Caterpillar-986H

Price not available

Caterpillar 986H Large Wheel Loaders

Variants

Specifications of Caterpillar 986H Large Wheel Loaders

Engine

  • Bore 137.0 mm
  • Displacement 15.2 L
  • EEC 80/1269 305.0 kW
  • Emissions Tier 2, Tier 3 equivalent
  • Engine Model Cat® C15 ACERTâ„¢
  • Gross Power - SAE J1995 335.0 kW
  • ISO 14396 at Rated Speed 329.0 kW
  • ISO 9249 at Rated Speed (assumes standard ambient fan) 305.0 kW
  • Net Power 305.0 kW
  • Net Power - ISO 9249 305.0 kW
  • Peak Torque @ 1,200 rpm 2320.0 N·m
  • Rated Speed 1,800 rpm
  • SAE 1349 at Rated Speed (assumes standard ambient fan) 305.0 kW
  • SAE J1995 at Rated Speed 335.0 kW
  • Stroke 171.5 mm
  • Torque Rise 37.0 %

Transmission

  • Direct Drive - Forward 2 12.7 km/h
  • Direct Drive - Forward 3 22.0 km/h
  • Direct Drive - Forward 4 39.0 km/h
  • Direct Drive - Reverse 2 14.1 km/h
  • Direct Drive - Reverse 3 25.0 km/h
  • Forward 1 7.3 km/h
  • Forward 2 12.2 km/h
  • Reverse 1 7.6 km/h
  • Reverse 2 13.6 km/h
  • Transmission Type Cat planetary power shift

Service Refill Capacities

  • Axle Oil 356.0 L
  • Cooling Systems 90.0 L
  • Crankcase 34.0 L
  • Differentials and Final Drives - Front 186.0 L
  • Differentials and Final Drives - Rear 170.0 L
  • Fuel Tank 600.0 L
  • Hydraulic System (tank only) 125.0 L
  • Hydraulic System Factory Fill 330.0 L
  • Transmission 75.0 L

Operating Specifications

  • Bucket Capacity Range 5.3-7.6 m3 (7-10 yd3)
  • Cat Truck Match - High Lift 772
  • Cat Truck Match - Standard 770
  • Operating Weight 42225.0 kg
  • Operating Weight - High Lift 42943.0 kg
  • Operating Weight - Standard 42225.0 kg
  • Rated Payload - High Lift (Loose Material) 10.0 tonnes
  • Rated Payload - High Lift (Quarry Face) 9.5 tonnes
  • Rated Payload - Standard (Quarry Face) 10.0 tonnes

Axles

  • Front Fixed
  • Oscillation Angle ±12.5°
  • Rear Trunnion

Brakes

  • Brakes SAE J1473 OCT90, ISO 3450:1992

Buckets

  • Bucket Capacities 5.3-7.6 m3 (7-10 yd3)

HYDRAULIC SYSTEM - LIFT/TILT

  • Lift Cylinder - Bore 190.0 mm
  • Lift Cylinder - Stroke 1138.0 mm
  • Lift/Tilt System - Circuit Load Sense
  • Lift/Tilt System - Pump 2 × 110 cc variable displacement
  • Maximum Flow at 2,165 rpm 470.0 L/min
  • Relief Valve Setting - Lift/Tilt 27900.0 kPa
  • Tilt Cylinder - Bore 170.0 mm
  • Tilt Cylinder - Stroke 722.0 mm

HYDRAULIC SYSTEM - STEERING

  • Max Flow @ 2,284 rpm 200.0 L/min
  • Steering Cutoff Pressure 27600.0 kPa
  • Steering System - Circuit Load Sense
  • Steering System - Pump Piston, variable displacement
  • Total Steering Angle 70.0 Degrees

Hydraulic Cycle Time

  • Dump 3.0 Seconds
  • Lower 4.9 Seconds
  • Lower Float Down 4.3 Seconds
  • Rackback 4.5 Seconds
  • Raise 8.5 Seconds
  • Total Hydraulic Cycle Time 15.8 Seconds

You can help other customers

Have you used this car?

Write A Review

Caterpillar 986H Large Wheel Loaders Pictures

Select Equipment Dealers by Brand and City