Caterpillar CL106 Load Haul Dumps
Ex-showroom Price
Price not available
Variants
Caterpillar CL106 Load Haul Dumps Truck Description
The Caterpillar CL106 Load Haul Dump (LHD) Machine is designed for underground mining. Its compact design allows it to move easily in narrow tunnels and load materials efficiently. With a strong build and high bucket capacity, it boosts underground productivity. Visit MotorBazee to check out its payload capacity and safety features to make your mining operations secure and effective.
Key Specifications of Caterpillar CL106 Load Haul Dumps Equipment
Calculate Caterpillar CL106 Load Haul Dumps Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar CL106 Load Haul Dumps
Weights
- Laden with Forks and 6 tonnes (6.61 tons) Load 27200.0 kg
- Unladen with Full Tanks and Bucket 21200.0 kg
Transmission
- Speeds, Forward and Reverse 4
- Type Power Shift with Forward/Reverse Modulation
Specifications
- Height 1600 mm (67 in )
- Load Capacity 6 tonnes (6.6 tons)
- Power Type Diesel, Turbocharged, and 4 Cycle
Wheels
- Make/Model 5 Piece (Heavy Duty)
ELECTRICAL SYSTEM
- Type Approved Flameproof
- Voltage 12.0 volts
CAPACITIES
- Bucket Payload up to 6000 kg (up to 13,227 lb)
- Maximum Braked Trailer Mass Consult Caterpillar
- RAS Forks, Maximum Payload 600 mm (23.6 in) Load from Fork Face up to 6000 kg (up to 13,227 lb)
ENGINE SPEEDS
- High Idle 2800.0 RPM
- Low Idle 800.0 RPM
START SYSTEM
- Starter Motor Type Air
INTAKE AIR CLEANER
- Intake Flame Trap Primary and Secondary
- Type Dry
EXHAUST CONDITIONER
- Aftertreatment Catalytic Exhaust Purifier
- Exhaust Filter Replaceable Element Except China
- Exhaust Flame Trap Replaceable China and RSA
- Make Caterpillar
- Type Flameproof Wet
TORQUE CONVERTER
- Type Mounted on Engine, Single Element
TIRES – STANDARD
- Inflation Media 1 Air
- Inflation Media 2 Air
- Load/Speed Rating Maximum 6 km/h (3.7 mph) when loaded 6 tonnes (6.6 tons)
- Ply Rating 1 Radial
- Ply Rating 2 Radial
- Size 1 17.5 × 25 L3
- Size 2 14.00 × 24 L3
ARTICULATION
- Degrees of Turn Either Side 43 Degree
OSCILLATION
- Degrees Up and Down from Horizontal 8 Degree
- Type Ball Bearing at Articulation
SEATING (DRIVER)
- Suspension Adjust Spring/Shock Absorber
- Type Cross-seated
CANOPY
- Type Cab to (MDG1)
LIGHTS
- Number/Location 2 Front, 2 Rear
- Type Flameproof
ALTERNATOR
- Drive Hydraulic
- Type Flameproof
PNEUMATIC SYSTEM
- Air Receiver Volume 80.0 L
- Compressor Type Piston Engine Gear Driven
- Governed Pressure 830.0 kPa
- Relief Pressure 896.0 kPa
SERVICE CAPACITIES
- Axle Oil (Each) 18.0 L
- Converter Oil 40.0 L
- Engine Cooling System Water 72.0 L
- Engine Crankcase Oil (with Filter) 22.0 L
- Fuel Tank 150.0 L
- Hydraulic Tank 250.0 L
- Main Air Receiver 80.0 L
- Transmission 40.0 L
- Water Make Up Tank 300.0 L
GRADE ABILITY
- Front to Rear 1: 4
- Side to Side (Empty) RAS Raised 300 mm (0.98 ft) from Floor 1:4
- Side to Side (Laden Bucket Load Fully Raised) 1:8
STANDARD EJECTOR BUCKET
- Heaped Capacity (SAE) 2.7 m3
- Struck Capacity 2.25 m3
HYDRAULIC FILTRATION
- Auxiliary System Pressure 10 Micron
- Bucket/PTO System Pressure 10 Micron
- Common Return Tank Mounted, 25 Micron, Replaceable with Bypass
- Steer/Brake System Pressure 10 Micron
ENGINE (6 CYLINDER)
- Cooling Fan Hydraulic Driven Fan
- Cooling System Water Based Radiator
- Displacement 6.45 L
- Engine Make/Model MWM
- Maximum Power Tested 117 kW (157 hp) @ 2,200 rpm
- Maximum Torque Tested 585 N·m (431 lb-ft) @ 1,400 rpm
- Type Diesel, Turbocharged, and 4 Cycle
AXLES (FRONT/REAR)
- Differential Type Bevel Gear and Pinion
- Type Inboard Planetary
VEHICLE SPEEDS (MAXIMUM SPEEDS ARE LIMITED TO THE LOAD BEING CARRIED 2ND GEAR MAXIMUM.)
- 1st Gear – Maximum 4.0 km/h
- 2nd Gear – Maximum 8.0 km/h
- 3rd Gear – Maximum 14.0 km/h
- 4th Gear – Maximum 24.0 km/h
MAXIMUM TRACTIVE EFFORT
- Reference Refer to engineering for information dependant on the applications.
Caterpillar CL106 Load Haul Dumps Reviews
0.0
Overall
Based on 0 Reviews
Write Review
Frequently Asked Questions
The Caterpillar CL106 Load Dump Machine is designed specifically for underground mining operations. Its compact design enables it to move easily in narrow tunnels while efficiently loading materials, significantly boosting overall underground productivity.
Key specifications include a load capacity of up to 6 tonnes (or 6,600 kg) and standard ejector bucket capacities. The unit features advanced components such as Turbocharged Diesel engines, Electric systems like Flameproof Voltage 12.0 volts, and comprehensive service capacities for maintenance.
The machine includes specifications for both articulation (43 Degrees on either side) and oscillation (8 Degree Up and Down from Horizontal), suggesting versatile maneuverability. It also features Grade ability measurements, such as a 1:4 Side to Side when laden with a bucket load fully raised.
The machine has a defined Bucket Payload up to 6000 kg (or 13,227 lb). Additionally, it can handle loads from the Fork Face up to 6000 kg (or 13,227 lb), providing flexibility in material handling.
The required service capacities are detailed for various fluids. These include Axle Oil (18.0 L each), Engine Cooling System Water (72.0 L), Fuel Tank (150.0 L), and Hydraulic Tank (250.0 L). Specific components like the main air receiver and transmission oil are also listed.
The maximum speeds are limited by the load being carried and refer to 2nd Gear Maximum for general operation. For reference, other gear specifications include a maximum of 4.0 km/h in 1st Gear, 8.0 km/h in 2nd Gear, 14.0 km/h in 3rd Gear, and 24.0 km/h in 4th Gear.
