Caterpillar-988H (Net Power-373.0 kW)

Price not available

Caterpillar 988H (Net Power-373.0 kW) Block Handler Arrangement

Variants

Specifications of Caterpillar 988H (Net Power-373.0 kW) Block Handler Arrangement

Engine

  • Bore 145.0 mm
  • Displacement 18.1 L
  • Engine Model Cat® C18 ACERT™
  • Flywheel Power 373.0 kW
  • Gross Power 414.0 kW
  • Gross Power – ISO 3046-2 388.0 kW
  • Net Power 373.0 kW
  • Net Power – EEC 80/1269 373.0 kW
  • Net Power – ISO 14396 397.0 kW
  • Net Power – ISO 9249 373.0 kW
  • Stroke 183.0 mm

Transmission

  • Converter Drive – Forward 1 6.04 km/h
  • Converter Drive – Forward 2 10.8 km/h
  • Converter Drive – Forward 3 19.23 km/h
  • Converter Drive – Forward 4 33.96 km/h
  • Converter Drive – Reverse 1 6.9 km/h
  • Converter Drive – Reverse 2 12.3 km/h
  • Converter Drive – Reverse 3 21.98 km/h
  • Direct Drive – Forward 1 6.0 km/h
  • Direct Drive – Forward 2 10.81 km/h
  • Direct Drive – Forward 3 19.24 km/h
  • Direct Drive – Forward 4 33.97 km/h
  • Direct Drive – Reverse 1 6.9 km/h
  • Direct Drive – Reverse 2 12.4 km/h
  • Direct Drive – Reverse 3 22.0 km/h

Service Refill Capacities

  • Cooling System 103.0 L
  • Crankcase 60.0 L
  • Differentials and Final Drives – Front 186.0 L
  • Differentials and Final Drives – Rear 186.0 L
  • Fuel Tank 712.0 L
  • Hydraulic System (factory fill) 470.0 L
  • Hydraulic System (tank only) 267.0 L
  • Transmission 70.0 L

Steering

  • Steering Meets SAE and ISO standards
  • Total Steering Angle 74.0 Degrees

Operating Specifications

  • Attachment Type Cat quick coupler and forks
  • Hinge Pin Height, Unloaded 4909.0 mm
  • Operating Weight 57276.0 kg
  • Overall Length 12152.0 mm
  • Tipping Load – Articulated 37° 33487.0 kg
  • Tipping Load – Straight 38119.0 kg
  • Turning Radius at SAE Carry 9426.0 mm

Axles

  • Front Fixed
  • Maximum Single-Wheel Rise and Fall 568.0 mm
  • Rear Oscillating ±13°

Brakes

  • Brakes Meet SAE ISO 3450:1996

Cab

  • Cab – ROPS/FOPS Meets SAE and ISO standards
  • Sound Performance Meets ANSI, SAE and ISO standards

Loader Hydraulic System

  • Cylinders, Double Acting: Lift, Bore and Stroke 235 × 911 mm (9.3 × 35.9 in)
  • Cylinders, Double Acting: Tilt, Bore and Stroke 235 × 1556 mm (9.3 × 61.3 in)
  • Pilot System, Gear-Type Pump Output at 2,010 rpm and 2500 kPa (363 psi) 76.0 L/min
  • Relief Valve Setting 35000.0 kPa
  • Relief Valve Setting (low idle) 2400.0 kPa

You can help other customers

Have you used this car?

Write A Review

Caterpillar 988H (Net Power-373.0 kW) Block Handler Arrangement Pictures

Select Equipment Dealers by Brand and City