Caterpillar MD5050 Track
Ex-showroom Price
Price not available
Variants
Caterpillar MD5050 Track Truck Description
The Caterpillar MD5050 Track Drill Machine is renowned for its durability and high-speed drilling. Even in tough rock conditions, this machine works non-stop. Its compact design makes it easy to move and transport. Visit MotorBazee for engine performance and drill pipe capacity details, making it a reliable partner for quarry and infrastructure projects.
Key Specifications of Caterpillar MD5050 Track Equipment
Calculate Caterpillar MD5050 Track Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Caterpillar MD5050 Track
Specifications
- Air Compressor 7 m3/min @ 10.2 bar (250 ft3/min @ 150 psi)
- Hole Depth 31 m (102.5 ft) - Maximum Depth
- Hole Diameter 63.5 mm-102 mm (2.5 in-4.0 in)
Hydraulic System
- Components 1 Full flow 5 micron filtration
- Components 2 Hydraulic test ports
- Components 3 Smart Drill drilling control system
- Components 4 Pressure compensated axial piston pumps running at 2,340 rpm
- Components 5 Pressure compensated, load sensing piston pump
- Components 6 Convenient pressure gauges and test taps installed
- Components 7 Full flow cooling
- Fill Pump 379.0 L
Cab
- Components 1 CB Radio (optional)
- Components 10 ROPS/FOPS certified
- Components 11 Emergency egress
- Components 12 Digital engine and drill readout system
- Components 13 Joysticks in both arm rests
- Components 2 Tinted sliding windows
- Components 3 Reversing camera
- Components 4 Heater/AC pressurizer and coils mounted in cab
- Components 5 Front washer and wiper
- Components 6 AM/FM radio
- Components 7 Auxiliary input
- Components 8 12V plug
- Components 9 Six way adjustable seat; forward/back, up/down and reclining
- Noise Rating less than 80 dB(A)
- Total Glass 3.07 m2
Power Train
- Altitude Before Derating 2286.0 m
- Ambient Temperature Capability 52.0 ° C
- Components 28,000 Series gearbox
- Components 1 Dual element air filter
- Fuel Tank – Dual Fill 303.0 L
- Tier 3, 4 cylinder inline turbocharged, water-cooled, direct injection 150 kW at 2,100 rpm (203 hp at 2,100 rpm)
Undercarriage
- Components 1 Hydraulic motor-driven track assemblies with towing disconnects
- Components 2 Spring applied disc brakes
- Components 3 Triple rock grousers
- Components 4 B-3 Excavator
- Gradeability 35.0 Degrees
- Ground Clearance 380.0 mm
- Ground Pressure 0.82 bar
- Track Gauge 198.0 cm
- Track Oscillation ±10 deg
- Tram Maximum Speed 4.0 km/h
- Wide Triple Grouser Pads 300.0 mm
General Data
- Compressor 7 m3/min @ 10.2 bar (250 ft3/min @ 150 psi)
- Engine Tier 3, 4 cylinder inline turbocharged, water-cooled, direct injection, 150 kW (203 hp) at 2,100 rpm
- Hole Depth Maximum 31.0 m
- Hole Diameter Range 63.5 mm-102 mm (2.5 in-4.0 in)
- Rock Drill HPR4519 19.0 kW
WEIGHT
- Shipping Weight (base machine) 12700.0 kg
HYDRAULIC SYSTEMS
- Components Full flow 5 micron filtration
- Components 1 Hydraulic test ports
Boom System
- Boom Dump Below Horizontal 29.0 Degrees
- Boom Extension (inner boom extension) 0.6 m
- Boom Length 3.04 m
- Boom Lift Above Horizontal 36.0 Degrees
- Boom Swing 14° L to 19° R
Dimensional Specifications and Weights
- Shipping Height 3.2 m
- Shipping Length 10.7 m
- Shipping Width 2.6 m
Cooler Package
- Components 1 AKG four vertical sections; compressor, engine, hydraulic and air after cooler
- Components 2 Fan drive with temperature compensated speed control
- Components 3 Sized for ambient capability of 52° C (125° F)
- Cooler Package 7 m3/min ( 250 ft3/min)
- Fan Assembly 76.0 cm
Air Compressor
- Components 1 Dual filter elements
- Components 2 Direct driven by poly chain (belt) from gearbox
- Components 3 Intake check valve and receiver-separator combination tank
- Screw-Type Compressor – Adjustable 118 L/sec @ 10.2 bar (250 ft3/min @ 150 psi)
Shutdown Features
- Causes 1 High compressor discharge temperature
- Causes 2 High engine-water temperature
- Causes 3 Low engine-oil pressure
- Causes 4 Hydraulic test ports for troubleshooting
- Causes 5 Feed-mounted emergency stop cable
Dust Collecting System
- Abrasive Resistant Suction Hose 152.4 mm
- Components 1 Pneumatic filter purge system
- Components 2 Reverse pulse filter cleaning system
- Components 3 Feed-mounted dual axis precleaner
- Components 4 Hydraulically operated and positional dust pickup pot
- Components 5 Hydraulic motor powered, dry dust collecting system
- Components 6 Dust collector sized to clean holes up to 101.6 mm (4 in) in diameter
- Components 7 Bottom change filter elements quantity
- Filter Area 30.6 m2
Smart Drill Drilling System
- Monitoring System 1 Monitors main hydraulic system (hammer, feed, air and rotation pressure) and automatically adjusts to pre-programmed parameters
- Monitoring System 2 Minimizes overfeeding
- Monitoring System 3 Anti-plug
- Monitoring System 4 Anti-plunge
- Monitoring System 5 Anti-jam
- Monitoring System 6 Operator-selected, smooth, electrical control system for all drilling functions
Feed System
- Chain Force 3347.0 kg
- Components 1 Model UFH16 hydraulic motor driven steel channel feed
- Components 2 Power centralizer
- Components 3 Manual inclinator
- Components 4 Will accept 6.1 m (20 ft) starter steel
- Components 5 Set up for 45 mm drill steel
- Components 6 Drill steel thread lubrication
- Components 7 Replaceable wear pads with adjusters
- Dump 139° from 0° of boom
- Feed Channel 177.8 mm
- Feed Extension 0.91 m
- Feed Rate 27.7 m/min
- Feed Swing 36° L to 37° R
Carousel Rod Changer System
- 3.66 m (12 ft) Rod Changer 45 mm – 6 Rod +1 or 51 mm – 6 Rod +1
- 3.66 m (12 ft) Rod Changer 2 Total hole depth 27.4 m (90 ft) with 6.1 m (20 ft) starter steel
- 4.27 m (14 ft) Rod Changer 45 mm – 6 Rod +1 or 51 mm – 6 Rod +1
- 4.27 m (14 ft) Rod Changer 2 Total hole depth 31 m (102 ft) with 6.1 m (20 ft) starter steel
Rock Drill
- HPR4519 Hydraulic Powered Percussion Rock Drill – Blow Rate 2500-2700 bpm
- HPR4519 Hydraulic Powered Percussion Rock Drill – Motors Dual hydraulic variable rotation motors producing 908 N∙m (670 lbf-ft) torque
- HPR4519 Hydraulic Powered Percussion Rock Drill – Output Energy @ 240 rpm 19.0 kW
- HPR4519 Hydraulic Powered Percussion Rock Drill – Percussion Pressure Up to 200 bar (Up to 2,900 psi)
- HPR4519 Hydraulic Powered Percussion Rock Drill – Rock Drill Auto Lube System Optional
- HPR4519 Hydraulic Powered Percussion Rock Drill – Rod Diameter 45 mm
- HPR4519 Hydraulic Powered Percussion Rock Drill – Weight 299.0 kg
- Optional HPR5123 Rock Drill – Blow Rate 2500-2700 bpm
- Optional HPR5123 Rock Drill – Motors Dual hydraulic variable rotation motors producing 1356 N∙m (1,000 lbf-ft)
- Optional HPR5123 Rock Drill – Output Energy @ 160 rpm 23.0 kW
- Optional HPR5123 Rock Drill – Percussion Pressure Up to 200 bar (Up to 2,900 psi)
- Optional HPR5123 Rock Drill – Rod Diameter Choices 45 or 51 mm
- Optional HPR5123 Rock Drill – Weight 397.0 kg
Safety
- Special Features 1 Three points of contact at all steps
- Special Features 2 Standard cabs have front window push-out for emergency egress
- Special Features 3 Emergency stop in the cab and on the feed
- Special Features 4 Shutoff pedal in the cab
- Special Features 5 Feed swipe rope engine shut off
- Special Features 6 Spring-applied, hydraulically released brakes
- Special Features 7 Ground-level access to service points and well organized electrical and hydraulic designs
- Special Features 8 Heavy duty steps and handles are strategically placed and non-slip
- Special Features 9 All proper guards in place
Caterpillar MD5050 Track Reviews
0.0
Overall
Based on 0 Reviews
Write Review
Frequently Asked Questions
The Caterpillar MD5050 Track Drill Machine is highly valued for its durability and high-speed drilling capabilities. It performs effectively even in tough rock conditions, maintaining continuous operation. Its compact design also makes it easy to move and transport, establishing itself as a reliable machine for quarry and infrastructure projects.
The drill has a maximum hole depth of 31.0 meters (102.5 feet). The diameter range for the hole it can handle is between 63.5 mm and 102 mm, which corresponds to 2.5 inches to 4.0 inches.
Yes, it includes several advanced systems. The Smart Drill Drilling System monitors main hydraulic system pressures (hammer, feed, air, and rotation) and automatically adjusts to programmed parameters. It also features anti-plug, anti-plunge, and anti-jam monitoring for safe operation.
The hydraulic system comprises several elements, including a full flow 5 micron filtration, three hydraulic test ports, and a smart drill drilling control system. The pumps include pressure compensated axial piston pumps running at 2,340 rpm and pressure compensated, load sensing piston pumps.
The power train is powered by a Tier 3, 4 cylinder inline turbocharged, water-cooled, direct injection engine. It generates 150 kW (203 hp) at 2,100 rpm, and the machine has an ambient temperature capability of up to 52.0 °C.
It utilizes a hydraulically operated, dry dust collecting system that is sized to clean holes up to 101.6 mm (4 inches) in diameter. This system features components like a pneumatic filter purge and a reverse pulse filter cleaning system.
The shipping weight of the base machine is 12700.0 kg. Its dimensional specifications include a shipping length of 10.7 m, a shipping width of 2.6 m, and a shipping height of 3.2 m.
