Caterpillar PMC-D/PMC-D20 Mining Controls

Specifications of Caterpillar PMC-D/PMC-D20 Mining Controls

Components

• Operating System µITRON RTOS
• Processor 32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
• RAM Memory 4Mbytes CMOS Static RAM, 4Mbytes Flash

Global Certifications

• Types 1 Europe: ATEX
• Types 2 U.S.: MSHA
• Types 3 More certifications on demand
• Types 4 Australia: IECEx, ANZEx
• Types 5 China: MA
• Types 6 Russia: GOST

Electrical Data

• Supply Current – Maximum Ratings 1.5 amps
• Supply Current – Typical Value 1.0 amps
• Supply Voltage – Maximum Ratings 9.5 V – 13.2 V
• Supply Voltage – Typical Value 12 V DC

Environmental Data

• Temperature – Maximum Ratings –20° C – +40° C (–4° F – +104° F)
• Temperature – Symbol Tamb
• Temperature – Typical Value 20.0 ° C

Electrical Sockets

• Socket 1 – Pin 1 Optocoupler Anode
• Socket 1 – Pin 2 Relay Contact NO: a
• Socket 1 – Pin 3 Relay Contact NO: b
• Socket 1 – Pin 4 Optocoupler Cathode
• Socket 10 – Pin 1 +12 V (output)
• Socket 10 – Pin 2 Multi Mode Input 3
• Socket 10 – Pin 3 +8.2 V (output )
• Socket 10 – Pin 4 GND
• Socket 11 – Pin 1 +12 V (output )
• Socket 11 – Pin 2 Multi Mode Input 6
• Socket 11 – Pin 3 +8.2 V (output)
• Socket 11 – Pin 4 GND
• Socket 12 – Pin 2 TP a
• Socket 12 – Pin 3 TP b
• Socket 13 – Pin 2 CM-Sensor +
• Socket 13 – Pin 3 CM-Sensor –
• Socket 13 – Pin 4 CM-GND
• Socket 14 – Pin 2 CM-Sensor +
• Socket 14 – Pin 3 CM-Sensor –
• Socket 14 – Pin 4 CM- GND
• Socket 15 – Pin 2 CM-Sensor +
• Socket 15 – Pin 3 CM-Sensor –
• Socket 15 – Pin 4 CM-GND
• Socket 16 – Pin 2 CM-Sensor +
• Socket 16 – Pin 3 CM-Sensor –
• Socket 16 – Pin 4 CM-GND
• Socket 17 – Pin 2 CM-Sensor +
• Socket 17 – Pin 3 CM-Sensor –
• Socket 17 – Pin 4 CM-GND
• Socket 18 – Pin 2 CM-Sensor +
• Socket 18 – Pin 3 CM-Sensor –
• Socket 18 – Pin 4 CM- GND
• Socket 19 – Pin 2 CM-Sensor +
• Socket 19 – Pin 3 CM-Sensor –
• Socket 19 – Pin 4 CM-GND
• Socket 2 – Pin 1 +12 V (A) ( output )
• Socket 2 – Pin 2 Serial Interface: RxD_0
• Socket 2 – Pin 3 Serial Interface: TxD_0
• Socket 2 – Pin 4 GND
• Socket 20 – Pin 2 CM-Sensor +
• Socket 20 – Pin 3 CM-Sensor –
• Socket 20 – Pin 4 CM-GND
• Socket 3 – Pin 1 +12 V (B) (output)
• Socket 3 – Pin 2 Serial Interface: RxD_B
• Socket 3 – Pin 3 Serial Interface: TxD_B
• Socket 3 – Pin 4 GND
• Socket 4 – Pin 1 +12 V (C) (output )
• Socket 4 – Pin 2 Serial Interface: RxD_C
• Socket 4 – Pin 3 Serial Interface: TxD_C
• Socket 4 – Pin 4 GND
• Socket 5 – Pin 1 +12 V (C) (output)
• Socket 5 – Pin 2 Switch 1
• Socket 5 – Pin 3 Switch 2
• Socket 5 – Pin 4 GND
• Socket 6 – Pin 2 Profibus: a (internal)
• Socket 6 – Pin 3 Profibus: b ( internal )
• Socket 7 – Pin 1 +12 V (Power Supply)
• Socket 7 – Pin 4 GND (Power Supply)
• Socket 8 – Pin 1 Multi Mode Input 4
• Socket 8 – Pin 2 Multi Mode Input 1
• Socket 8 – Pin 3 +8.2 V (output)
• Socket 8 – Pin 4 GND
• Socket 9 – Pin 1 Multi Mode Input 5
• Socket 9 – Pin 2 Multi Mode Input 2
• Socket 9 – Pin 3 +8.2 V (output)
• Socket 9 – Pin 4 GND

HEALTH for Longwall Vibration Analysis

• Provides vibration monitoring functionality for longterm health monitoring of the following longwall related equipment: 1 • CST gearbox and relating motor • UEL gearbox and relating motor
• Provides vibration monitoring functionality for longterm health monitoring of the following longwall related equipment: 2 • Shearer haulage and ranging arm gearboxes • Water/HFA pump station
• Provides vibration monitoring functionality for longterm health monitoring of the following longwall related equipment: 3 • Stage loader gearbox and relating motor • Crusher and relating motor

PMC-D Dimensions and Plug Assignments (Approximate)

• Height 148.0 mm
• Length 335.0 mm
• Width 278.0 mm

PMC-D20 Dimensions and Plug Assignments (Approximate)

• Height 125.0 mm
• Length 335.0 mm
• Width 279.0 mm