Caterpillar CL215B Load Haul Dumps

Specifications of Caterpillar CL215B Load Haul Dumps

Weights

• Maximum Laden 44000.0 kg
• Operating with Bucket Only 29000.0 kg
• Operating without Bucket 26500.0 kg

Transmission

• Speeds, Forward and Reverse 4
• Type Power Shift with Forward/Reverse

Specifications

• Height 2056-2182 mm (80.9-85.9 in)
• Load Capacity 15 tonnes (16.5 tons)
• Power Type Diesel

Wheels

• Make/Model 5 Pieces (Heavy Duty)

ELECTRICAL SYSTEM

• Polarity Floating Chassis
• Type Approved Flameproof
• Voltage 12.0 volts

CAPACITIES

• Bucket Payload 12000.0 kg
• Maximum Braked Trailer Mass Consult Caterpillar
• Maximum Un-braked Trailer Mass 15000.0 kg
• RAS Belt Reeler 12000.0 kg
• RAS Fixed Jib Maximum Payload 10000.0 kg
• RAS Forks, Maximum Payload 600 mm (23.6 in) Load from Fork Face 15000.0 kg
• RAS Slewing Jib, Maximum Payload 8000.0 kg

ENGINE SPEEDS

• High Idle 2300.0 RPM
• Low Idle 800.0 RPM

FUEL CONSUMPTION

• At Full Power 39.4 L/hr
• Average Mine Duty 20-40 L/hr (5.3-10.5 gal/hr)

START SYSTEM

• Starter Motor Type Air Turbine Type

INTAKE AIR CLEANER

• Intake Flame Trap Spiral Wound Type
• Type/Make Dry Dual Element/Caterpillar

EXHAUST CONDITIONER

• Aftertreatment Catalytic Exhaust Purifier
• Exhaust Filter Replaceable Element Except China
• Exhaust Flame Trap Replaceable China and RSA
• Make Caterpillar
• Type Flameproof Wet

TIRES – STANDARD

• Inflation Media Air
• Inflation Pressure 800.0 kPa
• Ply Rating Radial
• Size 20.5 × R25
• Type XKA Tires

ARTICULATION

• Degrees of Turn Either Side 43 Degree

OSCILLATION

• Degrees Up and Down from Horizontal 7.5 Degree

SEATING (DRIVER)

• Type Cross-seated

CANOPY

• ROPS/FOPS Optional
• Type Protective Device MDG1

LIGHTS

• Number/Location 2 Front, 2 Rear; Approved Flameproof

ALTERNATOR

• Drive Hydraulic
• Type Approved Flameproof

PNEUMATIC SYSTEM

• Air Flow 0.340 m3/min (12 ft3/min) @ 1,500 rpm
• Compressor Type Piston Engine Gear Driven
• Governed Pressure 800.0 kPa
• Relief Pressure 830.0 kPa

SERVICE CAPACITIES

• Axle Oil (Each) 71.0 L
• Engine Cooling System Water 72.0 L
• Engine Crankcase Oil (with Filter) 25.0 L
• Fuel Tank 300.0 L
• Hydraulic Tank 300.0 L
• Main Air Receiver 150.0 L
• Transmission/Converter Oil 40.0 L
• Water Make Up Tank 450.0 L

GRADE ABILITY

• Front to Rear 1:4
• Side to Side 1:8
• Side to Side (Empty) 1:4

STANDARD EJECTOR BUCKET

• Heaped Capacity (SAE) 4.5 m3
• Struck Capacity 3.5 m3

HYDRAULIC FILTRATION

• Bucket System Return 10 Micron; Replaceable with Bypass
• Steer/Brake System Pressure 10 Micron; Replaceable with Bypass

ENGINE (6 CYLINDER)

• Cooling Fan Hydraulic Driven Fan
• Cooling System Coolant Based Radiator
• Displacement 7.2 L
• Engine Make/Model Cat C7
• Maximum Power Gross 171.5 kW (230 hp) @ 2,200 rpm
• Maximum Torque Tested 895 N·m (660 lb-ft) @ 1,700 rpm
• Radiator Position Vertical Rear
• Type Diesel, Turbocharged

VEHICLE SPEEDS

• 1st Gear 2.6 km/h
• 2nd Gear 6.3 km/h
• 3rd Gear 11.0 km/h
• 4th Gear 19.4 km/ h

AXLES STANDARD

• Front Axle Fixed
• Rear Axle Trunnion Mount
• Type Outboard Planetary

SHUTDOWN SYSTEM

• Optional Shutdowns • High Methane • Low Hydraulic Oil • Exhaust Scrubber Temperature
• Standard Shutdowns • Low Engine Oil Pressure • Exhaust Temperature • Engine Coolant Level • Engine Coolant Temperature
• Standard Shutdowns (cont'd.) • Turbo Temperature • Scrubber Level 1 • Scrubber Level 2
• System Type DCS Electronic; Intrinsically Safe Approved