Caterpillar-MD6290

Caterpillar MD6290 Rotary

Write a review

0 Reviews

Ex-showroom Price

Price not available

Variants

Specifications of Caterpillar MD6290 Rotary

Specifications

  • Bit Load up to 29 000 kg (up to 63,934 lb)
  • Engine C15 (Tier 3) – 403 kW (540 hp) at 2,100 rpm
  • Hole Diameter 152 – 270 mm (6.0 – 10.6 in)
  • Multi-Pass Hole Depth (10 m Mast) Up to 52.7 m (173 ft)
  • Multi-Pass Hole Depth (11 m Mast) Up to 32.3 m (106 ft)
  • Multi-Pass Hole Depth (8 m Mast) Up to 45.1 m (148 ft)
  • Single-Pass Hole Depth (10 m Mast) Up to 10.1 m (33 ft 2 in)
  • Single-Pass Hole Depth (11 m Mast) Up to 11.0 m (36 ft)
  • Single-Pass Hole Depth (8 m Mast) Up to 8.6 m (28 ft 2 in)
  • Working Weight (Approximate) 54500.0 kg

Hydraulic System

  • Accessory Circuit/Feed Pump (Open-loop) – Maximum flow 283.0 L/min
  • Accessory Circuit/Feed Pump (Open-loop) – Pressure rating 230.0 bar
  • Accessory Circuit/Feed Pump (Open-loop) – Type Axial piston, variable volume
  • Fan Circuit Pump – Maximum flow (dual fan) 246.0 L/min
  • Fan Circuit Pump – Maximum flow (single fan) 216.0 L/min
  • Fan Circuit Pump – Pressure rating 207.0 bar
  • Fan Circuit Pump – Type Gear
  • Fan Drive Motor(s) – Dual fan 2
  • Fan Drive Motor(s) – Pressure rating (continuous) 414.0 bar
  • Fan Drive Motor(s) – Single fan 1
  • Fan Drive Motor(s) – Type Piston
  • Filtration (all filters have indicators and bypass) – Case return 12 micron absolute
  • Filtration (all filters have indicators and bypass) – Charge 3 micron, 1 per loop
  • Filtration (all filters have indicators and bypass) – Loop 12 micron, 2 per loop (optional)
  • Filtration (all filters have indicators and bypass) – Main return 12 micron absolute
  • Left Track/Rotation Pump (Closed-loop) – Maximum flow 262.0 L/min
  • Left Track/Rotation Pump (Closed-loop) – Pressure rating 380.0 bar
  • Left Track/Rotation Pump (Closed-loop) – Type Axial piston, variable volume
  • Pump Drive Gearbox – Drive Rubber coupler/drive shaft to front of engine
  • Pump Drive Gearbox – Type 3 pad
  • Right Track Pump (Closed-loop) – Maximum flow 262.0 L/min
  • Right Track Pump (Closed-loop) – Pressure rating 380.0 bar
  • Right Track Pump (Closed-loop) – Type Axial piston, variable volume
  • Rotation Drive Motor – Pressure rating 345.0 bar
  • Rotation Drive Motor – Type Axial piston variable volume
  • Track Drive Motors (2) – Pressure rating 414.0 bar
  • Track Drive Motors (2) – Two-speed 107/125 cc
  • Track Drive Motors (2) – Type Bent axis fixed volume

Undercarriage

  • Brake release Automatic
  • Brakes Spring set, hydraulic release
  • Final drive Independent hydrostatic, 2-speed motors
  • Front Three-point oscillating type
  • Gradeability mast down 32%
  • Maximum drive horsepower per track 152.0 kW
  • Number of rollers on each side 10
  • Overall length (variable with adjustment) 5080.0 mm
  • Pad type Triple grouser
  • Pad width 750.0 mm
  • Rear axle (solid) 203.0 mm
  • Rock guards/chain guides Standard full-length guards
  • Rollers Sealed, oil-flooded
  • Track adjustment means Hydraulic with grease gun
  • Track drive disconnect Standard (manual)
  • Tram speed maximum 3.14 km/h
  • Type Excavator type
  • Upper track chain support Two (2) carrier rollers
  • Width over tracks 3912.0 mm

RATED CAPACITY

  • Bit/hole diameter 152-270 mm (6-10.625 in)
  • Depth multi-pass (10 m/32 ft 9¾ in mast) Up to 52.7 m (Up to 173 ft 0 in)
  • Depth multi-pass (11 m/36 ft 0 in mast) Up to 32.3 m (Up to 106 ft 0 in)
  • Depth multi-pass (8 m/26 ft 3 in mast) Up to 45.1 m (Up to 148 ft 0 in)
  • Depth single-pass (10 m/32 ft 9¾ in mast) Up to 10.1 m (Up to 33 ft 2 in)
  • Depth single-pass (11 m/36 ft 0 in mast) Up to 11.0 m (Up to 36 ft 0 in)
  • Depth single-pass (8 m/26 ft 3 in mast) Up to 8.6 m (Up to 28 ft 2 in)

OPERATING TEMPERATURE

  • Altitude Up to 4572 m (Up to 15,000 ft)
  • Cold weather option -40.0 ° C
  • Maximum ambient rating (standard) 52.0 ° C
  • Minimum ambient rating (standard) -28.0 ° C

PULL-DOWN/HOISTING CAPACITY

  • Adjustable head guide shoes Steel with replaceable Nylatron™
  • Cable sheaves (cylinder) – outside diameter 406.0 mm
  • Cable sheaves (top and bottom) – outside diameter 559.0 mm
  • Cable type – 25 mm (1 in) DYFORM 8
  • Cylinder bore – diameter 178.0 mm
  • Cylinder rod – diameter 127.0 mm
  • Feed rate 0-42.9 m/min (0-141 ft/min)
  • Head travel (10 m/32 ft 9¾ in mast) 11.79 m
  • Head travel (11 m/36 ft 0 in mast) 12.5 m
  • Head travel (8 m/26 ft 3 in mast) 10.26 m
  • Number of cylinders 1
  • Pull-down cylinder stroke (10 m/32 ft 9¾ in mast) 5.89 m
  • Pull-down cylinder stroke (11 m/36 ft 0 in mast) 6.25 m
  • Pull-down cylinder stroke (8 m/26 ft 3 in mast) 5.1 m
  • Rated hoist capacity Up to 210 kN (Up to 47,100 lbf)
  • Rated pull-down capacity Up to 267 kN (Up to 60,000 lbf)
  • Retract rate 0-44.8 m/min (0-147 ft/min)
  • Sheave guards Standard at bottom plate
  • Type Open-loop, hydraulic (stationary barrel, moving rod)

ROTARY DRIVE SYSTEM

  • Drive motor See Hydraulic System
  • Gearbox Casting design
  • Gearing Straight spur
  • Horsepower capacity 139.0 kW
  • Lubrication Oil flooded
  • Main thrust bearing Taper roller
  • Ratio 16:1
  • Rotation speed 0-220 rpm
  • Torque 0-12 880 N·m (0-9,500 lbf-ft)

MAST

  • Construction ASTM 500 grade B rectangular tubing, welded
  • Hose rack Sheet steel trough for moving hoses
  • Hydraulic lines Pressure-rated steel hydraulic tubing
  • Main chord size – Front 203 mm × 102 mm × 6 mm (8 in × 4 in × 0.25 in)
  • Main chord size – Rear 102 mm × 102 mm × 13 mm (4 in × 4 in × 0.5 in)
  • Pivot and raising area Rectangular tubing A frame; reinforced in high-stress areas
  • Table hole diameter (diameter deck hole for guide bushing) 279.0 mm

MAST - ELEVATING CYLINDERS

  • Cylinder bore diameter 178.0 mm
  • Cylinder connection pins diameter 45.0 mm
  • Cylinder rod diameter 89.0 mm
  • Cylinder stroke 965.0 mm
  • Lift capacity each cylinder 471.0 kN
  • Number of cylinders 2

OPERATOR’S CAB

  • Climate Control Wall mounted, AC/heating/pressurizing unit
  • Construction 12 gauge steel welded to formed 12 gauge channel and angle supports
  • Door latches Heavy-duty latches with lockable handles
  • Floor area 3.0 m2
  • Height inside 1943.0 mm
  • Helper’s seat Fixed folding jump seat
  • Insulation, floor [closed-cell foam with 3 mm (0.125 in) pyramid vinyl surface] 10.0 mm
  • Insulation, wall and ceiling (thermal) 25.0 mm
  • Left door to work deck Swing-type, HD hinge
  • Length at floor 1981.0 mm
  • Location To the right from the mast if facing rear deck from the rear end
  • Number of doors 2 with windows (included in above)
  • Number of windows 10
  • Operator’s seat One swivel-type with armrests, headrest and retractable seatbelt
  • Other Window wipers and washers
  • Right door Swing-type, HD hinge
  • Sound levels 80 dB(A) or less
  • Type Shock-mounted; two-man, integrated FOPS certified
  • Width at floor 1518.0 mm
  • Windows (tinted safety glass in rubber mounting) 6.0 mm

MAINFRAME

  • Construction Electric welded
  • Handrails - Diameter 48.0 mm
  • Handrails - Height 1219.0 mm
  • Jacks, mast pivot and deck Welded integrally to mainframe
  • Machine deck Access both sides
  • Main rails (ASTM 500 Grade B rectangular tubing heavily cross-braced and reinforced at high-stress areas) 203 mm × 406 mm × 13 mm (8 in × 16 in × 0.5 in)
  • Toolbox Lockable door, below cab side walkway
  • Tow hooks Welded, two (2) front

DRILL TABLE AND WORK DECK

  • Deck floor material Non-skid sheet metal
  • Drill deck area 6.86 m2
  • Drill deck length 2661.0 mm
  • Drill deck width 2578.0 mm
  • Hand rails – Diameter 48.0 mm
  • Hand rails – Height 1219.0 m
  • Table height off ground 1321.0 mm

DUST CURTAIN (OPTIONAL HYDRAULIC LIFTERS, FRONT AND REAR)

  • Dust deflector Natural rubber seal
  • Dust deflector – Diameter 356.0 mm
  • Dust deflector – Thickness 13.0 mm
  • Enclosed area 4.2 m2
  • Location Directly below table bushing
  • Material (rubber nylon reinforced) 6.0 mm
  • Split for excess Front and rear with 305 mm (12 in) overlap

OIL COOLING SYSTEM (HYDRAULIC TANK)

  • Reservoir pressure Atmospheric, filtered breather
  • Reservoir with sight and temperature gauge 644.0 L

LUBRICATION

  • Type Centralized manual (optional auto-lubrication)

Caterpillar MD6290 Rotary Pictures

Select Equipment Dealers by Brand and City

Caterpillar MD6290 Rotary Reviews

Overall

Based on 0 Reviews

Write Review

Write Truck Review

Your Mobile Number will not be published. Required fields are marked *

Your Rating

Your Review*