1,000 psi) 610.0 L/min
  • Relief Valve Setting – Lift (Large Pump) 22675.0 kPa
  • Relief Valve Setting – Tilt (Small Pump) 24560.0 kPa

MODEL: 854K (TIER 4)

  • Serial Number Prefix H8M

MODEL: 854K (TIER 2)

  • Serial Number Prefix H9K

HYDRAULIC SYSTEM – RIPPER (OPTIONAL)

  • Cylinder, Double-acting: Lift, Bore and Stroke 184 mm × 454 mm (0.60 ft × 1.5 ft)
  • Main Relief Pressure 19325.0 kPa
  • Output at 1,850 rpm and 6900 kPa (1,000 psi) 212.0 L/min

You can help other customers

Have you used this car?

Write A Review

Caterpillar 854K Large Wheel Dozers Pictures

Select Equipment Dealers by Brand and City