Caterpillar 988H Steel Mill Arrangement Large Wheel Loaders
Ex-showroom Price
Price not available
Variants
Specifications of Caterpillar 988H Steel Mill Arrangement Large Wheel Loaders
Engine
- Bore 145.0 mm
- Displacement 18.1 L
- Engine Model Cat® C18 ACERT™
- Gross Power 414.0 kW
- Gross Power – ISO 3046-2 388.0 kW
- Net Power 373.0 kW
- Net Power – EEC 80/1269 373.0 kW
- Net Power – ISO 14396 393.0 kW
- Net Power – ISO 9249 373.0 kW
- Stroke 183.0 mm
Weights
- Operating Weight 58330.0 kg
Transmission
- Converter Drive – Forward 1 6.7 km/h
- Converter Drive – Forward 2 11.8 km/h
- Converter Drive – Forward 3 20.8 km/h
- Converter Drive – Forward 4 36.0 km/h
- Converter Drive – Reverse 1 7.6 km/h
- Converter Drive – Reverse 2 13.5 km/h
- Converter Drive – Reverse 3 23.7 km/h
- Direct Drive – Forward 1 Lock-up disabled
- Direct Drive – Forward 2 12.3 km/h
- Direct Drive – Forward 3 21.9 km/h
- Direct Drive – Forward 4 38.6 km/h
- Direct Drive – Reverse 1 7.9 km/h
- Direct Drive – Reverse 2 14.1 km/h
- Direct Drive – Reverse 3 25.1 km/h
Service Refill Capacities
- Cooling System 103.0 L
- Crankcase 60.0 L
- Differentials and Final Drives – Front 186.0 L
- Differentials and Final Drives – Rear 186.0 L
- Fuel Tank 712.0 L
- Hydraulic System (factory fill) 470.0 L
- Hydraulic System (tank only) 267.0 L
- Transmission 70.0 L
Steering
- Steering Meets SAE and ISO standards
- Total Steering Angle 74.0 Degrees
Operating Specifications
- Attachment Type 9 yd3 Rock Bucket
- Breakout Force – SAE Rated (3.88 m linkage) 49062.0 kg
- Breakout Force – SAE Rated (4.25 m linkage) 52971.0 kg
- Hinge Pin Height, Unloaded 4909.0 mm
- Operating Weight 58330.0 kg
- Overall Length 12410.0 mm
- Tipping Load – Articulated 43° 30210.0 kg
- Tipping Load – Straight 33861.0 kg
- Turning Radius at SAE Carry 8762.0 mm
Axles
- Front Fixed
- Maximum Single-Wheel Rise and Fall 568.0 mm
- Rear Oscillating ±13°
Brakes
- Brakes Meet SAE/ISO 3450:1996
Cab
- Cab – ROPS/FOPS Meets SAE and ISO standards
- Sound Performance Meets ANSI, SAE and ISO standards
Buckets
- Bucket Capacities 6.4-7.7 m3 (8.3-10 yd3)
Loader Hydraulic System
- Cylinder, Double Acting: Tilt, Bore and Stroke 220 × 911 mm (8.7 × 35.9 in)
- Cylinders, Double Acting: Lift, Bore and Stroke 220 × 1770 mm (8.7 × 69.7 in)
- Main Hydraulic System Output at 2010 rpm and 6900 kPa (1000 psi) 492.0 L/min
- Pilot System, Gear-Type Pump Output at 2010 rpm and 2500 kPa (363 psi) 76.0 L/min
- Relief Valve Setting 35000.0 kPa
- Relief Valve Setting (low idle) 2400.0 kPa
Select Equipment Dealers by Brand and City
Caterpillar 988H Steel Mill Arrangement Large Wheel Loaders Reviews
0.0
Overall
Based on 0 Reviews
Write Review