Caterpillar 950 GC Medium Wheel Loaders
Ex-showroom Price
Price not available
Variants
Caterpillar 950 GC Medium Wheel Loaders Truck Description
The Caterpillar 950 GC Medium Wheel Loader is the perfect combination of reliability and simplicity. It is designed for tasks where durable performance is essential. Check its breakout force and technical data on MotorBazee.com. With low maintenance and high uptime, this Caterpillar model is a valuable asset for contractors, making material handling easy and efficient every day.
Key Specifications of Caterpillar 950 GC Medium Wheel Loaders Equipment
-
Wheelbase
3300.0 mm
Calculate Caterpillar 950 GC Medium Wheel Loaders Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar 950 GC Medium Wheel Loaders
Engine
- Bore 105.0 mm
- Displacement 7.01 L
- Engine Model Cat® C7.1
- Max Gross Power @ 2,000 rpm - ISO 14396 171.0 kW
- Max Gross Torque @ 1,400 rpm 1020.0 N·m
- Max Net Torque @ 1,300 rpm 931.0 N·m
- Net Power - ISO 9249 151.0 kW
- Rated Gross Power @ 2,200 rpm - ISO 14396 168.0 kW
- Rated Net Power @ 2,200 rpm - ISO 9249 151.0 kW
- Stroke 135.0 mm
Weights
- Operating Weight 18676.0 kg
Transmission
- Forward 1 7.0 km/h
- Forward 2 12.5 km/h
- Forward 3 22.0 km/h
- Forward 4 34.0 km/h
- Reverse 1 7.0 km/h
- Reverse 2 12.5 km/h
- Reverse 3 22.0 km/h
Service Refill Capacities
- Cooling System 48.0 L
- Crankcase 20.0 L
- Differentials and Final Drives - Front 40.0 L
- Differentials and Final Drives - Rear 38.0 L
- Fuel Tank Size 290.0 L
- Hydraulic Tank 120.0 L
- Transmission 45.0 L
Operating Specifications
- Breakout Force 147.0 kN
- Note **Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
- Note-2 *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Static Tipping Load Full 40° Turn - ISO 14397-1* 10503.0 kg
- Static Tipping Load Full 40° Turn - Rigid Tires** 11197.0 kg
Dimensions
- Lift arm clearance @ maximum lift 3649.0 mm
- Rack Back @ Carry 45.0 Degrees
- Rack Back @ Ground 40.0 Degrees
- Rack Back @ Maximum Lift 60.0 Degrees
- Wheelbase 3300.0 mm
- B-Pin Height 4188.0 mm
- B-Pin Height @ Carry 655.0 mm
- Center Line of Rear Axle to Edge of Counterweight 2001.0 mm
- Center Line of Rear Axle to Hitch 1650.0 mm
- Dump Angle @ Maximum Lift 52.0 Degrees
- Ground Clearance 460.0 mm
- Height to Center Line of Axle 750.0 mm
- Height to Top of Exhaust Pipe 3596.0 mm
- Height to Top of Hood 2568.0 mm
- Height to Top of ROPS/FOPS 3458.0 mm
Hydraulic System
- Hydraulic Cycle Time - Dump, at Maximum Raise 1.2 Seconds
- Hydraulic Cycle Time - Lower, Empty, Float Down 2.8 Seconds
- Hydraulic Cycle Time - Raise from Carry Position 6.1 Seconds
- Hydraulic Cycle Time - Total Cycle Time 10.1 Seconds
- Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min 27900.0 kPa
- Implement System - Maximum Pump Output @ 2,200 rpm 248.0 L/min
- Implement System - Optional 3rd Function Maximum Flow 280.0 L/min
- Implement System - Optional 3rd Function Maximum Pressure @ 70 L/min 20680.0 kPa
- Implement System Pump Type Piston
- Steering System Pump Type Piston
Tires
- Choices Choices include: 23.5-25 16PR, L3 (Triangle); 23.5R25 ★★, L3 (Triangle); 23.5R25 ★, L3 (Bridgestone)
Brakes
- Brakes Brakes meet ISO 3450
Cab
- ROPS/FOPS ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
Buckets
- Bucket Capacities 2.9 m3 to 4.4 m3 (3.8 yd3 to 5.75 yd3)
Turning Radius
- Turning Radius to Inside of Tires 3419.0 mm
- Turning Radius to Outside Edge of Counterweight 6190.0 mm
- Turning Radius to Outside of Tires 6164.0 mm
- Width Over Tires 2745.0 mm
Caterpillar 950 GC Medium Wheel Loaders Reviews
0.0
Overall
Based on 0 Reviews
Write Review
Frequently Asked Questions
The Caterpillar 950 GC Medium Wheel Loader is designed as a perfect combination of reliability and simplicity. It is suitable for tasks where durable performance is essential, making material handling easy and efficient every day for contractors.
The Caterpillar 950 GC features an engine with a bore of 105.0 mm and a displacement of 7.01 L, delivering a max gross power of 171.0 kW @ 2,000 rpm. It has a wheelbase of 3300.0 mm and operates at maximum speed of 34.0 km/h in forward gear.
Yes. The brakes comply with ISO 3450, while the ROPS/FOPS meets both ISO 3471 and ISO 3449 Level II standards. Additionally, the machine's static tipping load for a full 40° turn is documented as 10503.0 kg (rigid tires).
The Caterpillar 950 GC medium wheel loader can handle bucket capacities ranging from 2.9 m³ to 4.4 m³. These capacities allow it to manage various material handling requirements effectively.
MotorBazee provides an EMI Calculator feature to help estimate potential EMI payments for purchasing the Caterpillar 950 GC. Users can also find listings for used equipment and search for nearby dealers to aid in budgeting.
The machine has a wheelbase of 3300.0 mm and a ground clearance of 460.0 mm. Other dimensions include a maximum lift arm clearance of 3649.0 mm and a height to top of the ROPS/FOPS being 3458.0 mm.
