Caterpillar D9T Base
Ex-showroom Price
Price not available
Variants
Caterpillar D9T Base Truck Description
The Caterpillar D9T Base dozer is a legend in the mining and quarrying industry. Its massive blade and powerful engine give it the strength to move tons of material. Its design allows it to work in the most extreme conditions without stopping. Visit MotorBazee to check its ripping capacity and powertrain details. If your work is large, this dozer is the most cost-effective investment.
Key Specifications of Caterpillar D9T Base Equipment
Calculate Caterpillar D9T Base Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar D9T Base
Engine
- Emissions U.S. EPA Tier 4 Final and EU Stage IV
- Engine Model Cat® C18 ACERT™
- Flywheel Power 436.0 hp
- Net SAE J1349/ISO 9249 436.0 hp
Weights
- Operating Weight 106618.0 lb
- Shipping Weight 80062.0 lb
Transmission
- 1 Forward - Drawbar Pull (1000) 161.0 lbf
- 2 Forward - Drawbar Pull (1000) 90.0 lbf
- 3 Forward - Drawbar Pull (1000) 50.0 lbf
- Forward 1 2.4 mph
- Forward 2 4.2 mph
- Forward 3 7.3 mph
- Reverse 1 2.9 mph
- Reverse 2 5.2 mph
- Reverse 3 8.9 mph
Service Refill Capacities
- Cooling System 25.9 gal
- DEF Tank 9.5 gal
- Engine Crankcase* 9.7 gal
- Final Drives (each) 3.9 gal
- Fuel Tank 217.0 gal
- Hydraulic Tank Oil (only) 23.5 gal
- Note *With oil filters.
- Pivot Shaft Compartment 7.9 gal
- Power Train 43.3 gal
- Roller Frames (each) 11.9 gal
Standards
- FOPS FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
- ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine
Dimensions
- Drawbar Height (Center of Clevis) 30.0 in
- Ground Clearance 23.5 in
- Height (FOPS Cab) 150.4 in
- Height (ROPS/Canopy) 157.5 in
- Height (Top of Stack) 152.6 in
- Length Basic Tractor with Drawbar 206.4 in
- Length Basic Tractor with Winch 218.3 in
- Length of Track on Ground 136.6 in
- Length with Multi-Shank Ripper 257.4 in
- Length with Single-Shank Ripper 257.0 in
- Length with SU-Blade 259.9 in
- Length with U-Blade 274.3 in
- Overall Length (SU-Blade/SS Ripper) 323.6 in
- Overall Length Basic Tractor 193.3 in
- Track Gauge 88.6 in
- Width over Trunnions 130.3 in
- Width without Trunnions (Standard Shoe) 113.0 in
Hydraulic Controls
- Lift Cylinder Relief Valve Setting 3800.0 psi
- Pump Output (Implement) 60.0 gal/min
- Pump Output (Steering) 102.0 gal/min
- Pump Type Piston-type pump geared from flywheel
- Ripper (Lift) Relief Valve Setting 3800.0 psi
- Ripper (Pitch) Relief Valve Setting 3800.0 psi
- Steering System Pressure 5875.0 psi
- Tank Capacity 23.5 gal
- Tilt Cylinder Head End Flow 50.0 gal/min
- Tilt Cylinder Relief Valve Setting 2800.0 psi
- Tilt Cylinder Rod End Flow 37.0 gal/min
Undercarriage
- Ground Clearance 23.5 in
- Ground Contact Area 6569.0 in2
- Grouser Height 3.3 in
- Length of Track on Ground 136.6 in
- Number of Carrier Rollers 1 per side (optional)
- Pitch 9.4 in
- Shoe Type Extreme Service
- Shoes/Side 43
- Track Gauge 88.6 in
- Track Rollers/Side 8
- Width of Shoe 24.0 in
Winch
- Drum width 12.9 in
- Flange Diameter 24.0 in
- Increased Tractor Length 21.9 in
- Note *Weight includes pump and operator controls. With counterweight: 3705 kg (8,169 lb).
- Oil Capacity 4.0 gal
- Overall Winch 48.3 in
- Weight* 3947.0 lb
- Winch Model PA 140VS
Engine - U.S. EPA Tier 4 Final/EU Stage IV
- Bore 5.7 in
- Displacement 1104.0 in3
- Engine Model Cat C18 ACERT
- Engine Power - Gross SAE J1995* 469.0 hp
- Engine Power - ISO 14396 460.0 hp
- Engine Power - Net Power SAE J1349/ISO 9249 436.0 hp
- Note *Excludes all fan losses.
- Stroke 7.2 in
Caterpillar D9T Base Reviews
0.0
Overall
Based on 0 Reviews
Write Review
