Caterpillar SU482 DN Scoops

Specifications of Caterpillar SU482 DN Scoops

Transmission

• Speeds, Forward and Reverse 3
• Type Power shift with Fwd/Rev mod

Specifications

• Height to Top of Body 685.0 mm
• Height to Top of Cab 864.0 mm
• Length 8763.0 mm
• Payload Capacity 6.8 tonnes
• Width 3098.0 mm

Hydraulic System

• Auxiliary System Open center , HRO Control
• Bucket/PTO System Open center/Motor Spool
• Steer/Brake System Open center, HRO Control
• Tank type Sealed

Dimensions (Approximate)

• Adjustable Cab Height (minimum) – 28x15-15 Tires 965.0 mm
• Adjustable Cab Height (minimum) – 32x15-15 Tires 1016.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 28x15-15 Tires 178.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 32x15-15 Tires 229.0 mm
• Inside turn radius 3581.0 mm
• Main Frame Height – 28x15-15 Tires 864.0 mm
• Main Frame Height – 32x15-15 Tires 914.0 mm
• Outside turn radius 6985.0 mm
• Overall Length – With contoured bucket 8788.0 mm
• Overall Length – With lifting forks 8280.0 mm
• Overall Width – With contoured bucket 3099.0 mm
• Overall Width – With lifting forks 3035.0 mm
• Scoop utility empty weights 12700.0 kg
• Steering articulation 40 °
• Wheelbase 3556.0 mm

Wheels

• Make/Model 3 piece (Heavy Duty)

ELECTRICAL SYSTEM

• Polarity Floating
• Voltage 12

ENGINE SPEEDS

• High Idle 3200.0 RPM
• Low Idle 900.0 RPM

START SYSTEM

• Starter Motor Type Electric, 12 V

INTAKE AIR CLEANER

• Intake Dual Element Type Primary & Secondary
• Type Dry

TORQUE CONVERTER

• Make/Model Dana integral
• Type Mounted on engine, single element

TIRES – STANDARD

• Size: 28x15-15 – Inflation media Urethane Fill
• Size: 28x15-15 – Ply rating Bias
• Size: 32x15-15 – Inflation media Urethane Fill
• Size: 32x15-15 – Ply rating Bias

ARTICULATION

• Bearing type and size Pin & bearing
• Bush material Hardened steel
• Degrees of Turn Either Side 45.0 Degrees
• Pin material Hardened steel

OSCILLATION

• Degrees Up and Down from Horizontal 15.0 Degrees
• Type Ball Bearing at Articulation

SEATING (DRIVER)

• Type Adjustable Cross-seated

CANOPY

• Type Adjustable CAB Certified to MSHA req

LIGHTS

• Number/Location 2 front, 2 rear
• Type Ocenco/MCI

ALTERNATOR

• Drive Electric
• Type Bosch, 12V

SERVICE CAPACITIES

• Fuel Tank 83 L (22 gal) – MSHA Limited
• Hydraulic Tank 151.0 L
• With 32x15-15 Tires – 1st gear max 3.5 km/h
• With 32x15-15 Tires – 2nd gear max 6.4 km/h
• With 32x15-15 Tires – 3rd gear max 16.9 km/h

GRADE ABILITY

• Front to Rear Up to 30 %

HYDRAULIC FILTRATION

• Auxiliary System Pressure 10 micron; Tank mounted, 25 micron
• Bucket/PTO System Pressure 10 micron
• Common Return replaceable bypass
• Steer/Brake System Pressure 10 micron

AXLES (FRONT/REAR)

• Differential Type Bevel gear and pinion
• Make/Model Kessler 42 Series
• Type Outboard Planetary/SAHR Brakes

MAXIMUM TRACTIVE EFFORT

• Reference Refer to engineering for information dependent on the applications

STEERING SYSTEM

• Actuation HRO Control
• Control Valve Open center

ENGINE (4 CYLINDER)

• Maximum Torque Tested 229.0 N·m
• Type Diesel, Turbo Charged, and 4 Cycle
• Cooling Fan Hydraulic driven fan
• Cooling System Oil cooled with water cooled exhaust manifolding (opt water cooled assist for engine)
• Displacement 3.1 L
• Engine Make/Model Deutz BF4L 2011
• Maximum Power Tested 58 kW (78 hp) @ 2,800 rpm

CYLINDERS

• Counterbalance Load Lock Valves Art frame cyls
• Rods Hard chromed
• Type Double acting

ACCUMULATOR BRAKES

• Operation Pre charge 6.2 Mpa (900 psi) – Nitrogen pressure
• Quantity × Capacity 1.9 L
• Type Piston

BUCKET SYSTEM

• Actuation HRO
• Control Valve Open center

Lift and Carry Capacity

• Capacity 6.8 tonnes (7.5 tons) at 914 mm (36 in) from the face of lift plate

Exhaust System

• After Treatment Catalytic exhaust purifier
• DPM Control Disposable filter 97% eff
• Make Caterpillar®
• Type Ultra flow dry scrubber

Main Hydraulic Pump

• Std pump output @ 2,000 rpm 64.0 L/min
• Type Gear

Cooling/Fan Pump

• Std pump output @ 2,000 rpm 17.0 L/ min
• Type Gear