Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base
Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base Equipment Description
Experience the most intuitive finish grading tractor with the new Cat® D6K2. Redesigned to help you meet your goals, it improves your fuel efficiency and productivity. It is an excellent platform for the integrated AccuGrade grade control system, which will help you get to target grade faster, with fewer passes and less manpower. Stable Blade Control senses ground conditions and works with the operator to produce the desired grade, allowing better finish grading results at higher speed, with less effort. The new undercarriage design improves stability to further enhance finish grading performance. The D6K2 helps you get more done with less fuel. Choose the D6K2 for best-in-class productivity with the lowest owning and operating costs in his size class. Sharper, from the first cut to finish grade, the D6K2 sets the standard.
Key Specifications of Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base Equipment
Calculate Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base Monthly EMI
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base
Engine
- Bore 4.13 in
- Displacement 402.75 in3
- Emissions U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4
- Engine Model Cat® C6.6 ACERT™
- Engine Power – ISO 14396 155.0 hp
- Engine Power – ISO 14396 (DIN) 157.0 hp
- Flywheel Power 130.0 hp
- Gross Power – SAE J1995 158.0 hp
- Net Power – EU 80/1269/EEC 130.0 hp
- Net Power – ISO 9249 130.0 hp
- Net Power – ISO 9249 (DIN) 132.0 hp
- Net Power – SAE J1349 128.0 hp
- Stroke 4.99 in
Weights
- Operating Weight 29346.0 lb
- Operating Weight – LGP 30750.0 lb
- Operating Weight – XL 29346.0 lb
- Shipping Weight – LGP 30353.0 lb
- Shipping Weight – XL 28949.0 lb
- Weight – LGP 30144.0 lb
- Weight – XL 28740.0 lb
Service Refill Capacities
- Cooling System 8.58 gal
- Engine Crankcase 4.35 gal
- Final Drives (each LGP) 6.0 gal
- Final Drives (each XL) 4.0 gal
- Fuel Tank 77.9 gal
- Hydraulic Tank 15.3 gal
Standards
- Brakes Standards
- Cab Standards
- ROPS/FOPS Standards
Blades
- Blade Type VPAT, VPAT Foldable*
- LGP, VPAT – Blade Capacity 4.38 yd3
- LGP, VPAT – Blade Width over End Bits 12.0 ft
- XL, VPAT – Blade Capacity 4.01 yd3
- XL, VPAT – Blade Width over End Bits 10.5 ft
Undercarriage
- Ground Contact Area – LGP 6200.0 in2
- Ground Contact Area – XL 4650.0 in2
- Ground Pressure – LGP (ISO 16754) 4.45 psi
- Ground Pressure – XL (ISO 16754) 5.77 psi
- Grouser Height 1.9 in
- Shoes/Side – LGP 40
- Shoes/Side – XL 40
- Track Gauge – LGP 79.0 in
- Track Gauge – XL 70.0 in
- Track on Ground – LGP 104.0 in
- Track on Ground – XL 104.0 in
- Track Rollers/Side – LGP 8
- Track Rollers/Side – XL 8
- Width of Shoe – LGP 30.0 in
- Width of Shoe – XL 22.0 in
Ripper
- Beam Cross Section 165 × 211 mm (6.5 × 8.3 in)
- Each Additional Shank 75.0 lb
- Maximum Penetration – XL & LGP 14.2 in
- Maximum Penetration Force – LGP 10138.0 lb
- Maximum Penetration Force – XL 9480.0 lb
- Maximum Pry-out Force – LGP 37480.0 lb
- Maximum Pry-out Force – XL 37480.0 lb
- Number of Pockets 3
- Overall Beam Width 76.8 in
- Pocket Spacing 35.3 in
- Shank Gauge 70.6 in
- Shank Section 58.5 × 138 mm (2.3 × 5.4 in)
- Type Fixed Parallelogram
- Weight – With One Shank 1863.0 lb
Winch
- Cable Ferrule Size (Length) 2.63 in
- Cable Ferrule Size (O.D.) 2.13 in
- Drum Capacity (Optional Rope) 220.0 in
- Drum Capacity (Recommended Rope) 306.0 in
- Drum diameter 8.0 in
- Drum width 11.0 in
- Flange Diameter 18.0 in
- Maximum Bare Drum – Line Pull 50000.0 lb
- Maximum Bare Drum – Line Speed 124.0 ft/min
- Maximum Full Drum – Line Pull 26000.0 lb
- Maximum Full Drum – Line Speed 230.0 ft/min
- Optional Cable Size 0.87 in
- Rope Diameter (recommended) 0.75 in
- Weight* 2000.0 lb
- Winch and Bracket Length 33.2 in
- Winch Case – Width 35.6 in
- Winch Drive Hydrostatic
- Winch Model PA50
Transmission – Travel Speed
- Forward 0-10 km/h (0-6.2 mph)
- Reverse 0-10 km/h (0-6.2 mph)
- Transmission Type Hydrostatic
Sustainability
- Engine Emissions Fully complies with U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 emission standards
- Sound Levels – Average Exterior Sound Pressure Level 79 dB(A) (SAE J88:2006)
- Sound Levels – Dynamic Operator Sound Pressure Level (LpA)* 78 dB(A) (ISO 6396:2008)
- Sound Levels – Maximum Sound Power Level 109 dB(A) (2000/14/EC)
- Vibration Levels – Maximum Hand/Arm** 2.5 m/s2 (ISO 5349:2001)
- Vibration Levels – Maximum Whole Body 0.5 m/s2 (ISO/TR 25398:2006)
- Vibration Levels – Seat Transmissibility Factor <0.7 ISO 7096:2000 – spectral class EM6
Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) Base Reviews
0.0
Overall
Based on 0 Reviews
