Caterpillar D6T WH (Tier 4 Interim/Stage IIIB) Base

Specifications of Caterpillar D6T WH (Tier 4 Interim/Stage IIIB) Base

Engine

• Bore 4.5 in
• Displacement 567.0 in3
• Emissions U.S. Tier 4 Interim/EU Stage IIIB
• Engine Model Cat® C9.3 ACERT™
• Engine Power – ISO 14396 227.0 hp
• Engine Power – ISO 14396 (DIN) 230.0 hp
• Flywheel Power 205.0 hp
• Gross Power – SAE J1995 229.0 hp
• Net Power – 80/1269/EEC 205.0 hp
• Net Power – ISO 9249 205.0 hp
• Net Power – ISO 9249 (DIN) 208.0 hp
• Net Power – SAE J1349 205.0 hp
• Stroke 5.9 in

Weights

• Operating Weight 54791.0 lb
• Operating Weight – LGP A 57066.0 lb
• Operating Weight – LGP S 54791.0 lb
• Operating Weight – LGP VPAT 59457.0 lb
• Operating Weight – XL A 51586.0 lb
• Operating Weight – XL SU 51121.0 lb
• Operating Weight – XW A 53900.0 lb
• Operating Weight – XW SU 53286.0 lb
• Operating Weight – XW VPAT 58397.0 lb
• Shipping Weight – LGP A 48365.0 lb
• Shipping Weight – LGP S 48365.0 lb
• Shipping Weight – LGP VPAT 52147.0 lb
• Shipping Weight – XL A 44084.0 lb
• Shipping Weight – XL SU 44084.0 lb
• Shipping Weight – XW A 46191.0 lb
• Shipping Weight – XW SU 46191.0 lb
• Shipping Weight – XW VPAT 51095.0 lb

Transmission

• Drawbar Pull - 2.5 Forward 46410.0 lb
• Drawbar Pull – 3 Forward 25360.0 lb
• Drawbar Pull - 3.5 Forward 25360.0 lb
• 1.5 Forward 2.3 mph
• 1.5 Reverse 3.0 mph
• 2.0 Forward 3.2 mph
• 2.0 Reverse 4.1 mph
• 2.5 Forward 4.1 mph
• 2.5 Reverse 5.2 mph
• 3.0 Forward 5.3 mph
• 3.0 Reverse 5.3 mph
• 3.5 Forward 7.1 mph
• 3.5 Reverse* 7.1 mph
• Drawbar Pull - 1.5 Forward 79910.0 lb
• Drawbar Pull - 2.0 Forward 46410.0 lb

Service Refill Capacities

• Cooling System 17.0 gal
• Engine Crankcase 6.5 gal
• Final Drives (each) 3.6 gal
• Fuel Tank 112.0 gal
• Hydraulic Tank 17.3 gal
• Pivot Shaft Compartment 1.3 gal
• Powertrain 39.1 gal
• Roller Frames (each) 6.6 gal

Standards

• Brakes Brakes meet the International Standard ISO 10265:2008.
• Cab Meets appropriate standards as listed below.
• ROPS/FOPS ROPS meets criteria ISO 3471:1994, 2008 FOPS meets ISO 3449:1992, 2005 Level II

Blades

• Capacity – LGP S-Blade 12.3 yd3
• Capacity – LGP VPAT-Blade 5.5 yd3
• Capacity – XL SU-Blade 14.3 yd3
• Capacity – XW SU-Blade 14.3 yd3
• Capacity – XW VPAT-Blade 6.7 yd3
• Width – LGP S-Blade 13.3 ft
• Width – LGP VPAT-Blade 13.7 ft
• Width – XL SU-Blade 10.7 ft
• Width – XW SU-Blade 11.7 ft
• Width – XW VPAT-Blade 13.7 ft

Undercarriage

• Carrier Rollers/Side 1
• Ground Clearance 15.0 in
• Ground Contact Area – LGP 9223.0 in2
• Ground Contact Area – LGP VPAT 7905.0 in2
• Ground Contact Area – XL 4929.0 in2
• Ground Contact Area – XW 6680.0 in2
• Ground Contact Area – XW VPAT 6246.0 in2
• Ground Pressure – LGP 4.86 psi
• Ground Pressure – LGP VPAT 6.2 psi
• Ground Pressure – XL 8.3 psi
• Ground Pressure – XW 6.4 psi
• Ground Pressure – XW VPAT 7.5 psi
• Grouser Height 2.6 in
• Oscillation at Front Idler – LGP/LGP VPAT 4.6 in
• Oscillation at Front Idler – XL/XW VPAT 4.0 in
• Oscillation at Front Idler – XW 3.9 in
• Pitch 8.0 in
• Shoe Type Moderate Service
• Shoes/Side – LGP 45
• Shoes/Side – XL/XW 41
• Track Gauge – XL 74.0 in
• Track Gauge – XW 80.0 in
• Track Gauge – XW VPAT/LGP/LGP VPAT 90.0 in
• Track on Ground – LGP 8
• Track on Ground – XL/XW 7
• Track Rollers/Side – LGP 128.0 in
• Track Rollers/Side – XL/XW 112.0 in
• Width of Shoe – LGP 36.0 in
• Width of Shoe – LGP VPAT 31.0 in
• Width of Shoe – XL 22.0 in
• Width of Shoe – XW 30.0 in
• Width of Shoe – XW VPAT 28.0 in

Ripper

• Weight – Each Additional Shank 163.0 lb
• Weight – With One Shank 3606.0 lb
• Beam Cross Section 219 × 254 mm (8.8 × 10 in)
• Maximum Clearance Raised (under tip, pinned in bottom hole) 20.2 in
• Maximum Penetration 18.0 in
• Maximum Penetration Force 14557.0 lb
• Number of Pockets 3
• Overall Beam Width 87.0 in
• Pocket Spacing 39.4 in
• Pryout Force 20137.0 lb
• Ramp Angle 26.0 Degrees
• Shank Gauge 78.8 in
• Shank Section 74 mm × 175 mm (2.9 in × 6.9 in)
• Type Fixed Parallelogram

Winch

• Cable Ferrule Size (O.D. × Length) 54 mm × 67 mm (2.1 in × 2.6 in)
• Drum Capacity – 22 mm (0.88 in) 281.0 ft
• Drum Capacity – 25 mm (1.0 in) 218.0 ft
• Drum diameter 10.0 in
• Drum width 12.4 in
• Flange Diameter 19.9 in
• Increased Tractor Length – LGP 14.4 in
• Increased Tractor Length – XL/XW 20.4 in
• Maximum Bare Drum – Line Pull 89800.0 lb
• Maximum Bare Drum – Line Speed 130.0 ft/min
• Maximum Full Drum – Line Pull 76300.0 lb
• Maximum Full Drum – Line Speed 224.0 ft/min
• Oil Capacity 17.8 gal
• Overall width 38.4 in
• Rope Diameter (recommended) 0.88 in
• Weight 2652.0 lb
• Winch and Bracket Length 47.8 in
• Winch Case – Length 35.5 in
• Winch Case – Width 34.3 in
• Winch Drive Mechanical
• Winch Model PA56
• Control Electric

Hydraulic Controls - Pump

• Angle Cylinder Flow – VPAT 45.0 gal/min
• Lift Cylinder Flow 50.0 gal/min
• Pump Output – Fan 25.0 gal/min
• Pump Output – Implement 54.0 gal/min
• Pump Output – Steering 52.0 gal/min
• Ripper Cylinder Flow 2135.0 RPM
• RPM at Rated Engine Speed – Fan 2135.0 RPM
• RPM at Rated Engine Speed – Implement 2854.0 RPM
• RPM at Rated Engine Speed – Steering 50.0 gal/min
• Tilt Cylinder Flow 29.0 gal/min

Hydraulic Controls - Main Relief Valve

• Pressure Setting – Implement – Non-VPAT 3150.0 psi
• Pressure Setting – Implement – VPAT 3540.0 psi

Hydraulic Controls - Maximum Operating Pressure

• Bulldozer – Angle – VPAT 3125.0 psi
• Bulldozer – Lift – Non-VPAT 2800.0 psi
• Bulldozer – Lift – VPAT 3125.0 psi
• Bulldozer – Tilt – Non-VPAT 2800.0 psi
• Bulldozer – Tilt – VPAT 3125.0 psi
• Ripper – Lift – Non-VPAT 2800.0 psi
• Ripper – Lift – VPAT 3125.0 psi
• Steering 5800.0 psi

Drive Train

• Type Mechanical