Caterpillar D8T (Tier 4 Interim/Stage IIIB) Base
Ex-showroom Price
Price not available
Variants
Caterpillar D8T (Tier 4 Interim/Stage IIIB) Base Truck Description
The Caterpillar D8T Tier 4 Interim Stage IIIB Base dozer is a reliable, older yet trusted model, known for its exceptional performance and efficiency. It’s designed to work continuously in tough conditions. Its cooling system and fuel management keep it running smoothly even in high temperatures. Visit MotorBazee to check its technical specifications and availability, and continue relying on this trusted workhorse.
Key Specifications of Caterpillar D8T (Tier 4 Interim/Stage IIIB) Base Equipment
Calculate Caterpillar D8T (Tier 4 Interim/Stage IIIB) Base Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar D8T (Tier 4 Interim/Stage IIIB) Base
Engine
- Bore 5.4 in
- Displacement 928.0 in3
- Engine Model Cat® C15 ACERT™
- Engine Power (Maximum) – ISO 14396 359.0 hp
- Engine Power (Maximum) – ISO 14396 (DIN) 364.0 hp
- Engine Power (Maximum) – SAE J1995 363.0 hp
- Flywheel Power 317.0 hp
- Net Power (Maximum) – ISO 9249/SAE J1349 333.0 hp
- Net Power (Maximum) – ISO 9249/SAE J1349 (DIN) 338.0 hp
- Net Power (Rated) – ISO 9249/SAE J1349 317.0 hp
- Net Power (Rated) – ISO 9249/SAE J1349 (DIN) 322.0 hp
- Stroke 6.75 in
Weights
- Operating Weight 87733.0 lb
- Operating Weight – LGP 83324.0 lb
- Operating Weight – Standard 87733.0 lb
- Shipping Weight – LGP 74075.0 lb
- Shipping Weight – Standard SU Blade 67219.0 lb
Transmission
- Drawbar Pull – 1 Forward 139.0 lbf
- Drawbar Pull – 2 Forward 76.0 lbf
- Drawbar Pull – 3 Forward 42.0 lbf
- Forward 1 2.1 mph
- Forward 2 3.8 mph
- Forward 3 6.6 mph
- Reverse 1 2.8 mph
- Reverse 2 5.0 mph
- Reverse 3 8.8 mph
Service Refill Capacities
- Cooling System 20.3 gal
- Engine Crankcase 10.0 gal
- Final Drives (each) 3.3 gal
- Fuel Tank 170.0 gal
- Hydraulic Tank 19.8 gal
- Pivot Shaft Compartment 10.6 gal
- Power Train 41.0 gal
- Roller Frames (each) 17.2 gal
Standards
- Brakes Standards
- FOPS Standards
- ROPS Standards
Blades
- 8A – Capacity (SAE J1265) 6.1 yd3
- 8A – Digging Depth 22.7 in
- 8A – Ground Clearance 48.1 in
- 8A – Height 5.32 ft
- 8A – Maximum Tilt 36.0 in
- 8A – Total Operating Weight (with Blade and Single-Shank Ripper) 83324.0 lb
- 8A – Weight (without hydraulic controls) 11345.0 lb
- 8A – Width (over end bits) 14.8 ft
- 8SU – Capacity (SAE J1265) 11.4 yd3
- 8SU – Digging Depth 22.6 in
- 8SU – Ground Clearance 48.2 in
- 8SU – Height 5.5 ft
- 8SU – Maximum Tilt 34.8 in
- 8SU – Total Operating Weight (with Blade and Single-Shank Ripper) 87733.0 lb
- 8SU – Weight (without hydraulic controls) 10557.0 lb
- 8SU – Width (over end bits) 14.0 ft
- 8SU LGP – Capacity (SAE J1265) 15.3 yd3
- 8SU LGP – Digging Depth 22.6 in
- 8SU LGP – Ground Clearance 48.2 in
- 8SU LGP – Height 5.71 ft
- 8SU LGP – Maximum Tilt 37.5 in
- 8SU LGP – Total Operating Weight (with Blade and Single-Shank Ripper) 88974.0 lb
- 8SU LGP – Weight (without hydraulic controls) 11800.0 lb
- 8SU LGP – Width (over end bits) 16.3 ft
- 8U – Digging Depth 24.7 in
- 8U – Ground Clearance 51.5 in
- 8U – Height 3.85 ft
- 8U – Maximum Tilt 28.7 in
- 8U – Total Operating Weight (with Blade and Single-Shank Ripper) 89210.0 lb
- 8U – Weight (without hydraulic controls) 12035.0 lb
Hydraulic Controls
- Bulldozer Relief Valve Setting 3480.0 psi
- Pump Output (Implement) 60.0 gal/min
- Pump Output (Steering) 73.0 gal/min
- Pump Type Piston-type, Variable Displacement
- Ripper (Lift) Relief Valve Setting 3480.0 psi
- Ripper (Pitch) Relief Valve Setting 3480.0 psi
- Steering 5700.0 psi
- Tilt Cylinder Head End Flow 45.0 gal/min
- Tilt Cylinder Relief Valve Setting 3480.0 psi
- Tilt Cylinder Rod End Flow 34.0 gal/min
Ripper
- Multi-Shank, Adjustable Parallelogram – Maximum Clearance Raised (under tip, pinned in bottom hole) 23.35 in
- Multi-Shank, Adjustable Parallelogram – Number of Pockets 3
- Multi-Shank, Adjustable Parallelogram – Overall Beam Width 97.0 in
- Single-Shank, Adjustable Parallelogram – Maximum Clearance Raised (under tip, pinned in bottom hole) 23.35 in
- Single-Shank, Adjustable Parallelogram – Maximum Penetration (standard tip) 30.7 in
- Single-Shank, Adjustable Parallelogram – Maximum Penetration Force (shank vertical) 27920.0 lb
- Single-Shank, Adjustable Parallelogram – Pry out Force 51230.0 lb
- Single-Shank, Adjustable Parallelogram – Weight (without hydraulic controls) 10752.0 lb
Winch
- Cable Ferrule Sizes – Length 2.76 in
- Cable Ferrule Sizes – Outside Diameter 2.36 in
- Drum Capacity – Optional Cable 193.0 ft
- Drum Capacity – Recommended Cable Size 276.0 ft
- Drum width 12.6 in
- Flange Diameter 18.0 in
- Increased Tractor Length 22.2 in
- Oil Capacity 4.0 gal
- Optimal Cable Size 1.25 in
- Recommended Cable Size 1.13 in
- Weight* 3947.0 lb
- Winch Case Width 45.6 in
- Winch length 56.3 in
- Winch Model PA14OVS
Undercarriage – Standard
- Ground Clearance 24.1 in
- Ground Contact Area 6060.0 in2
- Ground Pressure (ISO 16754) 13.0 psi
- Grouser Height 3.1 in
- Length of Track on Ground 126.0 in
- Pitch 8.5 in
- Shoe Type Moderate Service
- Shoes/Side 44
- Track Gauge 82.0 in
- Track Rollers per Side 8
- Width of Shoe 24.0 in
Undercarriage – LGP
- Ground Clearance 24.1 in
- Ground Contact Area 9593.0 in2
- Ground Pressure (ISO 16754) 7.8 psi
- Grouser Height 3.1 in
- Length of Track on Ground 126.0 in
- Pitch 8.5 in
- Shoe Type Moderate Service
- Shoes/Side 44
- Track Gauge 92.0 in
- Track Rollers per Side 8
- Width of Shoe 38.0 in
Caterpillar D8T (Tier 4 Interim/Stage IIIB) Base Reviews
0.0
Overall
Based on 0 Reviews
Write Review
Frequently Asked Questions
The D8T base is described as a reliable, older yet trusted model known for its exceptional performance and efficiency. It is designed to work continuously in tough conditions, with robust cooling systems and fuel management ensuring smooth operation even in high temperatures.
The Caterpillar D8T features a Cat® C15 ACERT™ Engine. Its peak power varies depending on the standard, achieving 359.0 hp (ISO 14396), 364.0 hp (DIN), or 363.0 hp (SAE J1995).
The standard Operating Weight for the D8T is listed at 87733.0 lb. The Low Ground Pressure (LGP) configuration has an Operating Weight of 83324.0 lb, while the corresponding Shipping Weight – LGP is 74075.0 lb.
The key service fluid capacities include 170.0 gal for the Fuel Tank, 19.8 gal for the Hydraulic Tank, and 20.3 gal for the Cooling System. There is also a dedicated 41.0 gal capacity designated for the Power Train.
Yes, MotorBazee provides an EMI Calculator to estimate payments. The loan interest rate listed is 14%, and payment options can be calculated over periods up to 84 months.
The model supports two types of undercarriages: Standard, with a Ground Pressure of 13.0 psi and a Track Gauge of 82.0 in; and LGP, which offers a lower Ground Pressure of 7.8 psi and has a wider Track Gauge of 92.0 in.
