Caterpillar CL215 Load Haul Dumps

Specifications of Caterpillar CL215 Load Haul Dumps

Engine

• Cooling Fan Hydraulic Driven Fan
• Cooling System Water Based Radiator
• Displacement 7.2 L
• Engine Make/Model Cat 3126
• Maximum Power 172 kW (230 hp) @ 2,200 rpm
• Maximum Torque 720 N·m (531 lb-ft) @ 1,400 rpm
• Type Diesel, Turbocharged, 4 Cycle

Weights

• Maximum Laden 44000.0 kg
• Operating with Bucket Only 29000.0 kg
• Operating without Bucket 26500.0 kg

Transmission

• Speeds, Forward and Reverse 4
• Type Power Shift with Forward/Reverse

Specifications

• Height 2056 mm/80.9 in (and above)
• Load Capacity 15 tonnes/16.5 tons (max)
• Power Type Diesel

Wheels

• Make/Model 5 Pieces ( Heavy Duty)

ELECTRICAL SYSTEM

• Polarity Floating Chassis
• Type Approved Flameproof
• Voltage 12.0 volts

CAPACITIES

• Bucket Payload 12000.0 kg
• Maximum Braked Trailer Mass Consult Caterpillar
• Maximum Un-braked Trailer Mass 15000.0 kg
• RAS Belt Reeler 12000.0 kg
• RAS Fixed Jib Maximum Payload 10000.0 kg
• RAS Forks, Maximum Payload 600 mm (23.6 in) Load from Fork Face 15000.0 kg
• RAS Slewing Jib, Maximum Payload 8000.0 kg

ENGINE SPEEDS

• Governed 2600.0 RPM
• High Idle 2700.0 RPM
• Low Idle 800.0 RPM

FUEL CONSUMPTION

• At Full Power 37.5 L/hr
• Average Mine Duty 8-30 L/hr (2.1-7.9 gal/hr)

START SYSTEM

• Starter Motor Type Air Turbine Type

INTAKE AIR CLEANER

• Intake Flame Trap Spiral Wound Type
• Type/Make Dry Dual Element/Caterpillar

EXHAUST CONDITIONER

• Aftertreatment Catalytic Exhaust Purifier
• Exhaust Filter Replaceable Element Except China
• Exhaust Flame Trap Replaceable China and RSA
• Make Caterpillar
• Type Flameproof Wet

TIRES – STANDARD

• Inflation Media Air
• Inflation Pressure – Front 760.0 kPa
• Inflation Pressure – Rear 760.0 kPa
• Ply Rating Radial
• Size 20.5 × R25
• Type XKA Tires

ARTICULATION

• Degrees of Turn Either Side 43 Degree

OSCILLATION

• Degrees Up and Down from Horizontal 7.5 Degree

SEATING (DRIVER)

• Type Cross- seated

CANOPY

• ROPS/FOPS Optional
• Type Protective Device MDG1

LIGHTS

• Number/Location 2 Front, 2 Rear; Approved Flameproof

ALTERNATOR

• Drive Hydraulic
• Type Approved Flameproof

PNEUMATIC SYSTEM

• Air Flow 0.340 m3/min (12 ft3/min) @ 1,500 rpm
• Air Receiver Volume 80.0 L
• Compressor Type Piston Engine Gear Driven
• Governed Pressure 800.0 kPa
• Relief Pressure 830.0 kPa

SERVICE CAPACITIES

• Axle Oil (Each) 71.0 L
• Engine Cooling System Water 72.0 L
• Engine Crankcase Oil (with Filter) 22.0 L
• Fuel Tank 300.0 L
• Hydraulic Tank 300.0 L
• Main Air Receiver 80.0 L
• Transmission/Converter Oil 40.0 L
• Water Make Up Tank 450.0 L

GRADE ABILITY

• Front to Rear 1:4
• Side to Side 1: 8
• Side to Side (Empty) 1: 4

STANDARD EJECTOR BUCKET

• Heaped Capacity (SAE) 4.5 m3
• Struck Capacity 3.5 m3

HYDRAULIC FILTRATION

• Bucket System Return 10 Micron; Replaceable with Bypass
• Steer/Brake System Pressure 10 Micron; Replaceable with Bypass

VEHICLE SPEEDS

• 1st Gear 3.1 km/h
• 2nd Gear 7.4 km/h
• 3rd Gear 13.0 km/h
• 4th Gear 23.0 km/h

AXLES STANDARD

• Front Axle Fixed
• Rear Axle Trunnion Mount
• Type Outboard Planetary

SHUTDOWN SYSTEM

• Optional Shutdowns • High Methane • Low Hydraulic Oil • Exhaust Scrubber Temperature
• Standard Shutdowns • Low Engine Oil Pressure • Exhaust Temperature • Engine Coolant Level • Engine Coolant Temperature
• Standard Shutdowns (cont'd.) • Turbo Temperature • Scrubber Level 1 • Scrubber Level 2
• System Type DCS Electronic; Intrinsically Safe Approved