Caterpillar CL115 Load Haul Dumps

Specifications of Caterpillar CL115 Load Haul Dumps

Weights

• Unladen with Full Tanks and Bucket 24490.0 kg

Transmission

• Make/Model Dana 32000 Series
• Speeds, Forward and Reverse 8
• Type Power Shift with Forward/Reverse

Specifications

• Articulation 45.0 Degrees
• Brakes SAHR
• Height 1499 mm (59 in )
• Length 7696.0 mm
• Load Capacity 13.5 tonnes (15 tons)
• Optional Equipment RAS attachments
• Oscillation 11.0 Degrees
• Power Type Diesel
• RAS/QDS Attachments yes
• Transmission 4 speed transmission with electronic option
• Unladen Weight 23.4 tonnes
• Width (nominal) 2362.0 mm

Hydraulic System

• Auxiliary System Closed Center, Pressure Comp
• Bucket/PTO System Closed Center, Pressure Comp
• Steer/Brake System Closed Center, Pressure Comp

Dimensions (Approximate)

• Entry Width 4004.3 mm
• Height – Ground Clearance 1 325.7 mm
• Height – Ground Clearance 2 464.3 mm
• Height – Top of Hood 1378.2 mm
• Height – Top of ROPS 1798.8 mm
• Inner Turning Radius 3432.5 mm
• Length – Front Axle to Bucket 3099.1 mm
• Length – Overall with Bucket 9620.8 mm
• Length – Rear Axle to Bumper 2947.9 mm
• Length – Wheel Base 3573.8 mm
• Outer Turning Radius 6210.7 mm
• Width 2171.7 mm
• Width – Over Bucket 2409.4 mm

Wheels

• Make/Model 3 Piece (Heavy Duty)

ELECTRICAL SYSTEM

• Polarity Floating
• Type Approved Flameproof
• Voltage 12.0 volts

ENGINE SPEEDS

• High Idle 2300.0 RPM
• Low Idle 650.0 RPM

START SYSTEM

• Starter Motor Type Air

INTAKE AIR CLEANER

• Intake Dual Element Type Primary and Secondary
• Type Dry

EXHAUST CONDITIONER

• Aftertreatment Catalytic Exhaust Purifier
• DPM Control Disposable Filter 97% Eff.
• Make Caterpillar
• Type Ultra Flow Dry Scrubber

TORQUE CONVERTER

• Make/Model Dana/C270
• Type Mounted on Engine, Single Element

TIRES – STANDARD

• Size: 14 × R24 L3 – Inflation Media Air
• Size: 14 × R24 L3 – Load/Speed Rating Per Manufacturer’s Specifications
• Size: 14 × R24 L3 – Ply Rating Radial
• Size: 17.5 × R25 L3 – Inflation Media Air
• Size: 17.5 × R25 L3 – Load Per Manufacturer’s Specifications
• Size: 17.5 × R25 L3 – Ply Rating Radial

OSCILLATION

• Degrees Up and Down from Horizontal 8 Degree
• Type Ball Bearing at Articulation

SEATING (DRIVER)

• Suspension Adjust Spring/Shock Absorb
• Type Adjustable Cross-Seated

CANOPY

• Note Cert. to MSHA req. or opt. ROPS/FOPS to (MDG1)
• Type Adjustable Cab

LIGHTS

• Number/Location 2 Front, 2 Rear
• Type VICTOR

ALTERNATOR

• Drive Hydraulic
• Type Caterpillar Flameproof

PNEUMATIC SYSTEM

• Air Receiver Volume 41.6 L
• Compressor Type Piston Engine Gear Driven
• Governed Pressure 827.4 kPa
• Relief Pressure 896.3 kPa

SERVICE CAPACITIES

• Fuel Tank 151.0 L
• Hydraulic Tank 250.0 L

GRADE ABILITY

• Front to Rear 1:4
• Side to Side (Empty) RAS Raised 300 mm (11.8 in) from Floor 1: 4
• Side to Side (Laden Bucket Load Fully Raised) 1:8

STANDARD EJECTOR BUCKET

• Heaped Capacity (SAE) 2.7 m3
• Struck Capacity 2.3 m3

HYDRAULIC FILTRATION

• Auxiliary 34 474 kPa (5,000 psi)/5 Micron
• Common Return 689.5 kPa (100 psi)/5 Micron
• Main Hydraulic 34 474 kPa (5,000 psi)/5 Micron

AXLES (FRONT/REAR)

• Differential Type Bevel Gear and Pinion
• Make/Model Kessler 82
• Type Outboard Planetary

MAXIMUM TRACTIVE EFFORT

• Reference Refer to Engineering for Information Dependant on the Applications.

VEHICLE SPEEDS

• 1st Gear – Maximum 1.9 km/h
• 2nd Gear – Maximum 4.2 km/h
• 3rd Gear – Maximum 7.1 km/h
• 4th Gear – Maximum 11.1 km/h
• 5th Gear – Maximum 4.8 km/h
• 6th Gear – Maximum 9.8 km/h
• 7th Gear – Maximum 16.7 km/h
• 8th Gear – Maximum 25.9 km/h

STEERING SYSTEM

• Actuation HRO Control
• Control Valve Closed Center

CAPACITIES – DEPENDING ON MODEL

• Bucket Payload – Maximum (RAS Forks, Maximum Payload 609.6 mm [24 in] load from fork face) 13608.0 kg
• Maximum Braked Trailer Mass – Consult Caterpillar TBS Required for Combinations

ENGINE (4 CYLINDER)

• Cooling Fan Hydraulic Driven Fan
• Cooling System Water Based Radiator
• Displacement 4.76 L
• Engine Make/Model Deutz 1013FC
• Maximum Power Tested 112 kW @ 2,300 rpm (150 hp @ 2,300 rpm)
• Maximum Torque Tested 651.0 N·m
• Note Caterpillar, MSHA Approval # 07-080001
• Type Diesel, Turbocharged, and 4 Cycle

MAIN HYDRAULIC/STEERING PUMP

• Standard Pump Output @ 2,250 rpm 129.0 L/min
• Type Pressure Compensated Piston

CYLINDERS

• Counterbalance Load Lock Valves Lift and Tilt
• Rods Hard Chromed
• Type Double Acting

ACCUMULATOR BRAKES

• Operating Precharge Pressure – Nitrogen 6205.0 kPa
• Quantity × Capacity 1900 cc (116 in3)
• Type Piston

BUCKET SYSTEM

• Actuation Hydraulic Pilot
• Control Valve Closed Center