Caterpillar PMC-R Mining Controls

Specifications of Caterpillar PMC-R Mining Controls

Components

• Operating System µITRON RTOS
• Processor 16Bit Microcontroller TMP91CW12AF, 27MHz, internal RAM 4Kbytes, ROM 125Kbytes
• RAM Memory 2Mbytes CMOS Static RAM, 4Mbytes Flash

Global Certifications

• Types 1 Europe: ATEX
• Types 2 U.S.: MSHA
• Types 3 More certifications on demand
• Types 4 Australia: IECEx, ANZEx
• Types 5 China: MA
• Types 6 Russia: GOST

Electrical Data

• Supply Current – Maximum Ratings 2.0 amps
• Supply Current – Typical Value 1.0 amps
• Supply Voltage – Maximum Ratings 9.5 V - 13.2 V
• Supply Voltage – Typical Value 12 V DC

Environmental Data

• Temperature – Maximum Ratings -20° C - +40° C (-4° F - +140° F)
• Temperature – Symbol Tamb
• Temperature – Typical Value 20.0 ° C

Dimensions (Approximate) - Front View of the PMC-R

• Height 116.0 mm
• Length 320.0 mm
• Width 178.0 mm

Dimensions (Approximate) - Rear Side View of the PMC-R

• Height 116.0 mm
• Length 320.0 mm
• Width 178.0 mm

Dimensions (Approximate) - Solenoid Driver Module

• Height 37.0 mm
• Length 347.0 mm
• Width 68.0 mm

Pin Assignment of Solenoid Driver Module Type SD1

• Socket S101 - Pin 1 12.0 volts
• Socket S101 - Pin 2 (Solenoid 1) TX
• Socket S101 - Pin 3 (Solenoid 2) RX
• Sockets S301-S306 - Pin 1 12.0 volts
• Sockets S301-S306 - Pin 2 (Solenoid 1) GND1
• Sockets S301-S306 - Pin 3 (Solenoid 2) GND2
• Sockets S301-S306 - Pin 4 GND
• Sockets S307-S311 - Pin 1 12.0 volts
• Sockets S307-S311 - Pin 2 (Solenoid 1) GND1
• Sockets S307-S311 - Pin 3 (Solenoid 2) GND2
• Sockets S307-S311 - Pin 4 0 - 1 mA; 0.5 - 4.5 V